Alexander Sharenko

A High‐Performing Solution‐Processed Small Molecule:Perylene Diimide Bulk Heterojunction Solar Cell

By combining the molecular donor p-DTS(FBTTh2 )2 with a readily produced perylene diimide acceptor we are able to achieve a power conversion efficiency of 3.0%, making this one of the most efficient non-fullerene organic solar cells to date. The reduced power conversion efficiency of the present system compared to the use of phenyl-C71 -butyric acid methyl ester as an electron acceptor is shown to primarily be related to a significant reduction in the internal quantum efficiency. These results indicate the potential of small-molecule:non-fullerene bulk-heterojunction organic photovoltaics.

A modular molecular framework for utility in small-molecule solution-processed organic photovoltaic devices

We report on the design, synthesis and characterization of light harvesting small molecules for use in solution-processed small molecule bulk heterojunction (SM-BHJ) solar cell devices. These molecular materials are based upon an acceptor/donor/acceptor (A/D/A) core with donor endcapping units. Utilization of a dithieno(3,2-b;2′,3′-d)silole (DTS) donor and pyridal[2,1,3]thiadiazole (PT) acceptor leads to strong charge transfer characteristics, resulting in broad optical absorption spectra extending well beyond 700 nm. SM-BHJ solar cell devices fabricated with the specific example 5,5′-bis{7-(4-(5-hexylthiophen-2-yl)thiophen-2-yl)-[1,2,5]thiadiazolo[3,4-c]pyridine}-3,3′-di-2-ethylhexylsilylene-2,2′-bithiophene (6) as the donor and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as the acceptor component showed short circuit currents above −10 mA cm−2 and power conversion efficiencies (PCEs) over 3%. Thermal processing is a critical factor in obtaining favorable active layer morphologies and high PCE values. A combination of UV-visible spectroscopy, conductive and photo-conductive atomic force microscopies, dynamic secondary mass ion spectrometry (DSIMS), and grazing incident wide angle X-ray scattering (GIWAXS) experiments were carried out to characterize how thermal treatment influences the active layer structure and organization.

Relationships between Lead Halide Perovskite Thin-Film Fabrication, Morphology, and Performance in Solar Cells

Solution-processed lead halide perovskite thin-film solar cells have achieved power conversion efficiencies comparable to those obtained with several commercial photovoltaic technologies in a remarkably short period of time. This rapid rise in device efficiency is largely the result of the development of fabrication protocols capable of producing continuous, smooth perovskite films with micrometer-sized grains. Further developments in film fabrication and morphological control are necessary, however, in order for perovskite solar cells to reliably and reproducibly approach their thermodynamic efficiency limit. This Perspective discusses the fabrication of lead halide perovskite thin films, while highlighting the processing-property-performance relationships that have emerged from the literature, and from this knowledge, suggests future research directions.

Effects of Stereoisomerism on the Crystallization Behavior and Optoelectrical Properties of Conjugated Molecules

Three stereoisomers of DPP(TBFu)2 are separated and identified to investigate the effects of stereoisomerism on crystal structures and the optoelectrical properties. The crystal structures and FET mobility are sensitive to stereoisomers, in which the mesomer possesses the highest carrier mobility and the greatest crystallization tendency to dominate the crystallization in spin-cast films of the as-synthesized stereoisomeric mixture.

Topological Considerations for the Design of Molecular Donors with Multiple Absorbing Units

The molecule AT1, with two weakly conjugated chromophores, was designed, synthesized, and examined within the context of its film forming tendencies. While the addition of the second chromophore to the central core enables broadening of the absorption spectrum, this change is mostly apparent in films that are grown slowly. Grazing incidence X-ray scattering (GIWAXS) analysis indicates that these spectral characteristics correspond to an increase in solid state ordering. This information, in combination with differential scanning calorimetry, suggests that the overall molecular shape provides a kinetic barrier to crystallization. As a result, one finds the absence of molecular order when AT1 is combined with PC71BM in solution-cast blends. These findings highlight the importance of molecular topology when designing molecular components for solar cell devices.

Use of a commercially available nucleating agent to control the morphological development of solution-processed small molecule bulk heterojunction organic solar cells

The nucleating agent DMDBS is used to modulate the crystallization of solution-processed small molecule donor molecules in bulk heterojunction organic photovoltaic (BHJ OPV) devices. This control over donor molecule crystallization leads to a reduction in optimized thermal annealing times as well as smaller donor molecule crystallites, and therefore more efficient devices, when using an excessive amount of solvent additive. We therefore demonstrate the use of nucleating agents as a powerful and versatile processing strategy for solution-processed, small molecule BHJ OPVs.

Increased Mobility Induced by Addition of a Lewis Acid to a Lewis Basic Conjugated Polymer

Through simple addition of a Lewis acid to a conjugated polymer bearing a Lewis basic heteroatom, the hole transport of the polymer can be effectively p-doped resulting in a two-orders increase in hole mobility. The temperature dependent hole transport of a variety of Lewis acid concentrations are explored.