Alejandro García-Gil

Advection and dispersion heat transport mechanisms in the quantification of shallow geothermal resources and associated environmental impacts.

Borehole Heat Exchangers (BHEs) are increasingly being used to exploit shallow geothermal energy. This paper presents a new methodology to provide a response to the need for a regional quantification of the geothermal potential that can be extracted by BHEs and the associated environmental impacts. A set of analytical solutions facilitates accurate calculation of the heat exchange of BHEs with the ground and its environmental impacts. For the first time, advection and dispersion heat transport mechanisms and the temporal evolution from the start of operation of the BHE are taken into account in the regional estimation of shallow geothermal resources. This methodology is integrated in a GIS environment, which facilitates the management of input and output data at a regional scale. An example of the methodologys application is presented for Barcelona, in Spain. As a result of the application, it is possible to show the strengths and improvements of this methodology in the development of potential maps of low temperature geothermal energy as well as maps of environmental impacts. The minimum and maximum energy potential values for the study site are 50 and 1800 W/m(2) for a drilled depth of 100 m, proportionally to Darcy velocity. Regarding to thermal impacts, the higher the groundwater velocity and the energy potential, the higher the size of the thermal plume after 6 months of exploitation, whose length ranges from 10 to 27 m long. A sensitivity analysis was carried out in the calculation of heat exchange rate and its impacts for different scenarios and for a wide range of Darcy velocities. The results of this analysis lead to the conclusion that the consideration of dispersion effects and temporal evolution of the exploitation prevent significant differences up to a factor 2.5 in the heat exchange rate accuracy and up to several orders of magnitude in the impacts generated.

Geochemical impacts of groundwater heat pump systems in an urban alluvial aquifer with evaporitic bedrock.

In the last decade, there has been an extensive use of shallow geothermal exploitations in urban environments. Although the thermal interference between exploitations has been recently studied, there is a lack of knowledge regarding the geochemical impacts of those systems on the aquifers where they are installed. Groundwater flow line scale and well-doublet scale research work has been conducted at city scale to quantify the geochemical interaction of shallow geothermal exploitations with the environment. A comprehensive analysis was conducted on data obtained from a monitoring network specifically designed to control and develop aquifer policies related to thermal management of the aquifer. The geochemical impacts were evaluated from a thermodynamic point of view by means of saturation index (SI) calculations with respect to the different mineral species considered in the system. The results obtained indicate limited geochemical interaction with the urban environment in most of the situations. However, there are some cases where the interaction of the groundwater heat pump installations with the evaporitic bedrock resulted in the total disablement of the exploitation system operation wells. The application of the tool proposed proved to be pragmatic in the evaluation of geochemical impacts. Injection of water into the aquifer can trigger an important bedrock gypsum and halite dissolution process that is partly responsible for scaling in well casing pipes and collapse of the terrain in the vicinity of injection wells.

The thermal impact of subsurface building structures on urban groundwater resources – A paradigmatic example

Shallow subsurface thermal regimes in urban areas are increasingly impacted by anthropogenic activities, which include infrastructure development like underground traffic lines as well as industrial and residential subsurface buildings. In combination with the progressive use of shallow geothermal energy systems, this results in the so-called subsurface urban heat island effect. This article emphasizes the importance of considering the thermal impact of subsurface structures, which commonly is underestimated due to missing information and of reliable subsurface temperature data. Based on synthetic heat-transport models different settings of the urban environment were investigated, including: (1) hydraulic gradients and conductivities, which result in different groundwater flow velocities; (2) aquifer properties like groundwater thickness to aquitard and depth to water table; and (3) constructional features, such as building depths and thermal properties of building structures. Our results demonstrate that with rising groundwater flow velocities, the heat-load from building structures increase, whereas down-gradient groundwater temperatures decrease. Thermal impacts on subsurface resources therefore have to be related to the permeability of aquifers and hydraulic boundary conditions. In regard to the urban settings of Basel, Switzerland, flow velocities of around 1 md-1 delineate a marker where either down-gradient temperature deviations or heat-loads into the subsurface are more relevant. Furthermore, no direct thermal influence on groundwater resources should be expected for aquifers with groundwater thicknesses larger 10m and when the distance of the building structure to the groundwater table is higher than around 10m. We demonstrate that measuring temperature changes down-gradient of subsurface structures is insufficient overall to assess thermal impacts, particularly in urban areas. Moreover, in areas which are densely urbanized, and where groundwater flow velocities are low, appropriate measures for assessing thermal impacts should specifically include a quantification of heat-loads into the subsurface which result in a more diffuse thermal contamination of urban groundwater resources.

A city scale study on the effects of intensive groundwater heat pump systems on heavy metal contents in groundwater.

