Alexander M. Kirillov

Copper(II) coordination polymers derived from triethanolamine and pyromellitic acid for bioinspired mild peroxidative oxidation of cyclohexane.

The new inorganic 1D coordination polymer [Cu2(H3tea)2(mu4-pma)]n has been prepared, via self-assembly in aqueous medium, from copper(II) nitrate, triethanolamine (H3tea), pyromellitic acid (H4pma) and lithium hydroxide, and characterized by IR spectroscopy, elemental and single-crystal X-ray diffraction analyses. This compound and the related 2D polymer [Cu2(mu-H2tea)(2){mu3-Na2(H2O)4}(mu6-pma)]n.10nH2O are shown to mimic the alkane partial oxidation activity of the multicopper particulate methane monooxygenase, acting as catalysts precursors for the peroxidative oxidation of cyclohexane into cyclohexanol and cyclohexanone, by hydrogen peroxide (as green oxidant) and at room temperature in acidic MeCN/H2O medium. An overall yield (based on cyclohexane) of 29% has been achieved.

Self-Assembled 3D Heterometallic CuII/FeII Coordination Polymers with Octahedral Net Skeletons: Structural Features, Molecular Magnetism, Thermal and Oxidation Catalytic Properties

The new three-dimensional (3D) heterometallic Cu(II)/Fe(II) coordination polymers [Cu(6)(H(2)tea)(6)Fe(CN)(6)](n)(NO(3))(2n)·6nH(2)O (1) and [Cu(6)(Hmdea)(6)Fe(CN)(6)](n)(NO(3))(2n)·7nH(2)O (2) have been easily generated by aqueous-medium self-assembly reactions of copper(II) nitrate with triethanolamine or N-methyldiethanolamine (H(3)tea or H(2)mdea, respectively), in the presence of potassium ferricyanide and sodium hydroxide. They have been isolated as air-stable crystalline solids and fully characterized including by single-crystal X-ray diffraction analyses. The latter reveal the formation of 3D metal-organic frameworks that are constructed from the [Cu(2)(μ-H(2)tea)(2)](2+) or [Cu(2)(μ-Hmdea)(2)](2+) nodes and the octahedral [Fe(CN)(6)](4-) linkers, featuring regular (1) or distorted (2) octahedral net skeletons. Upon dehydration, both compounds show reversible escape and binding processes toward water or methanol molecules. Magnetic susceptibility measurements of 1 and 2 reveal strong antiferromagnetic [J = -199(1) cm(-1)] or strong ferromagnetic [J = +153(1) cm(-1)] couplings between the copper(II) ions through the μ-O-alkoxo atoms in 1 or 2, respectively. The differences in magnetic behavior are explained in terms of the dependence of the magnetic coupling constant on the Cu-O-Cu bridging angle. Compounds 1 and 2 also act as efficient catalyst precursors for the mild oxidation of cyclohexane by aqueous hydrogen peroxide to cyclohexanol and cyclohexanone (homogeneous catalytic system), leading to maximum total yields (based on cyclohexane) and turnover numbers (TONs) up to about 22% and 470, respectively.

A ratiometric fluorescent nanoprobe based on terbium functionalized carbon dots for highly sensitive detection of an anthrax biomarker

A ratiometric fluorescent nanoprobe based on terbium functionalized carbon dots (CDs) was designed to detect dipicolinic acid (DPA) as an anthrax biomarker with high selectivity and sensitivity. CDs were generated by one-step synthesis using an ethylenediaminetetraacetic acid precursor, and served as a scaffold for coordination with Tb(3+) and a fluorescence reference.

Topologically Unique Heterometallic CuII/Li Coordination Polymers Self-Assembled from N,N-bis(2-Hydroxyethyl)-2-aminoethanesulfonic Acid Biobuffer: Versatile Catalyst Precursors for Mild Hydrocarboxylation of Alkanes to Carboxylic Acids

