Alejandro González Orive

Quinone-rich poly(dopamine) magnetic nanoparticles for biosensor applications.

Novel core-shell quinone-rich poly(dopamine)-magnetic nanoparticles (MNPs) were prepared by using an in situ polymerization method. Catechol groups were oxidized to quinone by using a thermal treatment. MNPs were characterized by using X-ray diffraction, X-ray photoelectron spectroscopy, atomic force microscopy, magnetic force microscopy, UV/Vis, Fourier-transform infrared spectroscopy, and electrochemical techniques. The hybrid nanomaterial showed an average core diameter of 17 nm and a polymer-film thickness of 2 nm. The core-shell nanoparticles showed high reactivity and were used as solid supports for the covalent immobilization of glucose oxidase (Gox) through Schiff base formation and Michael addition. The amount of Gox immobilized onto the nanoparticle surface was almost twice that of the nonoxidized film. The resulting biofunctionalized MNPs were used to construct an amperometric biosensor for glucose. The enzyme biosensor has a sensitivity of 8.7 mA M(-1)  cm(-2) , a low limit of detection (0.02 mM), and high stability for 45 days. Finally, the biosensor was used to determine glucose in blood samples and was checked against a commercial glucometer.

New findings for the composition and structure of Ni nanoparticles protected with organomercaptan molecules.

Here we explore the synthesis of alkanethiol-coated Ni NPs following the one-phase reaction method by Brust et al. The reduction of NiCl2 with NaBH4 in the presence of dodecanethiol (C12SH) yields a complex product that is difficult to identify as illustrated in the figure of merit. We synthesized Ni(II) dodecanethiolate (C12S) (without the addition of NaBH4) for comparison and performed an exhaustive characterization with TEM, HR-TEM, AFM, MFM, XPS, XRD, UV-vis, magnetism, and FT-IR. It is found that the organic coating is not quite a well-organized self-assembled monolayer (SAM) surrounding the Ni cluster as previously reported. XPS and XRD data show slight differences between both syntheses; however, Ni(II) thiolate appears to be more stable than reduced Ni when exposed to ambient air, indicating the propensity of metallic Ni to oxidize. It has been shown that irradiating with TEM electrons over various metal thiolates leads to nanoparticle formation. We irradiated over Ni(II) thiolate and observed no evidence of NP formation whereas irradiating a reduced Ni sample exhibited an ~3.0 nm nanoparticle diameter. Magnetism studies showed a difference between both samples, indicating ferromagnetic character for the reduced Ni sample. According to our results, the product of the synthesis is comprised of ultrasmall metallic clusters embedded in some form of Ni(II) C12S. In this work, we open a discussion of the chemical nature of the core and the shell in the synthesis of Ni NPs protected with organomercaptan molecules.

Self-assembly of flagellin on Au(111) surfaces.

The adsorption of flagellin monomers from Pseudomonas fluorescens on Au(111) has been studied by Atomic Force Microscopy (AFM), Scanning Tunneling Microscopy (STM), X-ray Photoelectron Spectroscopy (XPS), Surface Plasmon Resonance (SPR), and electrochemical techniques. Results show that flagellin monomers spontaneously self-assemble forming a monolayer thick protein film bounded to the Au surface by the more hydrophobic subunit and exposed to the environment the hydrophilic subunit. The films are conductive and allow allocation of electrochemically active cytochrome C. The self-assembled films could be used as biological platforms to build 3D complex molecular structures on planar metal surfaces and to functionalize metal nanoparticles.

Microscopy analysis of pyramid formation evolution with ultra-low concentrated Na2CO3/NaHCO3 solution on (100) Si for solar cell application.

An analysis of the nucleation mechanism of pyramids formed in (100) silicon in Na2CO3/NaHCO3 solution has been carried out. This texturization process of silicon by means of Na2CO3/NaHCO3 solutions is of special interest because it can be applied to the silicon solar cell industry to texture solar cell surfaces to decrease the front reflection and enhance light trapping in the cells. For this purpose, two microscopy techniques-scanning electron microscopy and atomic force microscopy-have been used to study the different stages of pyramidal nucleation and formation. The different aspects and factors involved in the texturization process require different analysis conditions and microscopy resolution. Tracing the transformation of determined surface areas and structures has been achieved, contributing clarification of the mechanism of pyramid nucleation in Na2CO3/NaHCO3 solutions.

Electrochemical Preparation and Delivery of Melanin–Iron Covered Gold Nanoparticles

Attractive combination: Biopolymer-modified nanoparticles which combine magnetic properties with biocompatibility are prepared and delivered following a three-step strategy (see figure): i) Adsorption of thiol-capped metal nanoparticles on graphite, ii) electrochemical modification, iii) potential-induced delivery of the modified nanoparticles to the electrolyte. Thiol-capped gold nanoparticles modified with iron-melanin are attractive because they combine magnetic properties and biocompatibility. The biopolymer modified nanoparticles are prepared and delivered following a three step strategy: i) adsorption of thiol-capped metal nanoparticles on graphite, ii) electrochemical deposition of melanin-iron, iii) potential-induced delivery of the modified nanoparticles to the electrolyte.