Alessandro Della Corte

Synthesis of Fibrous Complex Structures: Designing Microstructure to Deliver Targeted Macroscale Response

In Mechanics, material properties are most often regarded as being given, and based on this, many technical solutions are usually conceived and constructed. However, nowadays manufacturing processes have advanced to the point that metamaterials having selected properties can be designed and fabricated. Three-dimensional printing, electrospinning, self-assembly, and many other advanced manufacturing techniques are raising a number of scientific questions which must be addressed if the potential of these new technologies is to be fully realized. In this work, we report on the status of modeling and analysis of metamaterials exhibiting a rich and varied macroscopic response conferred by complex microstructures and particularly focus on strongly interacting inextensible or nearly inextensible fibers. The principal aim is to furnish a framework in which the mechanics of 3D rapid prototyping of microstructured lattices and fabrics can be clearly understood and exploited. Moreover, several-related open questions will be identified and discussed, and some methodological considerations of general interest are provided.

Higher-gradient continua: The legacy of Piola, Mindlin, Sedov and Toupin and some future research perspectives

Since the first studies dedicated to the mechanics of deformable bodies (by Euler, D’Alembert, Lagrange) the principle of virtual work (or virtual velocities) has been used to provide firm guidance to the formulation of novel theories. Gabrio Piola dedicated his scientific life to formulating a continuum theory in order to encompass a large class of deformation phenomena and was the first author to consider continua with non-local internal interactions and, as a particular case, higher-gradient continua. More recent followers of Piola (Mindlin, Sedov and then Richard Toupin) recognized the principle of virtual work (and its particular case, the principle of least action) as the (only!) firm foundation of continuum mechanics. Mindlin and Toupin managed to formulate a conceptual frame for continuum mechanics which is able to effectively model the complex behaviour of so-called architectured, advanced, multiscale or microstructured (meta)materials. Other postulation schemes, in contrast, do not seem able to be equally efficient. The present work aims to provide a historical and theoretical overview of the subject. Some research perspectives concerning this theoretical approach are outlined in the final section.

Piezo-electromechanical smart materials with distributed arrays of piezoelectric transducers: Current and upcoming applications

This review paper intends to gather and organize a series of works which discuss the possibility of exploiting the mechanical properties of distributed arrays of piezoelectric transducers. The concept can be described as follows: on every struc- tural member one can uniformly distribute an array of piezoelectric transducers whose electric terminals are to be connected to a suitably optimized electric waveguide. If the aim of such a modification is identified to be the suppression of mechanical vibrations then the optimal electric waveguide is identified to be the ‘electric analog’ of the considered structural member. The obtained electromechanical systems were called PEM (PiezoElectroMechanical) structures. The authors especially focus on the role played by Lagrange methods in the design of these analog circuits and in the study of PEM structures and we suggest some possible research developments in the conception of new devices, in their study and in their technological application. Other potential uses of PEMs, such as Structural Health Monitoring and Energy Harvesting, are described as well. PEM structures can be regarded as a particular kind of smart materials, i.e. materials especially designed and engineered to show a specific and well-defined response to external excitations: for this reason, the authors try to find connection between PEM beams and plates and some micromorphic materials whose properties as carriers of waves have been studied recently. Finally, this paper aims to establish some links among some concepts which are used in different cultural groups, as smart structure, metamaterial and functional structural modifications, showing how appropriate would be to avoid the use of different names for similar concepts.

Interfaces in micromorphic materials: Wave transmission and reflection with numerical simulations

Reflection and transmission of elastic waves at the interface between two distinct micromorphic media are considered in the one-dimensional setting. A dual internal variable approach is used for the description of the microstructure influence on the global motion. It is shown that reflection and transition coefficients for plane waves depend on the coupling between macro- and micro-motions as well as on the choice of the microstructural interaction at the interface. Numerical simulations exhibiting results with promising technological implications are shown.

Euromech 563 Cisterna di Latina 17–21 March 2014 Generalized continua and their applications to the design of composites and metamaterials: A review of presentations and discussions

In the present paper, a rational report on Euromech 563, Generalized continua and their applications to the design of composites and metamaterials (Cisterna di Latina 17–21 March 2014), is provided. The frank and constructive spirit which animated the workshop by Dell’Isola et al. (ZAMM 2014; 94(5): 367–372) also characterized Euromech Colloquium 563. All presentations were video-recorded and are freely available online at the address http://www.memocsevents.eu/euromech563/?page_id=1013. The topics treated were selected by the organizers in order to allow a comparison of the available experimental evidence with the predictive capability of current theoretical models. The numerical investigations selected and presented aimed to make more effective the aforementioned comparison. The interested reader will find more details about the colloquium at the dedicated webpage http://www.memocsevents.eu/euromech563. The design and use of advanced materials and structural elements requires an extensive and rigorous process of mathematical modeling. The organizers of Euromech 563, being aware of this need, have chosen as participants renowned and reputed scientists (and some promising young researchers) who all agree on recognizing to mathematical sciences their role of unifying and coordinating tool in the effort for the advance of technology. The Colloquium has indeed surely contributed to the development of more advanced technological possibilities and to the theoretical conception of completely new ones.

