Alex Papadakis

Small SRS photon field profile dosimetry performed using a PinPoint air ion chamber, a diamond detector, a novel silicon-diode array "DOSI…, and polymer gel dosimetry. Analysis and intercomparison

Small photon fields are increasingly used in modern radiotherapy and especially in IMRT and SRS/SRT treatments. The uncertainties related to small field profile measurements can introduce significant systematic errors to the overall treatment process. These measurements are challenging mainly due to the absence of charged particle equilibrium conditions, detector size and composition effects, and positioning problems. In this work four different dosimetric methods have been used to measure the profiles of three small 6 MV circular fields having diameters of 7.5, 15.0, and 30.0 mm: a small sensitive volume air ion chamber, a diamond detector, a novel silicon-diode array (DOSI), and vinyl-pyrrolidone based polymer gel dosimeter. The results of this work support the validity of previous findings, suggesting that (a) air ion chambers are not suitable for small field dosimetry since they result in penumbra broadening and require significant corrections due to severe charged particle transport alterations; (b) diamond detectors provide high resolution and rather accurate small field profile measurements, as long as positioning problems can be addressed and the necessary dose rate corrections are correctly applied; and (c) the novel silicon-diode array (DOSI) used in this study seems to be adequate for small field profile measurements overcoming positioning problems. Polymer gel data were assumed as reference data to which the other measurement data were compared both qualitatively and quantitatively using the gamma-index concept. Polymer gels are both phantom and dosimeter, hence there are no beam perturbation effects. In addition, polymer gels are tissue equivalent and can provide high-spatial density and high-spatial resolution measurements without positioning problems, which makes them useful for small field dosimetry measurements. This work emphasizes the need to perform beam profile measurements of small fields (for acceptance, commissioning, treatment planning systems data feed, and periodic quality assurance purposes) using more than one dosimetric method. The authors believe this to be a safe way towards the reduction of the overall uncertainty related to SRS/SRT treatments.

Experimental determination of the effect of detector size on profile measurements in narrow photon beams

The aim of this work is to investigate experimentally the detector size effect on narrow beam profile measurements. Polymer gel and magnetic resonance imaging dosimetry was used for this purpose. Profile measurements (Pm(s)) of a 5 mm diameter 6 MV stereotactic beam were performed using polymer gels. Eight measurements of the profile of this narrow beam were performed using correspondingly eight different detector sizes. This was achieved using high spatial resolution (0.25 mm) two-dimensional measurements and eight different signal integration volumes A X A X slice thickness, simulating detectors of different size. A ranged from 0.25 to 7.5 mm, representing the detector size. The gel-derived profiles exhibited increased penumbra width with increasing detector size, for sizes >0.5 mm. By extrapolating the gel-derived profiles to zero detector size, the true profile (Pt) of the studied beam was derived. The same polymer gel data were also used to simulate a small-volume ion chamber profile measurement of the same beam, in terms of volume averaging. The comparison between these results and actual corresponding small-volume chamber profile measurements performed in this study, reveal that the penumbra broadening caused by both volume averaging and electron transport alterations (present in actual ion chamber profile measurements) is a lot more intense than that resulted by volume averaging effects alone (present in gel-derived profiles simulating ion chamber profile measurements). Therefore, not only the detector size, but also its composition and tissue equivalency is proved to be an important factor for correct narrow beam profile measurements. Additionally, the convolution kernels related to each detector size and to the air ion chamber were calculated using the corresponding profile measurements (Pm(s)), the gel-derived true profile (Pt), and convolution theory. The response kernels of any desired detector can be derived, allowing the elimination of the errors associated with narrow beam profile measurements.

