Alexandr V. Talyzin

Synthesis of graphene nanoribbons encapsulated in single-walled carbon nanotubes.

A novel material, graphene nanoribbons encapsulated in single-walled carbon nanotubes (GNR@SWNT), was synthesized using confined polymerization and fusion of polycyclic aromatic hydrocarbon (PAH) molecules. Formation of the GNR is possible due to confinement effects provided by the one-dimensional space inside nanotubes, which helps to align coronene or perylene molecules edge to edge to achieve dimerization and oligomerization of the molecules into long nanoribbons. Almost 100% filling of SWNT with GNR is achieved while nanoribbon length is limited only by the length of the encapsulating nanotube. The PAH fusion reaction provides a very simple and easily scalable method to synthesize GNR@SWNT in macroscopic amounts. First-principle simulations indicate that encapsulation of the GNRs is energetically favorable and that the electronic structure of the encapsulated GNRs is the same as for the free-standing ones, pointing to possible applications of the GNR@SWNT structures in photonics and nanoelectronics.

Hydrogenation, purification, and unzipping of carbon nanotubes by reaction with molecular hydrogen: road to graphane nanoribbons.

Reaction of single-walled carbon nanotubes (SWNTs) with hydrogen gas was studied in a temperature interval of 400-550 °C and at hydrogen pressure of 50 bar. Hydrogenation of nanotubes was observed for samples treated at 400-450 °C with about 1/3 of carbon atoms forming covalent C-H bonds, whereas hydrogen treatment at higher temperatures (550 °C) occurs as an etching. Unzipping of some SWNTs into graphene nanoribbons is observed as a result of hydrogenation at 400-550 °C. Annealing in hydrogen gas at elevated conditions for prolonged periods of time (72 h) is demonstrated to result also in nanotube opening, purification of nanotubes from amorphous carbon, and removal of carbon coatings from Fe catalyst particles, which allows their complete elimination by acid treatment.

Hydration of bilayered graphene oxide.

The hydration of graphene oxide (GO) membranes is the key to understand their remarkable selectivity in permeation of water molecules and humidity-dependent gas separation. We investigated the hydration of single GO layers as a function of humidity using scanning force microscopy, and we determined the single interlayer distance from the step height of a single GO layer on top of one or two GO layers. This interlayer distance grows gradually by approximately 1 Å upon a relative humidity (RH) increase in the range of 2 to ∼80%, and the immersion into liquid water increases the interlayer distance further by another 3 Å. The gradual expansion of the single interlayer distance is in good agreement with the averaged distance measured by X-ray diffraction on multilayered graphite oxides, which is commonly explained with an interstratification model. However, our experimental design excludes effects connected to interstratification. Instead we determine directly if insertion of water into GO occurs strictly by monolayers or the thickness of GO layers changes gradually. We find that hydration with up to 80% RH is a continuous process of incorporation of water molecules into single GO layers, while liquid water inserts as monolayers. The similarity of hydration for our bilayer and previously reported multilayered materials implies GO few and even bilayers to be suitable for selective water transport.

Pressure-induced insertion of liquid alcohols into graphite oxide structure.

Graphite oxide (GO) immersed in an excess of methanol and ethanol media is found to undergo a phase transformation at about 0.2-0.8 GPa, with an expansion of the unit cell volume by approximately 40%, due to pressure-induced insertion of solvent into interlayer space. The pressure at which the structural expansion occurs does not correlate with the solidification pressure of the alcohol, in contrast to the graphite oxide/water system. The expanded high-pressure phase of GO/ethanol could be quenched back to ambient pressure. Compression of graphite oxide with a 2:1 water/methanol medium revealed a complex anomaly with two steps attributed to insertion of methanol and water at different pressure points.

Optical Properties of Graphene Nanoribbons Encapsulated in Single-Walled Carbon Nanotubes

We report the photoluminescence (PL) from graphene nanoribbons (GNRs) encapsulated in single-walled carbon nanotubes (SWCNTs). New PL spectral features originating from GNRs have been detected in the visible spectral range. PL peaks from GNRs have resonant character, and their positions depend on the ribbon geometrical structure in accordance with the theoretical predictions. GNRs were synthesized using confined polymerization and fusion of coronene molecules. GNR@SWCNTs material demonstrates a bright photoluminescence both in infrared (IR) and visible regions. The photoluminescence excitation mapping in the near-IR spectral range has revealed the geometry-dependent shifts of the SWCNT peaks (up to 11 meV in excitation and emission) after the process of polymerization of coronene molecules inside the nanotubes. This behavior has been attributed to the strain of SWCNTs induced by insertion of the coronene molecules.