The facile aqueous medium reactions of copper(II) nitrate with BES biobuffer [(HOCH(2)CH(2))(2)N(CH(2)CH(2)SO(3)H), hereinafter referred as H(3)bes] in the presence of various benzenecarboxylic acids [benzoic (Hba), 3-hydroxybenzoic (Hhba), and 3,5-dihydroxybenzoic (Hdhba) acid] and lithium hydroxide gave rise to the self-assembly generation of three new heterometallic Cu(II)/Li materials, [Li(H(2)O)(4)][Cu(4)(μ(2)-Hbes)(4)(μ(2)-ba)]·H(2)O (1) and [Cu(4)(μ(3)-Hbes)(4)(L){Li(H(2)O)(2)}](n)·3nH(2)O {L = μ(2)-hba (2) and μ(2)-dhba (3)}. They were isolated as air-stable crystalline solids and fully characterized by infrared (IR) and UV-vis spectroscopy and electrospray ionization (ESI)-MS(±), elemental, thermal, and single-crystal X-ray diffraction analyses. The latter revealed that 1-3 have comparable packing patterns and unit cell parameters, being composed of similar [Cu(4)(μ-Hbes)(4)(μ-carboxylate)](-) cores and [Li(H(2)O)(4)](+) cations (in 1) or [μ-Li(H(2)O)(2)](+) groups (in 2 and 3), which are arranged into discrete 0D aggregates in 1 or infinite 3D noninterpenetrating metal-organic networks in 2 and 3. The topological analysis of the coordination polymers 2 and 3 disclosed the trinodal 3,3,4-connected underlying nets with an unprecedented topology defined by the point symbol of (4.6.8)(4)(4(2).6)(2)(6(2).16(2).18(2)), further simplification of which resulted in the binodal 4,4-connected nets with the pts (PtS) topology. Apart from representing very rare examples of coordination compounds derived from H(3)bes, 1-3 feature solubility in water and were applied as efficient and versatile catalyst precursors for the mild (60 °C) single-pot hydrocarboxylation, by CO and H(2)O, of various gaseous, linear, and cyclic C(n) (n = 2-9) alkanes into the corresponding C(n+1) carboxylic acids, in H(2)O/MeCN medium under homogeneous conditions and in the presence of potassium peroxodisulfate. Total yields (based on alkane) of carboxylic acids up to 78% were achieved, which are remarkable in the field of alkane functionalization under mild conditions, especially for a C-C bond formation reaction in aqueous acid-solvent-free medium.

Self-assembled dicopper(II) diethanolaminate cores for mild aerobic and peroxidative oxidation of alcohols†

The new dicopper(ii) complexes [Cu(2)(μ-Hmdea)(2)(NCS)(2)] (1) and [Cu(2)(μ-Hedea)(2)(N(3))(2)]·(H(2)O)(0.25) (2) with the {Cu(2)(μ-O)(2)} diethanolaminate cores have been easily generated by aqueous medium self-assembly reactions of copper(ii) nitrate with N-methyl- or N-ethyldiethanolamine (H(2)mdea or H(2)edea, respectively), in the presence of sodium thiocyanate (for 1) or sodium azide (for 2) as ancillary ligands sources. They have been isolated as air-stable crystalline solids and fully characterized by IR and UV-vis spectroscopies, ESI-MS(+), elemental and single-crystal X-ray diffraction analyses. The latter complex also features a fourfold linkage of neighbouring dimeric units via strong intermolecular O-HO hydrogen bonds, giving rise to the formation of tetracopper aggregates. The catalytic activity of compounds 1 and 2 has been studied for the mild (50-80 °C) and selective oxidations of alcohols, namely for (i) the aerobic aqueous medium oxidation of benzyl alcohols to benzaldehydes, mediated by TEMPO radical, and for (ii) the solvent-free oxidation of secondary alcohols to ketones by t-BuOOH under microwave (MW) irradiation. Complex 2 shows the highest efficiency in both oxidation systems, resulting in up to 99% molar yields (based on the alcohol substrate) of products. In addition, remarkably high values of TON (1020) and TOF (4080 h(-1)) have been achieved in the MW-assisted peroxidative oxidation of 1-phenylethanol to acetophenone (model reaction). Attractive green features of these catalytic systems include the operation in aqueous or solvent-free reaction medium, under mild conditions and with high yields and selectivities, using Cu catalyst precursors that are readily available by self-assembly in water of simple chemicals.

Alkanes to carboxylic acids in aqueous medium: metal-free and metal-promoted highly efficient and mild conversions

A convenient and clean route to transform, in aqueous medium, various alkanes to carboxylic acids via single-pot carboxylation with CO and water, under mild conditions, has been achieved, proceeding efficiently and selectively even without any metal catalyst and any acid additive, at low temperatures; the relevant hydroxylating role of H(2)O and radical mechanisms are disclosed by radical-trap, H(2)(18)O and DFT studies.

Bringing an Old Biological Buffer to Coordination Chemistry: New 1D and 3D Coordination Polymers with [Cu4(HbeS)4] Cores for Mild Hydrocarboxylation of Alkanes

New water-soluble 1D and 3D Cu(II)/Na coordination polymers 1-3 bearing unprecedented [Cu(4)(Hbes)(4)] cores have been easily generated by aqueous-medium self-assembly and fully characterized, thus opening up the use of the common biological buffer H(3)bes, (HO(3)SCH(2)CH(2))N(CH(2)CH(2)OH)(2), in synthetic coordination chemistry. Apart from representing the first isolated and structurally characterized coordination compounds derived from H(3)bes, 1-3 show a remarkable promoting effect in the mild aqueous-medium hydrocarboxylation, by CO and H(2)O, of gaseous alkanes (C(3)H(8) and n-C(4)H(10)) to the corresponding carboxylic acids, which are obtained in up to 95% yields based on the alkane.