Determination of the weighted CT dose index in modern multi-detector CT scanners

The aim of the present study was to (a) evaluate the underestimation in the value of the free-in-air (CTDI(air)) and the weighted CT dose index (CTDI(w)) determined with the standard 100 mm pencil chamber, i.e. the CTDI(100) concept, for the whole range of nominal radiation beam collimations selectable in a modern multi-slice CT scanner, (b) estimate the optimum length of the pencil-chamber and phantoms for accurate CTDI(w) measurements and (c) provide CTDI(w) values normalized to free-in-air CTDI for different tube-voltage, nominal radiation beam collimations and beam filtration values. The underestimation in the determination of CTDI(air) and CTDI(w) using the CTDI(100) concept was determined from measurements obtained with standard polymethyl-methacrylate (PMMA) phantoms and arrays of thermoluminescence dosimeters. The Monte Carlo N-Particle transport code was used to simulate standard CTDI measurements on a 16-slice CT scanner. The optimum pencil-chamber length for accurate determination of CTDI(w) was estimated as the minimum chamber length for which a further increase in length does not alter the value of the CTDI. CTDI(w)/CTDI(air) ratios were determined using Monte Carlo simulation and the optimum detector length for all selectable tube-voltage values and for three different values of beam filtration. To verify the Monte Carlo results, measured values of CTDI(w)/CTDI(air) ratios using the standard 100 mm pencil ionization chamber were compared with corresponding values calculated with Monte Carlo experiments. The underestimation in the determination of CTDI(air) using the 100 mm pencil chamber was less than 1% for all beam collimations. The underestimation in CTDI(w) was 15% and 27% for head and body phantoms, respectively. The optimum detector length for accurate CTDI(w) measurements was found to be 50 cm for the beam collimations commonly employed in modern multi-detector (MD) CT scanners. The ratio of CTDI(w)/CTDI(air) determined using the optimum detector length was found to be independent of beam collimation. Percentage differences between measured and calculated corresponding CTDI(w)/CTDI(air) ratios were always less than 8% for head and less than 5% for body PMMA phantoms. In conclusion, the CTDI(air) of MDCT scanners may be measured accurately with a 100 mm pencil chamber. However, the CTDI(100) concept was found to be inadequate for accurate CTDI(w) determination for the wide beam collimations commonly used in MDCT scanners. Accurate CTDI(w) determination presupposes the use of a pencil chamber and PMMA phantoms at least 50 cm long.

Adrenal glands in beta-thalassemia major: magnetic resonance (MR) imaging features and correlation with iron stores.

This study aimed at describing the magnetic resonance (MR) imaging features of the adrenal glands in beta-thalassemic patients and at investigating the relation between adrenal and hepatic siderosis. Adrenal signal intensity (SI) was retrospectively assessed on abdominal MR studies of 35 patients with beta-thalassemia major undergoing quantification of hepatic siderosis and 12 healthy controls, using T1- (120/4/90), intermediate - (120/4/20), and T2*- (120/15/20) weighted GRE sequences. Adrenal SI was graded as grade 0 (normal SI on all sequences), grade 1 (hypointensity on T2* alone), or grade 2 (hypointensity on at least T2*). Adrenal size was measured in the thalassemic patients and compared with normative data. Liver-to-muscle (L/M) SI ratios, expressing hepatic siderosis, were estimated on each sequence. Serum ferritin levels were recorded. Adrenal hypointensity (grades 1 and 2) was noted in 24/35 (68.6%) patients. L/M ratios correlated significantly with adrenal SI in all sequences. Patients with grade 1 and grade 2 adrenal SI had significantly decreased L/M ratios compared with grade 0. Serum ferritin correlated significantly with L/M values but not with adrenal SI. Adrenal size was within normal limits. Diffuse hypointensity in normal-sized adrenals is a common MR finding in beta-thalassemic patients and correlates with the degree of hepatic siderosis.

Bone marrow changes in beta-thalassemia major: quantitative MR imaging findings and correlation with iron stores

The purpose of this study is to describe the MR imaging features of bone marrow in beta-thalassemia major and investigate their relation to ferritin, liver and spleen siderosis. Spinal bone marrow was prospectively assessed on abdominal MR studies of 40 transfused beta-thalassemic patients and 15 controls using T1-w, Pd, T2*-w Gradient Echo (GRE) and T1-w turbo Spin Echo (TSE) sequences. Signal intensity (SI) ratios of liver, spleen and bone marrow to paraspinous muscles (L/M, S/M, B/M respectively) and the respective T2 relaxation rates (1/T2) were calculated. Serum ferritin levels were recorded. Bone marrow hypointensity in at least T2*-w GRE sequence was noted in 29/40 (72.5%) patients. Eleven/40 patients exhibited normal B/M on all MR sequences. Five/40 patients had normal B/M and low L/M. B/M correlated with L/M in T1-w TSE sequence only (ru2009=u20090.471, pu2009=u20090.05). B/M correlated with S/M and mean ferritin values in all sequences (ru2009>u20090.489, pu2009<u20090.01 and ru2009u2009>u2009u2009−u20090.496, pu2009<u20090.03 respectively). Marrow 1/T2 did not correlate with ferritin values or liver and spleen 1/T2. B/M in transfused beta-thalassemic patients is related to splenic siderosis and ferritin levels. Although marrow is usually hypointense, it may occasionally display normal SI coexisting with liver hypointensity, a pattern typical of primary hemochromatosis.

