Alessandro Marrucci

Interpretation of coastal sediment quality based on trace metal and PAH analysis, benthic foraminifera, and toxicity tests (Sardinia, Western Mediterranean)

An integrated approach for the assessment of coastal sediment quality was utilised in three areas of Sardinia (Western Mediterranean, Italy). Sediments were analysed for trace metals and polycyclic aromatic hydrocarbons (PAHs), while benthic foraminifera were used as bioindicators. Furthermore, the embryo-toxicity test was used to provide ecologically relevant information using rapid and cost-effective screening tools. The aim was to evaluate the usefulness of coupling different analytical tools. The results revealed the presence of polluted sediments in areas exposed to petrochemical industries, smelters or military settlements. However, while foraminifera have presented similar indications for chemical analysis of contamination levels in the different areas, the toxicity test exhibited a poor relationship with the contaminants measured individually. The results raise questions concerning the bioavailability of contaminants released by sediments in the water column. Overall, the toxicity rate was significant in many samples in comparison with other sites studied in other Mediterranean regions.

Using SPMDs to monitor the seawater concentrations of PAHs and PCBs in marine protected areas (Western Mediterranean)

Aqueous concentrations of individual polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) were determined in coastal sites of two marine protected areas (MPAs), that is, Asinara and the La Maddalena Archipelago, in Sardinia (Western Mediterranean Sea). The use of semi-permeable membrane devices (SPMDs) enabled the detection of dissolved PAHs and PCBs, even in very low concentrations of (pgL(-1)), in seawater. The results reveal significant differences between the two sampling areas relative to the concentration of the individual PAHs, which provide information concerning the pollution sources affecting relatively pristine environments. The PCBs were generally observed at levels below the detection limits of the utilised method.

Heavy metal accumulation in surface sediments at the port of Cagliari (Sardinia, western Mediterranean): Environmental assessment using sequential extractions and benthic foraminifera

Superficial sediments were taken at the port of Cagliari (Sardinia, Italy), which includes the oil terminal of one of the largest oil refineries in the Mediterranean. Significant trace metal concentrations were found in the whole port area. Sequential extraction of metals from the different sediment fractions (BCR method) showed a higher risk of remobilisation for Cd, which is mostly bound to the exchangeable fraction. Foraminiferal density and richness of species were variable across the study area. The living assemblages were characterized by low diversity in samples collected close to the port areas. Ammonia tepida and bolivinids, which were positively correlated with concentrations of heavy metals and organic matter content, appeared to show tolerance to the environmental disturbance. The sampling sites characterized by the highest values of biotic indices were located far from the port areas and present an epiphytic and epifaunal biocoenosis.

Passive Sampling Technologies for the Monitoring of Organic and Inorganic Contaminants in Seawater

Until now, water quality monitoring has relied on spot sampling followed by instrumental analytical measurements to determine pollutant concentrations. Despite a number of advantages, this procedure has considerable limitations in terms of temporal and spatial resolution. The passive sampling techniques, which basically consist of concentrating substances on a submerged device for a given period and analysing accumulated substances, should improve the monitoring practices by simplifying analytical issues (lower detection limits, analysis in a simpler matrix) and allowing time integration of the contamination. The performance and potential applications of passive sampling for water quality monitoring in coastal and marine environments are described.

An ecotoxicological approach to evaluate the effects of tourism impacts in the Marine Protected Area of La Maddalena (Sardinia, Italy)

In the Marine Protected Area of La Maddalena Archipelago, environmental protection rules and safeguard measures for nautical activities have helped in reducing anthropogenic pressure; however, tourism related activities remain particularly significant in summer. With the aim of evaluating their impacts, the biomarker approach using transplanted Mytilus galloprovincialis as sentinel organisms coupled with POCIS deployment was applied. Mussels, translocated to four marine areas differently impacted by tourism activities, were sampled before, during and after the tourist season. Moreover, endocrine disruptors in passive samplers POCIS and the cellular toxicity of whole POCIS extracts on mussel haemocytes were evaluated to integrate ecotoxicological information. Lysosomal biomarkers, condition index and mortality rate, as well as metals in tissues suggested an alteration of the health status of mussels transplanted to the most impacted sites. The cellular toxicity of POCIS extracts was pointed out, notwithstanding the concentrations of the examined compounds were always below the detection limits.

Presence of Trihalomethanes in ready-to-eat vegetables disinfected with chlorine

ABSTRACT Trihalomethanes (THMs) – CHCl3, CHCl2Br, CHClBr2 and CHBr3 – are drinking water disinfection by-products (DBPs). These compounds can also be absorbed by different types of foods, including ready-to-eat (RTE) fresh vegetables. The potential absorption of THMs during washing of RTE vegetables could pose a potential risk to consumers’ health. The concentration of THMs in the water used in the manufacturing process of these products shall not exceed the limit of 100 or 80 µgL−1 according to European Union (EU) and United States legislation, respectively. By contrast, there is little information about the presence of such compounds in the final product. This study evaluated the concentration of THMs in different types of RTE vegetables (carrots, iceberg lettuce, lettuce, mixed salad, parsley, parsley and garlic, rocket salad, valerian) after washing with chlorinated water. In the 115 samples analysed, the average value of total THMs was equal to 76.7 ng g−1. Chloroform was the THM present in the largest percentage in all the RTE vegetables. These results show that the process of washing RTE vegetables should be optimised in order to reduce the risk for consumers associated with the presence of DBPs.

Arsenic speciation in marine sediments: A comparison between two sequential extraction procedures

ABSTRACT Arsenic distribution and mobility in marine sediments was investigated by means of total extraction and two sequential extraction procedures i.e. a modified sequential extraction procedure proposed by the European Standard, Measurementand Testing (SM&T) program, formerly the Community Bureau of Reference (BCR) procedure and a five steps sequential extraction based on the Wenzel extraction procedure, called modified Wenzel extraction. Sediments were collected from Cagliari’s harbour and Cagliari’s gulf, in Western Mediterranean Sea, Italy. The modified Wenzel extraction provided a more detailed As binding pattern and turned out to be much more appropriate than the modified SM&T procedure for gaining information regarding the mobilization of As within marine sediments. In the harbour, the largest part of As is contained in the residual fraction. At the contrary, As concentration, which is higher in the Cagliari’s gulf, is primarily associated with amorphous and crystalline hydrous Fe(Mn, Al) oxide. Moreover, this study suggests the possibility to segregate different types of marine sediments depending of human or industrial activities and to trace As contaminated marine sediments to determine the origin of contamination following the percentile of As contained in each extraction steps.