Alexander Belousov

The 26 December (Boxing Day) 1997 sector collapse and debris avalanche at Soufrière Hills Volcano, Montserrat

Abstract The southern sector of Soufrière Hills Volcano failed on 26 December 1997 (Boxing Day), after a year of disturbance culminating in a devastating eruptive episode. Sector collapse produced a c. 50 x 106m3 volcanic debris avalanche, and depressurized the interior of the lava dome, which exploded to generate a violent pyroclastic density current. The south-directed growth of a lava lobe and build-up of lava-block talus, since early November 1997, brought the hydrothermally weakened sector to a condition of marginal stability. Limit-equilibrium stability analyses and finite-difference stress-deformation analyses, constrained by geomechanical testing of edifice and debris avalanche materials, suggest that the sector collapse was triggered by a pulse of co-seismic exogenous lava shear-lobe emplacement. Slip-surface localization was influenced by strain-weakening. The source region fragmented into avalanche megablocks, and further disruption generated a chaotic avalanche mixture that included variably indurated and coloured hydrothermally altered material, and much talus. The avalanche consisted of several flow pulses that reflected complexities of source disruption and channel topography. In the proximal zone, within 1.5 km from source, many megablocks preserve pre-collapse stratigraphy. At major bends the avalanche separated into channelled and overspill flows. In the distal region, <2.5km from source, stacked sets of the main lithologies occur with a hummocky surface and abrupt flowage snouts, beyond which sparse hummocks occur in a thinly spread deposit. Textures suggest emplacement by laminar mass transport of partly saturated debris riding on a frictionally sheared base. Three-dimensional numerical simulations of emplacement governed by a Coulomb-type (Pouliquen) basal friction law imply low values of friction (> 15°), consistent with geotechnical test data and the localized presence of pore-water pressures. The best-fit model suggests an emplacement time >3 minutes and a typical maximum velocity of about 40ms_1, which are consistent with field estimates.

The Shiveluch volcanic eruption of 12 November 1964—explosive eruption provoked by failure of the edifice

Abstract Restudy of deposits at Shiveluch in comparison with other data has shown that the sequence of eruptive events at Shiveluch volcano on 12 November 1964 was the following: edifice failure involving 1.154 km3 of material at 07:07 a.m.; phreatic explosion with ejection of resurgent ash with a volume of 0.01 km3; Plinian activity between 07:20 and 07:47 a.m., during which andesitic juvenile tephra with a volume of 0.3 km3 erupted. During the final stage of the eruption between 07:47 and 08:22 a.m., pyroclastic flows with a volume of 0.3 – 0.5 km3 were erupted. In this sequence, there was no catastrophic directed blast with generation of a destructive pyroclastic density current like those that took place at Bezymianny volcano in 1956 and at Mount St. Helens in 1980. The absence of a directed blast is attributed to the fact that the 1964 eruption occurred before magma had enough time to intrude into the edifice and build a cryptodome. The failure of the edifice depressurized only a hydrothermal system that existed around the old domes. This appears to have been insufficient for the generation of a catastrophic directed blast. The case history of volcanic activity at Shiveluch before 1964 suggests that if the edifice of the Young Shiveluch had been stronger and had not failed by landsliding, the eruption of 1964 might have consisted of prolonged dome extrusion with relatively weak explosive activity.

Volcanic tsunami: a review of source mechanisms, past events and hazards in Southeast Asia (Indonesia, Philippines, Papua New Guinea)

AbstractSoutheast Asia has had both volcanic tsunamis and possesses some of the most densely populated, economically important and rapidly developing coastlines in the world. This contribution provides a review of volcanic tsunami hazard in Southeast Asia. Source mechanisms of tsunami related to eruptive and gravitational processes are presented, together with a history of past events in the region. A review of available data shows that many volcanoes are potentially tsunamigenic and present often neglected hazard to the rapidly developing coasts of the region. We highlight crucial volcanic provinces in Indonesia, the Philippines and Papua New Guinea and propose strategies for facing future events.

Coupling eruption and tsunami records: the Krakatau 1883 case study, Indonesia

The well-documented 1883 eruption of Krakatau volcano (Indonesia) offers an opportunity to couple the eruption’s history with the tsunami record. The aim of this paper is not to re-analyse the scenario for the 1883 eruption but to demonstrate that the study of tsunami deposits provides information for reconstructing past eruptions. Indeed, though the characteristics of volcanogenic tsunami deposits are similar to those of other tsunami deposits, they may include juvenile material (e.g. fresh pumice) or be interbedded with distal pyroclastic deposits (ash fall, surges), due to their simultaneity with the eruption. Five kinds of sedimentary and volcanic facies related to the 1883 events were identified along the coasts of Java and Sumatra: (1) bioclastic tsunami sands and (2) pumiceous tsunami sands, deposited respectively before and during the Plinian phase (26–27 August); (3) rounded pumice lapilli reworked by tsunami; (4) pumiceous ash fall deposits and (5) pyroclastic surge deposits (only in Sumatra). The stratigraphic record on the coasts of Java and Sumatra, which agrees particularly well with observations of the 1883 events, is tentatively linked to the proximal stratigraphy of the eruption.

