Alexander Murray

DEVELOPMENT OF A STEADY-STATE EXPERIMENTAL FACILITY FOR THE ANALYSIS OF DOUBLE-WALL EFFUSION COOLING GEOMETRIES

The continuous drive for ever higher turbine entry temperatures is leading to considerable interest in high performance cooling systems which offer high cooling effectiveness with low coolant utilization. The double-wall system is an optimized amalgamation of more conventional cooling methods including impingement cooling, pedestals, and film cooling holes in closely packed arrays characteristic of effusion cooling. The system comprises two walls, one with impingement holes, and the other with film holes. These are mechanically connected via pedestals allowing conduction between the walls while increasing coolant-wetted area and turbulent flow. However, in the open literature, experimental data on such systems are sparse. This study presents a new experimental heat transfer facility designed for investigating double-wall systems. Key features of the facility are discussed, including the use of infrared thermography to obtain overall cooling effectiveness measurements. The facility is designed to achieve Reynolds and Biot (to within 10%) number similarity to those seen at engine conditions. The facility is used to obtain overall cooling effectiveness measurements for a circular pedestal, double-wall test piece at three coolant mass-flows. A conjugate computational fluid dynamics (CFD) model of the facility was developed providing insight into the internal flow features. Additionally, a computationally efficient, decoupled conjugate method developed by the authors for analyzing double-wall systems is run at the experimental conditions. The results of the simulations are encouraging, particularly given how computationally efficient the method is, with area-weighted, averaged overall effectiveness within a small margin of those obtained from the experimental facility.

An Integrated Conjugate Computational Approach for Evaluating the Aerothermal and Thermomechanical Performance of Double-Wall Effusion Cooled Systems

The drive to further increase gas turbine thermal efficiency and specific power output continue to elevate core temperatures well beyond the natural capabilities of the metals employed in their manufacture necessitating increasingly complex cooling systems.One such cooling mechanism is the double-wall, effusion-cooled system which combines in a very compact format, many cooling aspects already implemented in gas turbine cooling. To-date, thermomechanical stresses have provided one of the more significant challenges in the implementation of these systems and needs to be considered — alongside aerothermal performance — at the initial stages of design.This paper presents a novel computational method that has been developed to allow an integrated assessment of both the aerothermal and thermomechanical performance of double-wall cooling geometries. A decoupled conjugate method was developed in which internal cooling performance was ascertained via a conjugate CFD model in which the mainstream flow was not simulated. Instead, external film cooling performance was assessed via a superposition method that was developed and applied to a two-dimensionally varying correlation allowing streamwise film development to be modelled. Results of both the internal and external cooling simulations were then utilised in a conduction model to develop a complete thermal assessment of the geometry. The calculated temperature distribution was used in a thermomechanical FEA analysis permitting an insight into the stress field developed within the double-wall geometry under thermal load.The developed method was demonstrated in the assessment of seven circular pedestal, double-wall geometries in which a range of geometric parameters were investigated. The results provide an insight into the effect of varying these parameters on both the aerothermal performance of the selected geometries, along with the effect on the thermomechanical stress field developed.Copyright