Aleksi E. Soini

Three-photon excitation in fluorescence microscopy

We show experiments proving the feasibility of scanning fluorescence microscopy by three-photon excitation. Three-photon excitation fluorescence axial images are shown of polystyrene beads stained with the fluorophore 2,5-bis(4-biphenyl)oxazole (BBO). Three-photon excitation is performed at an excitation wavelength of 900 nm and with pulses of 130 fs duration provided by a mode-locked titanium sapphire laser. Fluorescence is collected between 350 and 450 nm. The fluorescence image signal features a third-order dependence on the excitation power, also providing intrinsic 3-D imaging. The resolution of a three-photon excitation microscope is increased over that of a comparable two-photon excitation microscope.

Fluorescence-Based Cell Viability Screening Assays Using Water-Soluble Oxygen Probes

A simple luminescence-based assay for screening the viability of mammalian cells is described, based on the monitoring of cell respiration by means of a phosphorescent water-soluble oxygen probe that responds to changes in the concentration of dissolved oxygen by changing its emission intensity and lifetime. The probe was added at low concentrations (0.3 μM to 0.5 nM) to each sample containing a culture of cells in the wells of a standard 96-well plate. Analysis of oxygen consumption was initiated by applying a layer of mineral oil on top of each sample followed by monitoring of the phosphorescent signal on a prompt or time-resolved fluorescence plate reader. Rates of oxygen uptake could be determined on the basis of kinetic changes of the phosphorescence (initial slopes) and correlated with cell numbers (105 to 107 cells/mL for FL5.12 lymphoblastic cell line), cell viability, or drug/effector action using appropriate control samples. The assay is cell noninvasive, more simple, robust, and cost-effective than existing microplate-based cell viability assays; is compatible with existing instrumentation; and allows for high-throughput analysis of cell viability. (Journal of Biomolecular Screening 2003:264-272)

A new microvolume technique for bioaffinity assays using two-photon excitation

Bioaffinity binding assays such as the immunoassay are widely used in life science research. In an immunoassay, specific antibodies are used to bind target molecules in the sample, and quantification of the binding reaction reveals the amount of the target molecules. Here we present a method to measure bioaffinity assays using the two-photon excitation of fluorescence. In this method, microparticles are used as solid phase in binding the target molecules. The degree of binding is then quantified from individual microparticles by use of two photon excitation of fluorescence. We demonstrated the effectiveness of the method using the human α-fetoprotein (AFP) immunoassay, which is used to detect fetal disorders. The sensitivity and dynamic range we obtained with this assay indicate that this method can provide a cost-effective and simple way to measure various biomolecules in solution for research and clinical applications.

Hydrophilic Labeling Reagents of Dipyrrylmethene-BF2 Dyes for Two-Photon Excited Fluorometry: Syntheses and Photophysical Characterization

Recently introduced bioaffinity assay technology, ArcDia™ TPX, is based on two-photon excited fluorescence (TPE) and it enables separation-free ultra-sensitive immunoassays from microvolumes. Here we present syntheses of novel two-photon excitable fluorescent labeling reagents which have been specially designed to be used as label molecules in the ArcDia™ TPX assay technique. The labeling reagents are based on dipyrrylmetheneboron difluoride (dipyrrylmethene-BF2) chromophore, which have been substituted with aryl, heteroaryl or arylalkenyl chemical groups to extend the π-electron conjugation. These substitutions results in a series of dipyrrylmethene-BF2 fluorophores with different photophysical properties. Dipyrrylmethene-BF2 fluorophores have been further substituted with a dipeptide linker unit and finally activated as succinimidyl esters to enable specific coupling with primary amino groups. The dipeptide linker serves as a spacer arm between the label and a target, and enhances the solubility of the label in aqueous solutions. Study of the chemical and photophysical performance of the new labeling reagents is described. The new labeling reagents exhibit high fluorescence quantum yields, and molar absorption coefficients. The results show that the new labels with the hydrophilic dipeptide linker unit provide large two-photon excitation cross-sections, high fluorescence quantum efficiency and good solubility in aqueous solutions. The results suggest that the novel dipyrrylmethene-BF2 labels are highly applicable to bioaffinity assays based on two-photon excitation of fluorescence.

Rapid Method for Detection of Influenza A and B Virus Antigens by Use of a Two-Photon Excitation Assay Technique and Dry-Chemistry Reagents

ABSTRACT New separation-free assay methods for the rapid detection of influenza A and B virus antigens are presented. The methods employ dry-chemistry reagents and the recently developed two-photon excitation (TPX) fluorescence detection technology. According to the assay scheme, virus antigens are sandwiched by capture antibody onto polymer microspheres and fluorescently labeled antibody conjugate. Consequently, fluorescent immunocomplexes are formed on the surface of microspheres in proportion to the concentration of the analyte in the sample. The fluorescence signal from individual microspheres is measured, separation free, by means of two-photon excited fluorescence detection. In order to demonstrate the applicability of the new assay technique for virus antigen detection, methods for influenza A and B viruses were constructed. The assay method for influenza A virus applied a molecular fluorescent label, whereas the method for influenza B virus required a nanoparticle fluorescent reporter to reach sufficient clinical sensitivity. The new methods utilize a dry-chemistry approach, where all assay-specific reagents are dispensed into assay wells already in the manufacturing process of the test kits. The performance of the assay methods was tested with nasopharyngeal specimens using a time-resolved fluoroimmunoassay as a reference method. The results suggest that the new technique enables the rapid detection of influenza virus antigens with sensitivity and specificity comparable to that of the reference method. The dose-response curves showed linear responses with slopes equal to unity and dynamic assay ranges of 3 orders of magnitude. Applicability of the novel TPX technique for rapid multianalyte testing of respiratory infections is discussed.