The influence of different geometries of matrix/scaffold on the remodeling process of a bone and bioresorbable material mixture with voids

Since internal architecture greatly influences crucial factors for tissue regeneration, such as nutrient diffusion, cell adhesion and matrix deposition, scaffolds have to be carefully designed, keeping in mind case-specific mechanical, mass transport and biological requirements. However, customizing scaffold architecture to better suit conflicting requirements, such as biological and mechanical ones, remains a challenging issue. Recent advances in printing technologies, together with the synthesis of novel composite biomaterials, have enabled the fabrication of various scaffolds with defined shape and controlled in vitro behavior. Thus, the influence of different geometries of the assemblage of the matrix and scaffold on the remodeling processes of living bone and artificial material should be investigated. To this end, two implant shapes are considered in this paper, namely a circular inclusion and a rectangular groove of different aspect ratios. A model of a mixture of bone tissue and bioresorbable material with voids was used to numerically analyze the physiological balance between the processes of bone growth and resorption and artificial material resorption in a plate-like sample. The adopted model was derived from a theory for the behavior of porous solids in which the matrix material is elastic and the interstices are void of material.

Some Cases of Unrecognized Transmission of Scientific Knowledge: From Antiquity to Gabrio Piola’s Peridynamics and Generalized Continuum Theories

The aim of this paper is to show some typical mechanisms in the transmission of scientific knowledge through the study of some examples. We will start by considering some ancient examples concerning Democritus, Heron, Galileo and the history of the theory of tides. Then we will mainly focus on the works of the Italian scientist Gabrio Piola (1794–1850). In particular: 1. we show clear similarities between Noll’s postulation of mechanics and the ‘ancient’ presentation by Piola of the ideas needed to found Analytical Continuum Mechanics; 2. we prove that non-local and higher gradient continuum mechanics were conceived (and clearly formulated) already in Piola’s works; 3. we explain the reasons of the unfortunate circumstances which caused the (temporary) erasure of the memory of many among Piola’s contributions to mechanical sciences. Moreover, we discuss how the theory which has recently been called peridynamics, i.e. a mechanical theory which assumes that the force applied on a material particle of a continuum depends on the deformation state of a neighbourhood of the particle, was first formulated in Piola’s works. In this way we argue that in the passage from one a cultural tradition to another the content of scientific texts may often be lost, and it is possible to find more recent sources which are scientifically more primitive than some more ancient ones.

Equilibria of a clamped Euler beam (Elastica) with distributed load: Large deformations

We present some novel equilibrium shapes of a clamped Euler beam (Elastica from now on) under uniformly distributed dead load orthogonal to the straight reference configuration. We characterize the properties of the minimizers of total energy, determine the corresponding Euler-Lagrange conditions and prove, by means of direct methods of calculus of variations, the existence of curled local minimizers. Moreover, we prove some sufficient conditions for stability and instability of particular solutions of the Euler-Lagrange conditions that can be applied to numerically found curled shapes.

A model for elastic flexoelectric materials including strain gradient effects

A constitutive model for elastic flexoelectric materials under small deformation based on second gradient continuum theory is developed, using a Toupin-like variational formulation to simultaneously obtain constitutive relations, balance equations and boundary conditions. The model includes three different electromechanical “stresses”: a higher-order stress, an extended local electric force and a generalized Cauchy stress tensor. The constitutive equations of the model are obtained by postulating an internal energy density function which depends on both the strain and its gradient as well as the polarization. Finally, as an application of the model, we derive the explicit analytical expressions of the polarization and displacement vector fields for the problem of the polarization induced over a thin spherical shell subjected to hydrostatic loading conditions.

Modeling Deformable Bodies Using Discrete Systems with Centroid-Based Propagating Interaction: Fracture and Crack Evolution

We use a simple discrete system in order to model deformation and fracture within the same theoretical and numerical framework. The model displays a rich behavior, accounting for different fracture phenomena, and in particular for crack formation and growth. A comparison with standard Finite Element simulations and with the basic Griffith theory of fracture is provided. Moreover, an ‘almost steady’ state, i.e. a long apparent equilibrium followed by an abrupt crack growth, is obtained by suitably parameterizing the system. The model can be easily generalized to higher order interactions corresponding, in the homogenized limit, to higher gradient continuum theories.