Alexander Yu. Fedotov

Bioceramics composed of octacalcium phosphate demonstrate enhanced biological behavior.

Bioceramics are used to treat bone defects but in general do not induce formation of new bone, which is essential for regeneration process. Many aspects related to bioceramics synthesis, properties and biological response that are still unknown and, there is a great need for further development. In the most recent research efforts were aimed on creation of materials from biological precursors of apatite formation in humans. One possible precursor is octacalcium phosphate (OCP), which is believed to not only exhibit osteoconductivity but possess osteoinductive quality, the ability to induce bone formation. Here we propose a relatively simple route for OCP ceramics preparation with a specifically designed microstructure. Comprehensive study for OCP ceramics including biodegradation, osteogenic properties in ortopic and heterotopic models and limited clinical trials were performed that demonstrated enhanced biological behavior. Our results provide a possible new concept for the clinical applications of OCP ceramics.

Octacalcium phosphate ceramics combined with gingiva-derived stromal cells for engineered functional bone grafts

Biocompatible ceramic fillers are capable of sustaining bone formation in the proper environment. The major drawback of these scaffolding materials is the absence of osteoinductivity. To overcome this limitation, bioengineered scaffolds combine osteoconductive components (biomaterials) with osteogenic features such as cells and growth factors. The bone marrow mesenchymal stromal cells (BMMSCs) and the β-tricalcium phosphate (β-TCP) are well-known and characterized in this regard. The present study was conducted to compare the properties of novel octacalcium phosphate ceramic (OCP) granules with β-TCP (Cerasorb(®)), gingiva-derived mesenchymal stromal cells (GMSCs) properties with the BMMSCs and osteogenic and angiogenic properties of a bioengineered composite based on OCP granules and the GMSCs. This study demonstrates that GMSCs and BMMSСs have a similar osteogenic capacity. The usage of OCP ceramic granules in combination with BMMSCs/GMSCs significantly affects the osteo- and angiogenesis in bone grafts of ectopic models.

Structural study of octacalcium phosphate bone cement conversion in vitro.

The nature of precursor phase during the biomineralization process of bone tissue formation is still controversial. Several phases were hypothesized, among them octacalcium phosphate. In this study, an in situ monitoring of structural changes, taking place upon the octacalcium phosphate bone cement hardening, was carried out in the presence of biopolymer chitosan and simulated body fluid (SBF). Several systems with different combinations of components were studied. The energy dispersive X-ray diffraction was applied to study the structural changes in real time, while morphological properties of the systems were investigated by the scanning electron microscopy. The obtained results evidence that final hydroxyapatite phase is formed only in the presence of chitosan and/or SBF, providing new insights into the in vivo biomineralization mechanism and, consequently, favoring the development of new approaches in biomaterials technology.

3D Printing of Octacalcium Phosphate Bone Substitutes

Biocompatible calcium phosphate ceramic grafts are able of supporting new bone formation in appropriate environment. The major limitation of these materials usage for medical implants is the absence of accessible methods for their patient-specific fabrication. 3D printing methodology is an excellent approach to overcome the limitation supporting effective and fast fabrication of individual complex bone substitutes. Here, we proposed a relatively simple route for 3D printing of octacalcium phosphates (OCP) in complexly shaped structures by the combination of inkjet printing with post-treatment methodology. The printed OCP blocks were further implanted in the developed cranial bone defect followed by histological evaluation. The obtained result confirmed the potential of the developed OCP bone substitutes, which allowed 2.5-time reducing of defect’s diameter at 6.5 months in a region where native bone repair is extremely inefficient.

