Alexander I. Gray

Natural products isolation.

Natural Product Isolation: An Overview Satyajit D. Sarker, Zahid Latif, and Alexander I. Gray Initial and Bulk Extraction Veronique Seidel Supercritical Fluid Extraction Lutfun Nahar and Satyajit D. Sarker An Introduction to Planar Chromatography Simon Gibbons Isolation of Natural Products by Low-Pressure Column Chromatography Raymond G. Reid and Satyajit D. Sarker Isolation by Ion-Exchange Methods David G. Durham Separation by High-Speed Countercurrent Chromatography James B. McAlpine and Patrick Morris Isolation by Preparative High-Performance Liquid Chromatography Zahid Latif Hyphenated Techniques Satyajit D. Sarker and Lutfun Nahar Purification by Solvent Extraction Using Partition Coefficient Hideaki Otsuka Crystallization in Final Stages of Purification Alastair J. Florence, Norman Shankland, and Andrea Johnston Dereplication and Partial Identification of Compounds Laurence Dinan Extraction of Plant Secondary Metabolites William P. Jones and A. Douglas Kinghorn Isolation of Marine Natural Products Wael E. Houssen and Marcel Jaspars Isolation of Microbial Natural Products Russell A. Barrow Purification of Water-Soluble Natural Products Yuzuru Shimizu and Bo Li Scale-Up of Natural Product Isolation Steven M. Martin, David A. Kau, and Stephen K. Wrigley Follow-Up of Natural Product Isolation Richard J. P. Cannell Index

Coumarins in the Rutaceae

Abstract The biogenesis, structural diversity and distribution of simple, furano- and pyranocoumarins in the Rutaceae is reviewed. The potential value of these compounds as taxonomic markers and their possible functions are discussed. The distribution of simple cinnamic acid precursors of coumarins in the family is also reviewed.

Polymeric Chitosan‐based Vesicles for Drug Delivery

A simple carbohydrate polymer glycol chitosan (degree of polymerization 800 approx.) has been investigated for its ability to form polymeric vesicle drug carriers. The attachment of hydrophobic groups to glycol chitosan should yield an amphiphilic polymer capable of self‐assembly into vesicles. Chitosan is used because the membrane‐penetration enhancement of chitosan polymers offers the possibility of fabricating a drug delivery system suitable for the oral and intranasal administration of gut‐labile molecules.

Antimicrobial activity of pentacyclic triterpenes isolated from African combretaceae

Four pentacyclic tritepenes were isolated from Combretum imberbe Engl. & Diels, of which two are novel glycosidic derivatives of 1alpha,3beta,23-trihydroxyolean-12-en-29-oic acid (hydroxyimberbic acid). Terminalia stuhlmannii Engl. & Diels stem bark yielded two glycosides of hydroxyimberbic acid, one of which is reported for the first time. The structures of the isolated compounds were elucidated by spectroscopic methods. Several of the compounds had antibacterial activity, imberbic acid showing particularly potent activity against Mycobacterium fortuitum and Staphylococcus aureus.

The release of model macromolecules may be controlled by the hydrophobicity of palmitoyl glycol chitosan hydrogels

A non-covalently cross-linked palmitoyl glycol chitosan (GCP) hydrogel has been evaluated as an erodible controlled release system for the delivery of hydrophilic macromolecules. Samples of GCP with hydrophobicity decreasing in the order GCP12>GCP11>GCP21 were synthesised and characterised by 1H NMR. Hydrogels were prepared by freeze-drying an aqueous dispersion of the polymer in the presence or absence of either a model macromolecule fluorescein isothiocyanate-dextran (FITC-dextran, MW 4400), and/or amphiphilic derivatives Gelucire 50/13 or vitamin E d-alpha-tocopherol polyethylene glycol succinate. Gels were analysed for aqueous hydration, FITC-dextran release, and bioadhesion, and imaged by scanning electron microscopy. The gels were highly porous and could be hydrated to up to 95x their original weight without an appreciable volume change and most gels eventually eroded. Hydration and erosion were governed by the hydrophobicity of the gel and the presence of the amphiphilic additives. GCP gels could be loaded with up to 27.5% (w/w) of FITC-dextran by freeze-drying a dispersion of GCP in a solution of FITC-dextran. The controlled release of FITC-dextran was governed by the hydrophobicity of the gel following the trend GCP21>GCP11>GCP12. GCP gels were bioadhesive but less so than hydroxypropylmethylcellulose, Carbopol 974NF (7:3) tablets.