An evaluation of the dosimetric performance characteristics of N-vinylpyrrolidone-based polymer gels.

The aim of this work was to investigate the dosimetric performance properties of the N-vinylpyrrolidone argon (VIPAR) based polymer gel as a dosimetric tool in clinical radiotherapy. VIPAR gels with a larger concentration of gelatin than the standard recipe were manufactured and irradiated up to 68 Gy using a 6 and 18 MV linear accelerator. Using MRI, the R2-dose response was recorded at different imaging sessions within a 34 day time period post-irradiation. The R2-dose response was found to be linear between 5 and 68 Gy. Although dose sensitivity did not show significant variation with time, the measured R2-dose values showed an increasing trend, which was less evident beyond 17 days. At one day post-irradiation, calculated dose standard uncertainties at 20 Gy and 56 Gy were 2.2% and 1.7%, providing a dose resolution of 0.45 Gy and 0.97 Gy, respectively. Although these values fulfilled the 2% limit of ICRU, when gels were imaged at one day post-irradiation, it was shown that the temporal evolution of the R2 values deteriorated the per cent standard uncertainty and the dose resolution by approximately 57%, when imaged 17 days post-irradiation. Variation in the coagulation temperature of the gels did not impact the R2-dose sensitivity. This study has shown that the VIPAR gel has the properties of a dosimetric tool required in clinical radiotherapy, especially in applications where a wide dose dynamic range is employed. For results with the lowest per cent uncertainty and the optimum dose resolution, the dosimetry gels used in this work should be MR scanned at one day post-irradiation. Furthermore, a preliminary study on the R2-dose response of a new normoxic N-vinylpyrrolidone-based polymer gel showed that it could potentially replace the traditional VIPAR gel formulation, while preserving the wide dynamic dose response inherent to that monomer.

MR imaging of spleen in beta-thalassemia major

PurposeSplenomegaly and splenic siderosis are well-known findings in beta-thalassemia major. We explored the relation between splenic size, splenic and hepatic siderosis in transfusion-dependent beta-thalassemic patients, assessed by MR imaging.Materials and methodsAbdominal MR imaging studies of 47 consecutive thalassemic patients and 10 healthy subjects, used as controls, were retrospectively reviewed. The signal intensity ratios of spleen and liver to the right paraspinous muscle (S/M, L/M, respectively) were calculated on T1, intermediate, and T2*-weighted gradient-echo sequences, splenic volume was estimated on axial images and serum ferritin levels were recorded.ResultsDecreased S/M on all MR sequences was displayed in 36 patients. Six patients presented with normal S/M on all MR sequences and 5 patients displayed splenic hypointensity only on T2* sequence. No correlation between S/M and L/M was found whereas both L/M and S/M correlated with serum ferritin (Pxa0<xa00.03). Splenic volume correlated to L/M (Pxa0<xa00.05) but not to S/M values.ConclusionIn transfusion-dependent patients with beta-thalassemia, iron deposition in spleen cannot be predicted by the degree of hepatic siderosis, whereas splenomegaly relates to liver, but not splenic, iron overload. MR imaging can be a valuable tool in elucidating iron kinetics.

