Aleksander Shkurenko

A Fine-Tuned Fluorinated MOF Addresses the Needs for Trace CO2 Removal and Air Capture Using Physisorption

The development of functional solid-state materials for carbon capture at low carbon dioxide (CO2) concentrations, namely, from confined spaces (<0.5%) and in particular from air (400 ppm), is of prime importance with respect to energy and environment sustainability. Herein, we report the deliberate construction of a hydrolytically stable fluorinated metal-organic framework (MOF), NbOFFIVE-1-Ni, with the appropriate pore system (size, shape, and functionality), ideal for the effective and energy-efficient removal of trace carbon dioxide. Markedly, the CO2-selective NbOFFIVE-1-Ni exhibits the highest CO2 gravimetric and volumetric uptake (ca. 1.3 mmol/g and 51.4 cm(3) (STP) cm(-3)) for a physical adsorbent at 400 ppm of CO2 and 298 K. Practically, NbOFFIVE-1-Ni offers the complete CO2 desorption at 328 K under vacuum with an associated moderate energy input of 54 kJ/mol, typical for the full CO2 desorption in conventional physical adsorbents but considerably lower than chemical sorbents. Noticeably, the contracted square-like channels, affording the close proximity of the fluorine centers, permitted the enhancement of the CO2-framework interactions and subsequently the attainment of an unprecedented CO2 selectivity at very low CO2 concentrations. The precise localization of the adsorbed CO2 at the vicinity of the periodically aligned fluorine centers, promoting the selective adsorption of CO2, is evidenced by the single-crystal X-ray diffraction study on NbOFFIVE-1-Ni hosting CO2 molecules. Cyclic CO2/N2 mixed-gas column breakthrough experiments under dry and humid conditions corroborate the excellent CO2 selectivity under practical carbon capture conditions. Pertinently, the notable hydrolytic stability positions NbOFFIVE-1-Ni as the new benchmark adsorbent for direct air capture and CO2 removal from confined spaces.

Hydrolytically stable fluorinated metal-organic frameworks for energy-efficient dehydration

Drying natural gas efficiently Natural gas must be purified before it can be transported. The preparation process also includes a drying step to remove water. Microporous adsorbents such as zeolites are used for this purpose, but they often need to be heated to temperatures up to 250°C to remove the water so that they can be reused. Cadiau et al. describe a fluorinated metal-organic framework containing nickel metal centers that can remove water from gas streams but that can be regenerated by heating to only 105°C. Science, this issue p. 731 A microporous material preferentially adsorbs water over the other components in natural gas and can release it at 105°C. Natural gas must be dehydrated before it can be transported and used, but conventional drying agents such as activated alumina or inorganic molecular sieves require an energy-intensive desiccant-regeneration step. We report a hydrolytically stable fluorinated metal-organic framework, AlFFIVE-1-Ni (KAUST-8), with a periodic array of open metal coordination sites and fluorine moieties within the contracted square-shaped one-dimensional channel. This material selectively removed water vapor from gas streams containing CO2, N2, CH4, and higher hydrocarbons typical of natural gas, as well as selectively removed both H2O and CO2 in N2-containing streams. The complete desorption of the adsorbed water molecules contained by the AlFFIVE-1-Ni sorbent requires relatively moderate temperature (~105°C) and about half the energy input for commonly used desiccants.

A Fine-Tuned Metal–Organic Framework for Autonomous Indoor Moisture Control

Conventional adsorbents, namely zeolites and silica gel, are often used to control humidity by adsorbing water; however, adsorbents capable of the dual functionality of humidification and dehumidification, offering the desired control of the moisture level at room temperature, have yet to be explored. Here we report Y-shp-MOF-5, a hybrid microporous highly connected rare-earth-based metal-organic framework (MOF), with dual functionality for moisture control within the recommended range of relative humidity (45%-65% RH) set by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). Y-shp-MOF-5 exhibits exceptional structural integrity, robustness, and unique humidity-control performance, as confirmed by the large number (thousand) of conducted water vapor adsorption-desorption cycles. The retained structural integrity and the mechanism of water sorption were corroborated using in situ single-crystal X-ray diffraction (SCXRD) studies. The resultant working water uptake of 0.45 g·g-1 is solely regulated by a simple adjustment of the relative humidity, positioning this hydrolytically stable MOF as a prospective adsorbent for humidity control in confined spaces, such as space shuttles, aircraft cabins, and air-conditioned buildings.