Resolving discordant U–Th–Ra ages: constraints on petrogenetic processes of recent effusive eruptions at Tatun Volcano Group, northern Taiwan

Abstract U–Th–Ra isotope analyses of whole rocks and mineral separates were conducted in order to perform isochron dating of three morphologically young lavas from Tatun volcano, northern Taiwan (from Mt Cising, the Shamao dome and the Huangzuei volcano). The data do not yield tight U–Th isochrons, indicating open-system magmatic processes. However, crystallization ages of two samples can be constrained: namely, less than about 1370 years for the Shamao dome, based on 226Ra–230Th disequilibrium in magnetite, and less than approximately 70 ka (but potentially Holocene) for a Huangzuei flow, based on 238U–230Th disequilibrium in plagioclase. Discordant Ar–Ar, 238U–230Th and 226Ra–230Th ages are best explained by young lavas having inherited some crystals from older lithologies (crystal mushes or rocks), and indicate that the above ages represent maxima. Our study provides the first evidence of effusive volcanism at the Tatun Volcano Group in Late Holocene times. All separates from the Shamao dome and Huangzuei volcano are in 234U–238U equilibrium. Minerals in the Mt Cising sample are in 234U–238U disequilibrium, despite the 234U–238U equilibrium of the whole rock. We interpret this as uptake of a hydrothermally altered, old crystal cargo into fresh melt prior to eruption. A different dating approach will thus be required to constrain the eruption age of Mt Cising. Supplementary material: Ar–Ar plateaus from Mt Cising and the Shamao dome, reproduced from Lee (1996), are available at www.geolsoc.org.uk/SUP18817

Generation of calc-alkaline andesite of the Tatun volcanic group (Taiwan) within an extensional environment by crystal fractionation

The Pliocene–Pleistocene northern Taiwan volcanic zone (NTVZ) is located within a trench-arc–back-arc basin and oblique arc–continent collision zone. Consequently the origin and tectonic setting of the andesitic rocks within the NTVZ and their relation to other circum-Pacific volcanic island-arc systems is uncertain. Rocks collected from the Tatun volcanic group (TTVG) include basaltic to andesitic rocks. The basalt is compositionally similar to within-plate continental tholeiites whereas the basaltic andesite and andesite are calc-alkaline; however, all rocks show a distinct depletion of Nb-Ta in their normalized incompatible element diagrams. The Sr-Nd isotope compositions of the TTVG rocks are very similar and have a relatively restricted range (i.e. ISr = 0.70417–0.70488; εNd(T) = +2.2 to +3.1), suggesting that they are derived directly or indirectly from the same mantle source. The basalts are likely derived by mixing between melts from the asthenosphere and a subduction-modified subcontinental lithospheric mantle (SCLM) source, whereas the basaltic andesites may be derived by partial melting of pyroxenitic lenses within the SCLM and mixing with asthenospheric melts. MELTS modelling using a starting composition equal to the most primitive basaltic andesite, shallow-pressure (i.e. ≤1 kbar), oxidizing conditions (i.e. FMQ +1), and near water saturation will produce compositions similar to the andesites observed in this study. Petrological modelling and the Sr-Nd isotope results indicate that the volcanic rocks from TTVG, including the spatially and temporally associated Kuanyinshan volcanic rocks, are derived from the same mantle source and that the andesites are the product of fractional crystallization of a parental magma similar in composition to the basaltic andesites. Furthermore, our results indicate that, in some cases, calc-alkaline andesites may be generated by crystal fractionation of mafic magmas derived in an extensional back-arc setting rather than a subduction zone setting.

Translations of volcanological terms: cross-cultural standards for teaching, communication, and reporting

When teaching at a non-English language university, we often argue that because English is the international language, students need to become familiar with English terms, even if the bulk of the class is in the native language. However, to make the meaning of the terms clear, a translation into the native language is always useful. Correct translation of terminology is even more crucial for emergency managers and decision makers who can be confronted with a confusing and inconsistently applied mix of terminology. Thus, it is imperative to have a translation that appropriately converts the meaning of a term, while being grammatically and lexicologically correct, before the need for use. If terms are not consistently defined across all languages following industry standards and norms, what one person believes to be a dog, to another is a cat. However, definitions and translations of English scientific and technical terms are not always available, and language is constantly evolving. We live and work in an international world where English is the common language of multi-cultural exchange. As a result, while finding the correct translation can be difficult because we are too used to the English language terms, translated equivalents that are available may not have been through the peer review process. We have explored this issue by discussing grammatically and lexicologically correct French, German, Icelandic, Indonesian, Italian, Portuguese, Russian, Spanish, and Japanese versions for terms involved in communicating effusive eruption intensity.