3D printing of mineral–polymer bone substitutes based on sodium alginate and calcium phosphate

We demonstrate a relatively simple route for three-dimensional (3D) printing of complex-shaped biocompatible structures based on sodium alginate and calcium phosphate (CP) for bone tissue engineering. The fabrication of 3D composite structures was performed through the synthesis of inorganic particles within a biopolymer macromolecular network during 3D printing process. The formation of a new CP phase was studied through X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. Both the phase composition and the diameter of the CP particles depend on the concentration of a liquid component (i.e., the “ink”). The 3D printed structures were fabricated and found to have large interconnected porous systems (mean diameter ≈800 μm) and were found to possess compressive strengths from 0.45 to 1.0 MPa. This new approach can be effectively applied for fabrication of biocompatible scaffolds for bone tissue engineering constructions.

Silver-Doped Calcium Phosphate Bone Cements with Antibacterial Properties.

Calcium phosphate bone cements (CPCs) with antibacterial properties are demanded for clinical applications. In this study, we demonstrated the use of a relatively simple processing route based on preparation of silver-doped CPCs (CPCs-Ag) through the preparation of solid dispersed active powder phase. Real-time monitoring of structural transformations and kinetics of several CPCs-Ag formulations (Ag = 0 wt %, 0.6 wt % and 1.0 wt %) was performed by the Energy Dispersive X-ray Diffraction technique. The partial conversion of β-tricalcium phosphate (TCP) phase into the dicalcium phosphate dihydrate (DCPD) took place in all the investigated cement systems. In the pristine cement powders, Ag in its metallic form was found, whereas for CPC-Ag 0.6 wt % and CPC-Ag 1.0 wt % cements, CaAg(PO3)3 was detected and Ag (met.) was no longer present. The CPC-Ag 0 wt % cement exhibited a compressive strength of 6.5 ± 1.0 MPa, whereas for the doped cements (CPC-Ag 0.6 wt % and CPC-Ag 1.0 wt %) the reduced values of the compressive strength 4.0 ± 1.0 and 1.5 ± 1.0 MPa, respectively, were detected. Silver-ion release from CPC-Ag 0.6 wt % and CPC-Ag 1.0 wt % cements, measured by the Atomic Emission Spectroscopy, corresponds to the average values of 25 µg/L and 43 µg/L, respectively, rising a plateau after 15 days. The results of the antibacterial test proved the inhibitory effect towards pathogenic Escherichia coli for both CPC-Ag 0.6 wt % and CPC-Ag 1.0 wt % cements, better performances being observed for the cement with a higher Ag-content.

Fibrinogen-modified sodium alginate as a scaffold material for skin tissue engineering

In search for a new pro-angiogenic scaffold material suitable for skin bioengineering and grafting therapy, we have fabricated a number of composite sodium alginate (AG)-fibrinogen (FG) sponge scaffolds using the freeze-drying approach. Thrombin was added to drive FG/fibrin conversion, while ε-aminocapronic acid (εAc) was used as antifibrinolytic component. The slow rates of scaffold biodegradation were achieved by using Ca2+ and Mg2+ cations as cross-linking agents. The novel thrombin-modified AG-FG scaffolds with highly interconnected porous structure were evaluated using scanning electron microscopy, tensile testing and pycnometric analysis. The scaffolds were characterized by high porosity and tensile strength, possessing average pore size from about 60 to 300 μm depending on AG/FG ratio and fibrin stabilization. The biocompatibility of thrombin-modified scaffolds with a different AG/FG ratio was tested on human cells with potential applicability to skin tissue engineering: immortalized epidermal keratinocytes (N-TERT), primary skin fibroblasts, endothelial cells (HUVEC) and subcutaneous adipose-derived stromal cells. The scaffolds with low (15%) FG content have shown the highest adhesiveness and survival rates for all types of cells, as compared to the scaffolds with higher FG content. In unstabilized scaffolds, the addition of FG did not stimulate the aortic ring sprouting. At the same time, fibrin stabilization by εAc resulted in significant increase of aortic ring sprouting and more efficient formation of microvascular network. Altogether, obtained results suggest that thrombin-modified alginate sponges can be successfully used as a grafting material by itself to promote skin healing and regeneration and also as a scaffold for three-dimensional bioequivalent construction.