Doping-Induced Anisotropic Self-Assembly of Silver Icosahedra in [Pt2Ag23Cl7(PPh3)10] Nanoclusters

Atomically precise self-assembled architectures of noble metals with unique surface structures are necessary for prospective applications. However, the synthesis of such structures based on silver is challenging because of their instability. In this work, by developing a selective and controlled doping strategy, we synthesized and characterized a rod-shaped, charge-neutral, diplatinum-doped Ag nanocluster (NC) of [Pt2Ag23Cl7(PPh3)10]. Its crystal structure revealed the self-assembly of two Pt-centered Ag icosahedra through vertex sharing. Five bridging and two terminal chlorides and 10 PPh3 ligands were found to stabilize the cluster. Electronic structure simulations corroborated structural and optical characterization of the cluster and provided insights into the effect of the Pt dopants on the optical properties and stability of the cluster. Our study will open new avenues for designing novel self-assembled NCs using different elemental dopants.

Metal–organic frameworks to satisfy gas upgrading demands: fine-tuning the soc-MOF platform for the operative removal of H2S

A cooperative experimental/modeling strategy was used to unveil the structure/gas separation performance relationship for a series of isostructural metal–organic frameworks (MOFs) with soc-topology (square-octahedral) hosting different extra-framework counter ions (NO3−, Cl− and Br−). In3+-, Fe3+-, Ga3+- and the newly isolated Al(III)-based isostructural soc-MOF were extensively studied and evaluated for the separation-based production of high-quality fuels (i.e., CH4, C3H8 and n-C4H10) and olefins. The structural/chemical fine-tuning of the soc-MOF platform promoted equilibrium-based selectivity toward C2+ (C2H6, C2H4, C3H6 C3H8 and n-C4H10) and conferred the desired chemical stability toward H2S. The noted dual chemical stability and gas/vapor selectivity, which have rarely been reported for equilibrium-based separation agents, are essential for the production of high-purity H2, CH4 and C2+ fractions in high yields. Interestingly, the evaluated soc-MOF analogues exhibited high selectivity for C2H4, C3H6 and n-C4H10. In particular, the Fe, Ga and Al analogues presented relatively enhanced C2+/CH4 adsorption selectivities. Notably, the Ga and Al analogues were found to be technically preferable because their structural integrities and separation performances were maintained upon exposure to H2S, indicating that these materials are highly tolerant to H2S. Therefore, the Ga-soc-MOF was further examined for the selective adsorption of H2S in the presence of CO2- and CH4-containing streams, such as refinery-off gases (ROG) and natural gas (NG). Grand canonical Monte Carlo (GCMC) simulations based on a specific force field describing the interactions between the guest molecules and the Ga sites supported and confirmed the considerably higher affinity of the Ga-soc-MOF for C2+ (as exemplified by n-C4H10) than for CH4. The careful selection of an appropriate metal for the trinuclear inorganic molecular building block (MBB), i.e., a Ga metal center, imbues the soc-MOF platform with the requisite hydrolytic stability, H2S stability, and exceptional gas selectivity for ROG and NG upgrading. Finally, the soc-MOF was deployed as a continuous film on a porous support, and its gas permeation properties as a membrane were evaluated.

Applying the Power of Reticular Chemistry to Finding the Missing alb-MOF Platform Based on the (6,12)-Coordinated Edge-Transitive Net

Highly connected and edge-transitive nets are of prime importance in crystal chemistry and are regarded as ideal blueprints for the rational design and construction of metal-organic frameworks (MOFs). We report the design and synthesis of highly connected MOFs based on reticulation of the sole two edge-transitive nets with a vertex figure as double six-membered-ring (d6R) building unit, namely the (4,12)-coordinated shp net (square and hexagonal-prism) and the (6,12)-coordinated alb net (aluminum diboride, hexagonal-prism and trigonal-prism). Decidedly, the combination of our recently isolated 12-connected (12-c) rare-earth (RE) nonanuclear [RE9(μ3-OH)12(μ3-O)2(O2C-)12] carboxylate-based cluster, points of extension matching the 12 vertices of hexagonal-prism d6R, with 4-connected (4-c) square porphyrinic tetracarboxylate ligand led to the formation of the targeted RE-shp-MOF. This is the first time that RE-MOFs based on 12-c molecular building blocks (MBBs), d6R building units, have been deliberately targeted and successfully isolated, paving the way for the long-awaited (6,12)-c MOF with alb topology. Indeed, combination of a custom-designed hexacarboxylate ligand with RE salts led to the formation of the first related alb-MOF, RE-alb-MOF. Intuitively, we successfully transplanted the alb topology to another chemical system and constructed the first indium-based alb-MOF, In-alb-MOF, by employing trinuclear [In3(μ3-O)(O2C-)6] as the requisite 6-connected trigonal-prism and purposely made a dodecacarboxylate ligand as a compatible 12-c MBB. Prominently, the dodecacarboxylate ligand was employed to transplant shp topology into copper-based MOFs by employing the copper paddlewheel [Cu2(O2C-)4] as the complementary square building unit, affording the first Cu-shp-MOF. We revealed that highly connected edge-transitive nets such shp and alb are ideal for topological transplantation and deliberate construction of related MOFs based on minimal edge-transitive nets.