Technical Note: A fast laser-based optical-CT scanner for three-dimensional radiation dosimetry

PURPOSEnTo introduce a novel laser-based optical-CT scanner for the readout of three-dimensional (3D) radiation dosimeters.nnnMETHODSnThe scanner employs a diode laser, a cylindrical lens, a motorized linear rail, a rotation stage, and a charge-coupled device camera. The scanner operates in a translate-rotate fashion and may be set up in two configurations depending on the orientation of the cylindrical lens. The attenuation coefficient versus dose response was determined for a normoxic N-vinylpyrrolidone based polymer gel dosimeter. Cylindrical dosimeters, 2 cm diameter, were homogenously irradiated to known doses up to 60 Gy using a 6 MV linear accelerator. For a test irradiation, a 5 cm diameter dosimeter was irradiated along its cylindrical axis using a rectangular 1 cm x 1 cm irradiation beam. The dose readout of this scanner was compared to the corresponding readout of a common wide illumination and area detector optical-CT scanner.nnnRESULTSnThe attenuation coefficient versus dose response of the laser-based system was found to be linear up to 60 Gy (r2 = 0.997) compared to the wide field illumination based optical-CT scanner, which exhibits linearity up to 32 Gy (r2 = 0.996). The noise in the reconstructed attenuation coefficient maps was +/- 7.2 x 10(-2) mm(-1) versus +/- 9.5 x 10(-3) mm(-1) for the laser-based system and the wide field illumination system, respectively.nnnCONCLUSIONSnWe have developed a novel laser-based optical-CT scanner, which is capable of generating fast 3D dosimetric data using a scattering polymer gel dosimeter. Our data demonstrate that the dose readout of this scanner preserves the advantage of existing laser-based optical-CT scanners in providing measurements, which are minimally affected by scattered light. For accurate reconstruction of the attenuation coefficients, noise reduction techniques need to be applied.

Deferoxamine Versus Combined Therapy for Chelating Liver, Spleen and Bone Marrow Iron in β-Thalassemic Patients: A Quantitative Magnetic Resonance Imaging Study

We used magnetic resonance imaging (MRI) to compare the effect of iron chelation on liver, spleen and bone marrow. We examined 21 β-thalassemic patients undergoing deferoxamine (DFO) (9/21) or combined therapy [DFO and deferiprone (L1), 12/21] with two abdominal MRI studies using T1-w/Pd-w/T2*-wGRE and T1-wTSE sequences. Changes in serum ferritin (DF%), and liver, spleen and marrow to paraspinous muscles signal intensity ratios (SI) in T1-wTSE sequence were calculated as D%=[(2ndvalue-1st value)/1st value] ×100%. Negative DF% and positive D(SI)% indicated reduction of iron. Although 17/21 (80.9%) patients demonstrated reduction in ferritin, only 8/21 (38%), 7/21 (33.3%) and 7/21 (33.3%) patients had decreased liver, spleen and marrow iron. Patients undergoing combined therapy showed significantly greater reduction (Students t-test, p < 0.05) or less increase (t-test, p <0.05) in iron stores. Combined therapy is more effective than DFO for removing and preventing liver, spleen and bone marrow iron accumulation in β-thalassemic patients. Magnetic resonance imaging is valuable for organ-specific monitoring of chelation therapy.

Broadband ultrasound attenuation imaging: influence of location of region of measurement

Abstract. The aim of the study was to investigate the effect of three different regions of interest (ROIs) varying in size and shape on broadband ultrasound attenuation (BUA) measurements of the calcaneus. Two hundred and sixty-five postmenopausal Caucasian women participated in this study. In 43 women osteoporotic fractures were documented on spinal radiographs. Bone mineral density (BMD) measurements of the lumbar spine and the femur were made using dual-energy X-ray absorptiometry. BUA measurements were obtained at a circular ROI automatically determined by the imaging system (ROIc), at a manually traced irregular ROI encompassing the posterior part of the calcaneus (ROIi), and at an anatomical square ROI located in the posterior part of the calcaneus (ROIs). Reproducibility was better in ROIc than in ROIi and ROIs. High correlations were found between BUA measurements with ROIc and ROIs (r=0.981, P<0.0001) as well as between those with ROIc and ROIi (r=0.965, P<0.0001). There were no significant differences between the correlations of BUA with axial BMD at ROIc compared with ROIi and ROIs. No significant difference was found between the areas under the ROC curve at ROIi, ROIc, and ROIs for women with fractures. The results show that superior reproducibility makes ROIc the most appropriate region of BUA measurement in a comparison with ROIi and ROIs.