Copper–organic frameworks assembled from in situ generated 5-(4-pyridyl)tetrazole building blocks: synthesis, structural features, topological analysis and catalytic oxidation of alcohols

Two new metal-organic compounds {[Cu3(μ3-4-ptz)4(μ2-N3)2(DMF)2](DMF)2}n (1) and {[Cu(4-ptz)2(H2O)2]}n (2) {4-ptz = 5-(4-pyridyl)tetrazolate} with 3D and 2D coordination networks, respectively, have been synthesized while studying the effect of reaction conditions on the coordination modes of 4-pytz by employing the [2 + 3] cycloaddition as a tool for generating in situ the 5-substituted tetrazole ligands from 4-pyridinecarbonitrile and NaN3 in the presence of a copper(ii) salt. The obtained compounds have been structurally characterized and the topological analysis of 1 discloses a topologically unique trinodal 3,5,6-connected 3D network which, upon further simplification, results in a uninodal 8-connected underlying net with the bcu (body centred cubic) topology driven by the [Cu3(μ2-N3)2] cluster nodes and μ3-4-ptz linkers. In contrast, the 2D metal-organic network in 2 has been classified as a uninodal 4-connected underlying net with the sql [Shubnikov tetragonal plane net] topology assembled from the Cu nodes and μ2-4-ptz linkers. The catalytic investigations disclosed that 1 and 2 act as active catalyst precursors towards the microwave-assisted homogeneous oxidation of secondary alcohols (1-phenylethanol, cyclohexanol, 2-hexanol, 3-hexanol, 2-octanol and 3-octanol) with tert-butylhydroperoxide, leading to the yields of the corresponding ketones up to 86% (TOF = 430 h(-1)) and 58% (TOF = 290 h(-1)) in the oxidation of 1-phenylethanol and cyclohexanol, respectively, after 1 h under low power (10 W) microwave irradiation, and in the absence of any added solvent or additive.

Mild, single-pot hydrocarboxylation of gaseous alkanes to carboxylic acids in metal-free and copper-promoted aqueous systems.

A direct, selective and highly efficient method has been developed for the hydrocarboxylation of C(n) gaseous alkanes into C(n+1) carboxylic acids, in aqueous acid-solvent-free medium at low temperatures. The approach is based on a metal-free or copper-promoted reaction of ethane, propane or n-butane with carbon monoxide and water, in a H(2)O/MeCN medium at 50-60 degrees C, in the presence of potassium peroxodisulfate. The effects of various reaction parameters, such as the absence or presence of a copper promoter, solvent composition, temperature, time, CO and alkane pressure, were studied. A free radical mechanism was confirmed by radical trap experiments involving acyl radical formation, oxidation and subsequent hydroxylation by water. Remarkable yields (based on alkane) of carboxylic acids in the 34-41 % range were achieved even in the metal-free systems, although in the presence of a tetracopper(II) triethanolaminate derived promoter they reach superior values of 58 and 87 % for the hydrocarboxylations of propane and n-butane, respectively; in these cases, branched isobutyric and 2-methylbutyric acids were the predominant products. From a green perspective, important features of the present alkane hydrocarboxylations include the exceptional metal-free, mild and acid-solvent-free reaction conditions, the operation in aqueous medium with a rare hydroxylating role of water, with high selectivities, and yields of carboxylic acids. Taken together, these conditions correspond to the mildest and the most efficient method so far reported for the oxidative functionalisation of gaseous alkanes.

Heteronuclear iron(III)-chromium(III) hydroxo complexes and hydroxides, and their catalytic activity towards peroxidative oxidation of alkanes

The equilibrium compositions of the products of hydrolysis of Fe(III) and Cr(III) in their single or binary nitrate solutions, as a function of pH and neutralisation degree have been established and Fe(III)–Cr(III) hydroxides and products of their thermolysis have been obtained and characterized by potentiometric titration, thermal analysis, IR spectroscopy and X-ray powder diffraction, and an Fe(III)–Cr(III) interaction recognised in the binary systems. The obtained aquahydroxo complexes and metal hydroxides have been applied as catalysts for the homogeneous or heterogeneous, respectively, peroxidative oxidation of cyclohexane and cyclopentane to the corresponding ketones and alcohols, at room temperature. The effects of various parameters, such as pH, degree of neutralisation and reagents molar ratios, have been investigated and correlations between the catalytic activity and the form of the hydroxo complex were recognised for the homogeneous systems, whereas for the heterogeneous mixed (heteronuclear) hydroxides a synergic effect has been detected for the oxidation of cyclohexane, the catalytic activity (which can reach 30% yields and 30 turnover numbers (TONs)) being above those of the individual hydroxides.