As a result of the increasing use of shallow geothermal resources, hydraulic, thermal and chemical impacts affecting groundwater quality can be observed with ever increasing frequency (Possemiers et al., 2014). To overcome the uncertainty associated with chemical impacts, a city scale study on the effects of intensive geothermal resource use by groundwater heat pump systems on groundwater quality, with special emphasis on heavy metal contents was performed. Statistical analysis of geochemical data obtained from several field campaigns has allowed studying the spatiotemporal relationship between temperature anomalies in the aquifer and trace element composition of groundwater. The relationship between temperature and the concentrations of trace elements resulted in weak correlations, indicating that temperature changes are not the driving factor in enhancing heavy metal contaminations. Regression models established for these correlations showed a very low reactivity or response of heavy metal contents to temperature changes. The change rates of heavy metal contents with respect to temperature changes obtained indicate a low risk of exceeding quality threshold values by means of the exploitation regimes used, neither producing nor enhancing contamination significantly. However, modification of pH, redox potential, electrical conductivity, dissolved oxygen and alkalinity correlated with the concentrations of heavy metals. In this case, the change rates of heavy metal contents are higher, with a greater risk of exceeding threshold values.

An integrated GIS-based tool for aquifer test analysis

AbstractThe quantification of the hydraulic parameters is important to support decision making in environmental impact assessment, water resources evaluation or groundwater contamination remediation, among others. These kind of parameters derived from aquifer tests usually encompasses a vast amount of data (spatial and non-spatial) for management and analysis. To achieve this in a clear and understandable manner, the GIS environment is a useful instrument. Development of innovative software to analyze pumping tests in a GIS platform environment to support the hydraulic parameterization of groundwater flow and transport models is presented in this paper. This new platform provides three interconnected modules to improve (a) pumping test interpretation code through a user-friendly interface, (b) pumping test data visualization supported by a set of tools that perform spatiotemporal queries in a GIS environment and (c) the storage and management of hydrogeological information. Additionally, within the GIS platform, it is possible to process the hydraulic parameters obtained from the pumping test and to create spatial distribution maps, perform geostatistical analysis and export the information to an external software platform. Finally, a real-world application in the area of Barcelona (Spain) has shown the usefulness of the tools developed in support of hydrogeological analysis.

Decreased waterborne pathogenic bacteria in an urban aquifer related to intense shallow geothermal exploitation

The implications of intensive use of shallow geothermal energy resources in shallow urban aquifers are still not known for waterborne pathogens relevant to human health. Firstly, we hypothesized that waterborne enteric pathogens would be relatively increased in heated groundwater plumes. To prove this, microbiological sampling of 31 piezometers covering the domain of an urban groundwater body affected by microbiological contamination and energetically exploited by 70 groundwater heat pump systems was performed. Mean differences of pathogenic bacteria contents between impacted and non-impacted monitoring points were assessed with a two-tailed independent Students t-test or Mann-Whitney U and correlation coefficients were also calculated. Surprisingly, the results obtained revealed a significant and generalized decrease in waterborne pathogen contents in thermally impacted piezometers compared to that of non-impacted piezometers. This decrease is hypothesized to be caused by a heat shock to bacteria within the heat exchangers. The statistically significant negative correlations obtained between waterborne pathogen counts and temperature could be explained by the spatial distribution of the bacteria, finding that bacteria start to recover with increasing distance from the injection point. Also, different behavior groups fitting exponential regression models were found for the bacteria species studied, justified by the different presence and influence of several aquifer parameters and major, minor and trace elements studied, as well as the coexistence with other bacteria species. The results obtained from this work reinforce the concept of shallow geothermal resources as a clean energy source, as they could also provide the basis to control the pathogenic bacteria contents in groundwater bodies.

Hydrodynamics of salt flat basins: The Salar de Atacama example

The Salar de Atacama is one of the most well-known saline endorheic basins in the world. It accumulates the world main lithium reserves and contains very sensitive ecosystems. The objective of this work is to characterize the hydrodynamics of the Salar de Atacama, and to quantify its complex water balance prior to the intense brine extraction. The methodology and results can be extrapolated to the groundwater flow and recharge of other salt flats. A three-dimensional groundwater flow model using low computational effort was calibrated against hundreds of hydraulic head measurements. The water infiltrated from the mountains ascends as a vertical flux through the saline interface (mixing zone) produced by the density contrast between the recharged freshwater and the evaporated brine of the salt flat nucleus. This water discharges and is largely evaporated from lakes or directly from the shallow water table. On the other hand, the very low hydraulic gradients, coupled with the presence of the mixing zone that operates as barrier, leads the salt flat nucleus to act as a hydrodynamically quasi-isolated area. The computed water table shows the lowest hydraulic head in the salt flat nucleus near the discharge at the mixing zone. The groundwater balance of the Salar de Atacama in its natural regime was quantified resulting in an inflow/outflow of 14.9 m3·s-1. This balance considers the basin as an endorheic system. The very low infiltration values that are generally assumed for hyperarid basins are not consistent with the hydrogeology of the Salar de Atacama. Indeed, very high infiltration rates (up to 85% of rainfall) occur because of the high degree of fracturing of rocks and the scarce vegetation. This high infiltration is consistent with the light isotopic composition of the water from the recharge area (Altiplano). Therefore, the existence of additional inflows outside the basin is unlikely.

Waste Heat Recovery – Considerations for the Management of Thermally Polluted Urban Groundwater Resources

Heating and cooling using groundwater is often performed without considering potential effects on subsurface resources and the multiple interactions of different subsurface utilizations. As a result, significantly increased subsurface temperatures have been observed in many urban areas. The current uncoordinated use of subsurface resources can lead to conflicts among different users and, specifically thermal pollution may lead to large-scale thermal impacts and impairments of groundwater quality.