Mechanochemical Encapsulation of Fullerenes in Peptidic Containers Prepared by Dynamic Chiral Self‐Sorting and Self‐Assembly

Molecular capsules composed of amino acid or peptide derivatives connected to resorcin[4]arene scaffolds through acylhydrazone linkers have been synthesized using dynamic covalent chemistry (DCC) and hydrogen-bond-based self-assembly. The dynamic character of the linkers and the preference of the peptides towards self-assembly into β-barrel-type motifs lead to the spontaneous amplification of formation of homochiral capsules from mixtures of different substrates. The capsules have cavities of around 800 Å(3) and exhibit good kinetic stability. Although they retain their dynamic character, which allows processes such as chiral self-sorting and chiral self-assembly to operate with high fidelity, guest complexation is hindered in solution. However, the quantitative complexation of even very large guests, such as fullerene C60 or C70 , is possible through the utilization of reversible covalent bonds or the application of mechanochemical methods. The NMR spectra show the influence of the chiral environment on the symmetry of the fullerene molecules, which results in the differentiation of diastereotopic carbon atoms for C70 , and the X-ray structures provide unique information on the modes of peptide-fullerene interactions.

Highly ordered luminescent calix(4)azacrown films showing an emission response selective to volatile tetrahydrofuran

Sensitive, selective, low-cost, and simply designed detectors for THF among other vapour organic compounds (VOCs) are highly attractive. Self-assembled molecular films with remarkable selective vapoluminescent response to VOC THF were fabricated using drop-casting of calix[4]azacrown-based J-aggregates. The latter, stabilized via C–H⋯π and C–H⋯O hydrogen bond networks, assemble into nanoparticles that exhibit aggregation-induced emission (AIE) effect, which produces violet emission at room temperature in acetonitrile. The films are highly ordered and switch order at high temperature, leading to 2.5-fold luminescence enhancement and responsive behaviour.

CsPb2Br5 Single Crystals: Synthesis and Characterization

CsPb2 Br5 is a ternary halogen-plumbate material with close characteristics to the well-reported halide perovskites. Owing to its unconventional two-dimensional structure, CsPb2 Br5 is being looked at broadly for potential applications in optoelectronics. CsPb2 Br5 investigations are currently limited to nanostructures and powder forms of the material, which present unclear and conflicting optical properties. In this study, we present the synthesis and characterization of CsPb2 Br5 bulk single crystals, which enabled us to finally clarify the materials optical features. Our CsPb2 Br5 crystal has a two-dimensional structure with Pb2 Br5- layers spaced by Cs+ cations, and exhibits approximately 3.1 eV indirect band gap with no emission in the visible spectrum.

Nonclassical dynamics of the methyl group in 1,1,1-triphenylethane. Evidence from powder 1H NMR spectra

According to the damped quantum rotation (DQR) theory, hindered rotation of methyl groups, evidenced in nuclear magnetic resonance (NMR) line shapes, is a nonclassical process. It comprises a number of quantum-rate processes measured by two different quantum-rate constants. The classical jump model employing only one rate constant is reproduced if these quantum constants happen to be equal. The values of their ratio, or the nonclassicallity coefficient, determined hitherto from NMR spectra of single crystals and solutions range from about 1.20 to 1.30 in the latter case to above 5.0 in the former, with the value of 1 corresponding to the jump model. Presently, first systematic investigations of the DQR effects in wide-line NMR spectra of a powder sample are reported. For 1,1,1-triphenylethane deuterated in the aromatic positions, the relevant line-shape effects were monitored in the range 99-121 K. The values of the nonclassicality coefficient dropping from 2.7 to 1.7 were evaluated in line shape fits to the experimental powder spectra from the range 99-108 K. At these temperatures, the fits with the conventional line-shape model are visibly inferior to the DQR fits. Using a theoretical model reported earlier, a semiquantitative interpretation of the DQR parameters evaluated from the spectra is given. It is shown that the DQR effects as such can be detected in wide-line NMR spectra of powdered samples, which are relatively facile to measure. However, a fully quantitative picture of these effects can only be obtained from the much more demanding experiments on single crystals.