A non-covalently cross-linked chitosan based hydrogel

Hydrogels are normally formed by the covalent cross-linking of linear polymers. In the case of chitosan based hydrogels this cross-linking is often achieved with glutaraldehyde, glyoxal or other reactive cross-linking agents. Such hydrogel materials have limited biocompatibility and biodegradability. However by the attachment of hydrophobic palmitoyl groups to glycol chitosan, a water soluble chitosan derivative, we have produced a version of the amphiphilic vesicle forming polymer-palmitoyl glycol chitosan (Uchegbu et al., 1998, J Pharm Pharmacol 58, 453-458). The level of palmitoylation in this variant of the polymer (GCP11), as determined by proton neutron magnetic resonance spectroscopy, is 19.62+/-2.42% (n=4). GCP11 has been used to prepare soft, slowly eroding hydrogels suitable for drug delivery by simply freeze-drying an aqueous dispersion of the polymer. Non-covalent cross-linking to form the gel matrix is achieved by the hydrophobic interactions of the palmitoyl groups. The resulting material, as examined by scanning electron microscopy, is porous and may be hydrated to up to 20x its weight in aqueous media without any appreciable change in volume-transforming from an opaque to a translucent solid. The slow erosion of this material in aqueous environments gives a biodegradable and ultimately more biocompatible material than covalently cross-linked hydrogels. Unlike most chitosan-based gels, the gel is hydrated to 20x its weight at alkaline pH but only 10x its weight at neutral and acid pH. This is as a result of the gradual erosion of the gel at lower pH values. Hydration is also reduced from 20x the dry gel weight in water to 10x the dry gel weight in the presence of dissolved salts such as sodium chloride. GCP11 hydrogels have been loaded to 0.1% w/w with a model fluorophore, rhodamine B, by simply freeze-drying an aqueous dispersion of GCP11 in the presence of a solution of rhodamine B dissolved in either water or phosphate buffered saline (PBS, pH=7.4). The release of this model fluorophore was retarded by between 8 and 12% when PBS was contained in the gel in accordance with the hydration profiles. Rhodamine B release was also reduced by between 13 and 25% in the presence of acid as a result of the reduced solubility of rhodamine B at acid pH.

Quaternary ammonium palmitoyl glycol chitosan--a new polysoap for drug delivery.

A new polysoap, quaternary ammonium palmitoyl glycol chitosan (GCPQ, M(w)=178,000 g mole(-1)) with drug solubilising potential has been synthesised and characterised. In solution hydrophobic domains of GCPQ polymeric micelles were identified by the hypsochromic shift in the lambda(max) of methyl orange and by the increase in the ratio of the fluorescence emission intensity of the third and first pyrene vibronic peaks (I(3)/I(1)). At high aqueous concentrations (>10 mg ml(-1)) GCPQ presents as a gel which solubilises pyrene (2.5 mM, normal solubility in water approximately 2 microM) on probe sonication. Dilution of the gel to a liquid solution of polymeric micelles (< or =3.75 mg ml(-1) of GCPQ), results in the observation of fluorescent pyrene excimers (excited dimers) and a high excimer to monomer fluorescence ratio (I(E)/I(M)). However, attempts to solubilise pyrene at a concentration of 2.5 mM in a liquid solution of GCPQ (3.75 mg ml(-1)) results in a reduced I(E)/I(M) value and pyrene precipitation. Viscometry measurements show a more compact conformation for the polymer solubilising pyrene than the polymer alone. The polymer is non-haemolytic when present as the liquid solution and relatively non cytotoxic. In conclusion, a new biocompatible polysoap (potential drug solubiliser) is described which forms hydrophobic domains in solution and shows hysteresis in its solubilisation of pyrene.

Bacterial resistance modifying agents from Lycopus europaeus.

As part of an ongoing project to identify plant natural products which modulate bacterial multidrug resistance (MDR), bioassay-guided isolation of an extract of Lycopus europaeus yielded two new isopimarane diterpenes, namely methyl-1alpha-acetoxy-7alpha 14alpha-dihydroxy-8,15-isopimaradien-18-oate (1) and methyl-1alpha,14alpha-diacetoxy-7alpha-hydroxy-8,15-isopimaradien-18-oate (2). The structures were established by spectroscopic methods. These compounds and several known diterpenes were tested for in vitro antibacterial and resistance modifying activity against strains of Staphylococcus aureus possessing the Tet(K), Msr(A), and Nor(A) multidrug resistance efflux mechanisms. At 512 microg/ml none of the compounds displayed any antibacterial activity but individually in combination with tetracycline and erythromycin, a two-fold potentiation of the activities of these antibiotics was observed against two strains of S. aureus that were highly resistant to these agents due to the presence of the multidrug efflux mechanisms Tet(K) (tetracycline resistance) and Msr(A) (macrolide resistance).

The effects of cardamonin on lipopolysaccharide‐induced inflammatory protein production and MAP kinase and NFκB signalling pathways in monocytes/macrophages

In this study we examined the effect of the natural product cardamonin, upon lipopolysaccharide (LPS)‐induced inflammatory gene expression in order to attempt to pinpoint the mechanism of action.

Niosomes and polymeric chitosan based vesicles bearing transferrin and glucose ligands for drug targeting

AbstractPurpose. To prepare polymeric vesicles and niosomes bearing glucose or transferrin ligands for drug targeting. Methods. A glucose-palmitoyl glycol chitosan (PGC) conjugate was synthesised and glucose-PGC polymeric vesicles prepared by sonication of glucose-PGC/ cholesterol. N-palmitoylglucosamine (NPG) was synthesised and NPG niosomes also prepared by sonication of NPG/ sorbitan monostearate/ cholesterol/ cholesteryl poly-24-oxyethylene ether. These 2 glucose vesicles were incubated with colloidal concanavalin A gold (Con-A gold), washed and visualised by transmission electron microscopy (TEM). Transferrin was also conjugated to the surface of PGC vesicles and the uptake of these vesicles investigated in the A431 cell line (over expressing the transferrin receptor) by fluorescent activated cell sorter analysis. Results. TEM imaging confirmed the presence of glucose units on the surface of PGC polymeric vesicles and NPG niosomes. Transferrin was coupled to PGC vesicles at a level of 0.60 ± 0.18 g of transferrin per g polymer. The proportion of FITC-dextran positive A431 cells was 42% (FITC-dextran solution), 74% (plain vesicles) and 90% (transferrin vesicles). Conclusions. Glucose and transferrin bearing chitosan based vesicles and glucose niosomes have been prepared. Glucose bearing vesicles bind Con-A to their surface. Chitosan based vesicles are taken up by A431 cells and transferrin enhances this uptake.