Aleksander Chrószcz

Morphological analysis of the foramen magnum of dogs from the Iron Age.

The investigations were carried out on 37 skulls from the Van‐Yoncatepe early Iron Age necropolis (in eastern Anatolia) (first group) and 11 skulls from the scythians castle from Bileskoje Iron Age (second group). The major distance between both occipital condyles and both bases of the jugular processes, the major width of the foramen magnum, height of the foramen magnum, height of the skull, height of the occipital triangle and the length of the dorsal notch were measured. A dorsal notch was present in seven dogs (six male and one female) from Van‐Yoncatepe. The average length of the dorsal notch was 2.5 mm. The investigation states that the dorsal notch occurred in dogs from the Iron Age. This anatomical formation had no association with their death.

The Use of Infrared Thermography as a Rapid, Quantitative, and Noninvasive Method for Evaluation of Inflammation Response in Different Anatomical Regions of Rats

Purpose. Thermographic assessment of temperature distribution within the examined tissues allows a quick, noncontact, noninvasive measurement of their temperature. The aim of the study was to evaluate the usefulness of digital infrared imaging in monitoring experimental inflammation of pleura (PL), lower lip (LL), and left paw (LP) and right paw (RP) of lower limbs in rats. Materials and Methods. The inflammatory reaction was induced by injection of 1% carrageenin solution into pleural cavity, lip, or paws. With the use of digital infrared imaging temperature measurement was conducted at 0 to 72 hours of the inflammatory reaction. Results. The temperature decrease was observed at the site of injection directly afterwards. Next, it was gradually increasing and it reached the maximum on the third day of the inflammatory reaction. Statistically significant changes were observed after 48-hour period in PL and LL regions, as well as after 72-hour period in LP and RP regions (P < 0.005). Conclusion. It was found that thermographic examination allows for indicating the presence of inflammatory reaction within examined tissues and determining the dynamics of this process. This method could be used as alternative procedure that allows using fewer animals for experiments.

Immunohistochemical Characterization of Neurones in the Hypoglossal Nucleus of the Pig

With 4 figures and 1 table

Sources of Sensory Innervation of the Hip Joint Capsule in the Rabbit – A Retrograde Tracing Study

The aim of the study was to investigate the sensory innervation of the hip joint capsule in the rabbit. Individual animals were injected with retrograde fluorescent tracer Fast Blue (FB) into the lateral aspect of the left hip joint capsule (group LAT, n = 5) or into the medial aspect of the hip joint capsule (group MED, n = 5), respectively. FB‐positive (FB+) neurons were found within ipsilateral lumbar (L) and sacral (S) dorsal root ganglia (DRG) from L7 to S2 (group LAT) and from L6 to S4 (group MED). They were round or oval in shape with a diameter of 20–90 μm. The neurons were evenly distributed throughout the ganglia. The average number of FB+ neurons was 16 ± 2.8 and 27.6 ± 3.5 in rabbits from LAT and MED, respectively. The largest average number of FB+ neurons in animals of group LAT was found within the S1 DRG (8 ± 1.7), while S2 ganglion contained the smallest number of the neurons (3.6 ± 1). In the L7 DRG, the average number of FB+ neurons was 6.2 ± 1.6. In rabbits of MED group, the largest number of FB+ neurons was found within the S1 DRG (13.4 ± 4), while the smallest one was found within the S3 ganglion (1.4 ± 0.4). In L6, L7, S2 and S4 ganglia, the number of retrogradely labelled neurons amounted to 1.6 ± 0.5, 4 ± 1.5, 4.4 ± 1.5 and 2.8 ± 1.7, respectively. The data obtained can be very useful for further investigations regarding the efficacy of denervation in the therapy of hip joint disorders in rabbits.