Syntheses of Novel Dipyrrylmethene-BF2 Dyes and Their Performance as Labels in Two-Photon Excited Fluoroimmunoassay

Two-photon excitation of fluorescence (TPE) has been found a powerful tool in the field of microscopy imaging and recently also in the field of bioanalytics. The recently introduced bioaffinity assay technology, ArcDia™ TPX, enables separation-free ultra-sensitive immunoassays from microvolumes. This assay technique is based on the use of microspheres as a solid reaction carriers and two-photon excited fluorescence detection. In the ArcDia™ TPX-technology, the individual microparticles are observed and the number of bound biomolecules on the microparticle surface is quantified by two-photon excited fluorescence. Here we present synthesis and use of a novel dipyrrylmethene-BF2 fluorophore that has been designed to be used as label in ArcDia™ TPX assay technique. The absorption and emission wavelengths of the label are tuned to allow excitation with a 1064 nm microchip laser. The label contains two-carboxylic residues, one of which is activated as N-hydroxysuccinimide ester to enable labeling of amino residues of biomolecules. The other carboxylic group is in free form to increase solubility in aqueous solutions. This new fluorescent label is tested in a separation-free immunoassay using ArcDia™ TPX assay technique. The performance of the new label is compared to that of one of the brightest fluorophores available, R-phycoerythrin (RPE). According to the results, the dipyrrylmethene-BF2 label provides significantly better signal-to-background ratio, leading to higher assay sensitivity and broader dynamic range compared to that of RPE. Good solubility to aqueous solutions and high fluorescence quantum efficiency, suggests the dipyrrylmethene-BF2 label is applicable also in other fluorescence-based applications.

Dipyrrylmetheneboron difluorides as labels in two-photon excited fluorometry. Part I--Immunometric assays.

Seven different two-photon excitable dipyrrylmetheneboron difluoride labels (dipyrrylmethene-BF2 labels) and a frequently used TAMRA label were conjugated to mouse IgG against α-fetoprotein in variable substitution degrees. Altogether 40 IgG conjugates were prepared, and studied with respect to one-photon absorption and emission properties, and two-photon fluorescence efficiency using 1064 nm laser as illumination source. Performance of the IgG conjugates as tracers in a separation-free immunometric assay of α-fetoprotein was evaluated using two-photon excitation assay technology, ArcDiaTM TPX. The results show that the dipyrrylmethene-BF2 labels provide subpicomolar sensitivity, which is an order of magnitude better than that of TAMRA label. The effect of chromophore structure and substitution degree of IgG-label conjugates on the assay performance is discussed.

Evaluation of the phosphorescent palladium(II)–coproporphyrin labels in separation-free hybridization assays ☆

Palladium(II)-coproporphyrin label and a set of corresponding monofunctional labeling reagents with different linker arms were evaluated for labeling of oligonucleotides and subsequent use in hybridization assays. The properties of resulting oligonucleotide probes including phosphorescence spectra, quantum yields, lifetimes, and labeling yields were examined as functions of the label and oligonucleotide structures. Upon hybridization with complementary sequences bearing dabcyl, QSY-7, and rhodamine green dyes, the probes displayed strong quenching due to close proximity effects. Intensity and lifetime changes of the phosphorescence, distance, and temperature dependences were investigated in detail. The potential of the new label and probes for sensitive and separation-free hybridization assays was discussed.

A lab-on-a-chip compatible bioaffinity assay method for human α-fetoprotein

A new lab-on-a-chip compatible binding assay platform is introduced. The platform combines dry-chemistry bioaffinity reagents and the recently introduced ArcDia TPX™ binding assay technique. The technique employs polymer microspheres as a solid phase reaction carrier, fluorescently labeled antibody conjugates, and detection of fluorescence emission from the surface of individual microspheres by two-photon excitation fluorescence. Signal response of the technique is independent of the reaction volume, thus the technique is particularly well suited for detection of bioaffinity reactions from miniature volumes. Performance of the new assay platform is studied by means of an immunometric assay of human α-fetoprotein (hAFP) in 384-plate format, and the results are compared to those of a corresponding wet-chemistry assay method. The results show that the ArcDia TPX™ detection technique can be combined with dry-chemistry reagents without compromises in assay performance. The microchip field has so far been characterized with a lack of microchip-compatible detection platforms which would allow cost-effective microchip design and sensitive bioaffinity detection. The presented detection technique is expected to provide a solution for this shortage.

Dipyrrylmetheneboron difluorides as labels in two-photon excited fluorometry. Part II--Nucleic acid hybridization assays.

Five two-photon excitable dipyrrylmetheneboron difluoride labels (dipyrrylmethene-BF2 labels) with fluorescence emission maximum between 530 and 590 nm, and a frequently used rhodamine label, TAMRA, were conjugated to aminomodified oligonucleotides. The performance of the labeled oligonucleotides was studied in a separation-free nucleic acid hybridization assay using ArcDia™ TPX bioaffinity assay technology. The results show that oligonucleotide conjugates of dipyrrylmethene-BF2 labels provide higher two-photon excited fluorescence yield and better assay sensitivity than corresponding TAMRA conjugate. The effect of conjugation on photophysical properties of the labels and performance of the labeled oligonucleotides in separation-free hybridization assay is discussed.