Alexander I. Chernov

Mode-locked 1.93 μm thulium fiber laser with a carbon nanotube absorber

We report a ring-cavity thulium fiber laser mode locked with a single-wall carbon nanotube absorber used in transmission. A carboxymethyl cellulose polymer film with incorporated carbon nanotubes synthesized by the arc discharge method has an absorption coinciding with in the amplification bandwidth of a Tm-doped fiber. This laser is pumped by an erbium fiber laser at 1.57 μm wavelength and produces a 37 MHz train of mode-locked 1.32 ps pulses at 1.93 μm wavelength with an average output power of 3.4 mW.

Chiral-Selective Growth of Single-Walled Carbon Nanotubes on Lattice-Mismatched Epitaxial Cobalt Nanoparticles

Controlling chirality in growth of single-walled carbon nanotubes (SWNTs) is important for exploiting their practical applications. For long it has been conceptually conceived that the structural control of SWNTs is potentially achievable by fabricating nanoparticle catalysts with proper structures on crystalline substrates via epitaxial growth techniques. Here, we have accomplished epitaxial formation of monometallic Co nanoparticles with well-defined crystal structure, and its use as a catalyst in the selective growth of SWNTs. Dynamics of Co nanoparticles formation and SWNT growth inside an atomic-resolution environmental transmission electron microscope at a low CO pressure was recorded. We achieved highly preferential growth of semiconducting SWNTs (~90%) with an exceptionally large population of (6, 5) tubes (53%) in an ambient CO atmosphere. Particularly, we also demonstrated high enrichment in (7, 6) and (9, 4) at a low growth temperature. These findings open new perspectives both for structural control of SWNTs and for elucidating the growth mechanisms.

Predominant (6,5) Single-Walled Carbon Nanotube Growth on a Copper-Promoted Iron Catalyst

We have developed a magnesia (MgO)-supported iron-copper (FeCu) catalyst to accomplish the growth of single-walled carbon nanotubes (SWNTs) using carbon monoxide (CO) as the carbon source at ambient pressure. The FeCu catalyst system facilitates the growth of small-diameter SWNTs with a narrow diameter distribution. UV-vis-NIR optical absorption spectra and photoluminescence excitation (PLE) mapping were used to evaluate the relative quantities of the different (n,m) species. We have also demonstrated that the addition of Cu to the Fe catalyst can also cause a remarkable increase in the yield of SWNTs. Finally, a growth mechanism for the FeCu-catalyzed synthesis of SWNTs has been proposed.

177fs erbium-doped fiber laser mode locked with a cellulose polymer film containing single-wall carbon nanotubes

A mode-locked soliton erbium-doped fiber laser generating 177fs pulses is demonstrated. The laser pumped by a 85mW, 980nm laser diode emits 7mW at 1.56μm at a pulse repetition rate of 50MHz. Passive mode locking is achieved with a saturable absorber made of a high-optical quality film based on cellulose derivative with dispersed carbon single-wall nanotubes. The film is prepared with the original technique by using carbon nanotubes synthesized by the arc-discharge method.

Optical Properties of Graphene Nanoribbons Encapsulated in Single-Walled Carbon Nanotubes

We report the photoluminescence (PL) from graphene nanoribbons (GNRs) encapsulated in single-walled carbon nanotubes (SWCNTs). New PL spectral features originating from GNRs have been detected in the visible spectral range. PL peaks from GNRs have resonant character, and their positions depend on the ribbon geometrical structure in accordance with the theoretical predictions. GNRs were synthesized using confined polymerization and fusion of coronene molecules. GNR@SWCNTs material demonstrates a bright photoluminescence both in infrared (IR) and visible regions. The photoluminescence excitation mapping in the near-IR spectral range has revealed the geometry-dependent shifts of the SWCNT peaks (up to 11 meV in excitation and emission) after the process of polymerization of coronene molecules inside the nanotubes. This behavior has been attributed to the strain of SWCNTs induced by insertion of the coronene molecules.