Graphene-based technologies for energy applications, challenges and perspectives

Here we report on technology developments implemented into the Graphene Flagship European project for the integration of graphene and graphene-related materials (GRMs) into energy application devices. Many of the technologies investigated so far aim at producing composite materials associating graphene or GRMs with either metal or semiconducting nanocrystals or other carbon nanostructures (e.g., CNT, graphite). These composites can be used favourably as hydrogen storage materials or solar cell absorbers. They can also provide better performing electrodes for fuel cells, batteries, or supercapacitors. For photovoltaic (PV) electrodes, where thin layers and interface engineering are required, surface technologies are preferred. We are using conventional vacuum processes to integrate graphene as well as radically new approaches based on laser irradiation strategies. For each application, the potential of implemented technologies is then presented on the basis of selected experimental and modelling results. It is shown in particular how some of these technologies can maximize the benefit taken from GRM integration. The technical challenges still to be addressed are highlighted and perspectives derived from the running works emphasized.

Phase Transitions in Graphite Oxide Solvates at Temperatures Near Ambient

It is demonstrated that solvent-saturated graphite oxide can be considered to be solid solvate, and two phases with distinctly different solvent composition are found near room temperature. Phase transitions between these two solvated phases were observed using synchrotron powder X-ray diffraction and DSC for methanol, ethanol, acetone, and dimethylformamide (DMF) solvents. Solvate A, formed at room temperature, undergoes a reversible phase transition into expanded Solvate L at temperatures slightly below ambient due to insertion of one monolayer of solvent molecules between the GO planes. The phase transition is reversible upon heating, whereas the low-temperature expanded phase L can be quenched to room temperature for ethanol and DMF solvates.

Hydrogen storage in high surface area graphene scaffolds

Using an optimized KOH activation procedure we prepared highly porous graphene scaffold materials with SSA values up to 3400 m(2) g(-1) and a pore volume up to 2.2 cm(3) g(-1), which are among the highest for carbon materials. Hydrogen uptake of activated graphene samples was evaluated in a broad temperature interval (77-296 K). After additional activation by hydrogen annealing the maximal excess H2 uptake of 7.5 wt% was obtained at 77 K. A hydrogen storage value as high as 4 wt% was observed already at 193 K (120 bar H2), a temperature of solid CO2, which can be easily maintained using common industrial refrigeration methods.

Structure of graphene oxide membranes in solvents and solutions

The change of distance between individual graphene oxide sheets due to swelling is the key parameter to explain and predict permeation of multilayered graphene oxide (GO) membranes by various solvents and solutions. In situ synchrotron X-ray diffraction study shows that swelling properties of GO membranes are distinctly different compared to precursor graphite oxide powder samples. Intercalation of liquid dioxolane, acetonitrile, acetone, and chloroform into the GO membrane structure occurs with maximum one monolayer insertion (Type I), in contrast with insertion of 2-3 layers of these solvents into the graphite oxide structure. However, the structure of GO membranes expands in liquid DMSO and DMF solvents similarly to precursor graphite oxide (Type II). It can be expected that Type II solvents will permeate GO membranes significantly faster compared to Type I solvents. The membranes are found to be stable in aqueous solutions of acidic and neutral salts, but dissolve slowly in some basic solutions of certain concentrations, e.g. in NaOH, NaHCO3 and LiF. Some larger organic molecules, alkylamines and alkylammonium cations are found to intercalate and expand the lattice of GO membranes significantly, e.g. up to ∼35 Å in octadecylamine/methanol solution. Intercalation of solutes into the GO structure is one of the limiting factors for nano-filtration of certain molecules but it also allows modification of the inter-layer distance of GO membranes and tuning of their permeation properties. For example, GO membranes functionalized with alkylammonium cations are hydrophobized and they swell in non-polar solvents.

Synthesis and Structural Characterization of C70H38

Reference LSMB-ARTICLE-2008-007doi:10.1002/anie.200705450View record in Web of Science Record created on 2008-11-03, modified on 2017-05-12