Morphological Investigations of the Occipital Area in Adult American Staffordshire Terriers

with 4 figures and 3 tables

JOINT DISEASES IN ANIMAL PALEOPATHOLOGY: VETERINARY APPROACH

Abstract Animal paleopathology is not a very well known scientific discipline within veterinary science, but it has great importance for historical and archaeological investigations. In this paper, authors attention is focused on the description of one of the most common findings on the skeletal remains of animals - osteoarthropathies. This review particularly emphasizes the description and classification of the most common pathological changes in synovial joints. The authors have provided their observations on the importance of joint diseases in paleopathology and veterinary medicine. Analysis of individual processes in the joints of the animals from the past may help in the understanding of diseases in modern veterinary medicine. Differential diagnosis was made a point of emphasis and discussion, so that this work could have practical significance for paleopathology and veterinary medicine.

Morphometric Changes in Polish Konik Mares After Nearly a Hundred Years of the Breed's Existence.

The study was carried out on 126 mares of the Polish Konik horse breed. Mares were bred under a stable system housing and they came from five leading conservation breeding centres. The mares were divided into three age groups: 3–5 years old, 6–9 years old and over 10 years old. Each animal was characterized using 40 morphometric measurements. Discriminant analysis proved the exterior differences of mares in terms of the analysed metric values. It was concluded that the morphotype of modern Polish Konik mares is statistically significantly influenced by the following traits: neck ventral length, forearm circumference, distance between the vascular notch (incisura vasorum facialium) and the oral angle (angulus oris), distance between the margo coronalis ungulae and the margo solearis ungulae of the thoracic limb, thorax circumference and pelvis width. Conformation traits of the studied Polish Konik mares show multidirectional changes, prevailingly an upward trend in the mean values. However, shoulder height turned out to be definitely the least modified trait. Results obtained in the research presented herein may be a confirmation of progressing exterior transformations, which have been identified in the new generation, namely in the youngest group of mares of this breed.

Infrared Thermographic Assessment of Cooling Effectiveness in Selected Dental Implant Systems

The excessive temperature fluctuations during dental implant site preparation may affect the process of bone-implant osseointegration. In the presented studies, we aimed to assess the quality of cooling during the use of 3 different dental implant systems (BEGO®, NEO BIOTECH®, and BIOMET 3i®). The swine rib was chosen as a study model. The preparation of dental implant site was performed with the use of 3 different speeds of rotation (800, 1,200, and 1,500 rpm) and three types of cooling: with saline solution at room temperature, with saline solution cooled down to 3°C, and without cooling. A statistically significant difference in temperature fluctuations was observed between BEGO and NEO BIOTECH dental systems when cooling with saline solution at 3°C was used (22.3°C versus 21.8°C). In case of all three evaluated dental implant systems, the highest temperature fluctuations occurred when pilot drills were used for implant site preparation. The critical temperature, defined in the available literature, was exceeded only in case of pilot drills (of all 3 systems) used at rotation speed of 1,500 rpm without cooling.

The Effect of File Size and Type and Irrigation Solutions on the Accuracy of Electronic Apex Locators: An In Vitro Study on Canine Teeth

Measurements of the root canal during endodontic treatment have a significant influence on the course of the therapeutic process as well as on its final result in both human and veterinary medicine. The apical constriction should be the termination point for the preparation and filling of the root canal. This research was conducted with the use of a Septodont kit consisting of a small chamber filled with the examined solution in which a healthy second incisor was placed. The step back method was applied for the root canal preparation and master apical file of 30 was used. The working length was 22 mm. The examination was conducted with the use of steel as well as nickel titanium hand instruments. Different irrigation solutions and two types of apex locators were used. Measurements of the working length of the root canal showed dependence on the size of the instrument. Examinations carried out in various environments showed that analogical measurements were obtained only for sodium hypochlorite solutions. In other environments the measured sections were shortened. Comparative examinations with the use of steel instruments demonstrated insignificant measurement differences. Compared to these results, the measurements in nickel titanium group were characterized by more considerable deviations.

The shoulder height estimation in dogs based on the internal dimension of cranial cavity using mathematical formula.

The investigations were carried out on 91 dogs of various breeds. Using the mathematical formula Hestmd = 1.016 ×D − 31.2 (Hestmd, estimated value of the shoulder height; D, internal dimension of the cranial cavity Ethmoideum‐Basion) the shoulder height was calculated. Evaluated results were compared with the shoulder height values measured by authors and coming from papers. The results proved the high accuracy of the implemented mathematical formula.