Observation of timing jitter reduction induced by spectral filtering in a fiber laser mode locked with a carbon nanotube-based saturable absorber

A self-starting passively mode-locked fiber laser with a carbon nanotube-based saturable absorber and a fiber-based bandpass filter (BPF) is proposed. Incorporation of a BPF into the cavity leads to a great reduction of its timing jitter from 84.8 to 29.1 fs (10 Hz-3 MHz). This happens because the filtering effect can weaken the fluctuation of the central wavelength induced by the quantum noise, being one of the important contributions to timing jitter in the optical amplifying process.

Nonlinear coupling of relative intensity noise from pump to a fiber ring laser mode-locked with carbon nanotubes

Pump relative intensity noise (RIN) has been recognized as a major source of noise in mode-locked lasers. The coupling of RIN from the pump to the output of a passively mode-locked fiber laser (PMFL) is systematically investigated using a pump modulation technique. It is found that the linear RIN coupling ratio from pump to PMFL is decreased with an increase in modulation frequency and is independent of modulation power. Moreover, the nonlinear RIN coupling from pump to PMFL is clearly demonstrated with a square wave modulated pump. The nonlinear RIN coupling ratio is noise power dependent. An exponential decay model based on the view of gain modulation is proposed and explains well the behavior of the nonlinear coupling phenomena.

Generation of spin waves by a train of fs-laser pulses: a novel approach for tuning magnon wavelength

Currently spin waves are considered for computation and data processing as an alternative to charge currents. Generation of spin waves by ultrashort laser pulses provides several important advances with respect to conventional approaches using microwaves. In particular, focused laser spot works as a point source for spin waves and allows for directional control of spin waves and switching between their different types. For further progress in this direction it is important to manipulate with the spectrum of the optically generated spin waves. Here we tackle this problem by launching spin waves by a sequence of femtosecond laser pulses with pulse interval much shorter than the relaxation time of the magnetization oscillations. This leads to the cumulative phenomenon and allows us to generate magnons in a specific narrow range of wavenumbers. The wavelength of spin waves can be tuned from 15 μm to hundreds of microns by sweeping the external magnetic field by only 10 Oe or by slight variation of the pulse repetition rate. Our findings expand the capabilities of the optical spin pump-probe technique and provide a new method for the spin wave generation and control.

Insights into chirality distributions of single-walled carbon nanotubes grown on different CoxMg1−xO solid solutions

Low-temperature chemical vapor deposition (CVD) growth of single-walled carbon nanotubes (SWNTs) was achieved on two different types of CoxMg1−xO catalysts prepared by different techniques: atomic layer deposition (ALD) and impregnation. The chirality distribution of SWNTs grown on the ALD-prepared CoxMg1−xO catalyst is wider than that of SWNTs grown on the impregnation-prepared CoxMg1−xO catalyst. The different chirality distributions of SWNTs are related to their different growth modes. The ALD-prepared CoxMg1−xO catalyzes the growth of SWNTs by “tip growth” mode, as revealed by in situ environmental transmission electron microscopy studies. In contrast, SWNTs grow on the impregnation-prepared CoxMg1−xO by “base growth” mode. “Base growth” is attributed to strong metal–support interactions between the epitaxially formed Co nanoparticles and the underlying MgO support, accounting for the synthesis of SWNTs with high chiral-selectivity. In addition, impregnation-prepared CoxMg1−xO catalysts calcinated at different temperatures were systematically studied and their catalytic performances in synthesizing carbon nanotubes were elucidated. This work illustrates the influence of metal–support interactions and catalyst reducibility on the chirality-distribution of the synthesized SWNTs.

Optical excitation of spin waves in epitaxial iron garnet films: MSSW vs BVMSW.

In most of the previous studies of the spin wave optical generation in magnetic dielectrics, the backward volume spin waves were excited. Here we modified the parameters of the circularly polarized optical pump beams emitted by femtosecond laser to reveal surface spin waves in bismuth iron garnet thin film. Beams that are larger than 10 μm in diameter generate both surface and volume spin waves with only one spectral peak near the ferromagnetic resonance. On the contrary, narrower beams excite predominantly surface spin waves of higher frequency, providing an additional peak in the spin wave spectrum. Thus different interference patterns of the magnetization dynamics are achievable. This may significantly broaden the capabilities of spin wave based devices.