Alexandra Shosheva

Structural comparison of the poplar plastocyanin isoforms PCa and PCb sheds new light on the role of the copper site geometry in interactions with redox partners in oxygenic photosynthesis.

Plastocyanin (PC) from poplar leaves is present in two isoforms, PCa and PCb, which differ in sequence by amino acid replacements at locations remote from the copper center and simultaneously act in the photosynthetic electron-transport chain. We describe ultra-high resolution structures of PCa and high-resolution structures of PCb, both under oxidizing and reducing conditions at pH 4, 6 and 8. The docking on cytochrome f and photosystem I, respectively, has been modeled for both isoforms. PCa and PCb exhibit closely similar overall and active-site structures, except for a difference in the relative orientation of the acidic patches. The isoforms exhibit substantial differences in the dependence of the reduced (Cu(I)) geometry on pH. In PCa, the decrease in pH causes a gradual dissociation of His87 from Cu(I) at low pH, probably adopting a neutral tautomeric state. In PCb, the histidine remains covalently bound to Cu(I) and may adopt a doubly protonated state at low pH. The fact that both isoforms have similar although not identical functions in photosynthetic electron flows suggests that the His87 imidazole does not play a crucial role for the pathway of electron transport from cytochrome f to oxidized PC.

pH-dependence of photo-induced electron transfer in zinc-substituted sperm whale myoglobin

The electron transfer between the excited triplet state of zinc-substituted sperm whale myoglobin and Cu2+ has been studied by following the decay rate of delayed fluorescence. The Cu2+ bound on the surface of the myoglobin molecule are efficient quenchers of the excited electron state of Zn-myoglobin. Two bimolecular rate constants of quenching (KQ) for every pH investigated have been calculated. The pH-dependence of KQ1 indicates that the protonation of one amino acid residue (His-GH1 (119] is important for the process. Our results support the idea of the common nature of the mechanism of quenching by Cu2+ and oxidation of oxymyoglobin by Cu2+.

ASSESSING THE QUALITY OF THE HOMOLOGY-MODELED 3D STRUCTURES FROM ELECTROSTATIC STANDPOINT: TEST ON BACTERIAL NUCLEOSIDE MONOPHOSPHATE KINASE FAMILIES

In this study, we address the issue of performing meaningful pK(a) calculations using homology modeled three-dimensional (3D) structures and analyze the possibility of using the calculated pK(a) values to detect structural defects in the models. For this purpose, the 3D structure of each member of five large protein families of a bacterial nucleoside monophosphate kinases (NMPK) have been modeled by means of homology-based approach. Further, we performed pK(a) calculations for the each model and for the template X-ray structures. Each bacterial NMPK family used in the study comprised on average 100 members providing a pool of sequences and 3D models large enough for reliable statistical analysis. It was shown that pK(a) values of titratable groups, which are highly conserved within a family, tend to be conserved among the models too. We demonstrated that homology modeled structures with sequence identity larger than 35% and gap percentile smaller than 10% can be used for meaningful pK(a) calculations. In addition, it was found that some highly conserved titratable groups either exhibit large pK(a) fluctuations among the models or have pK(a) values shifted by several pH units with respect to the pK(a) calculated for the X-ray structure. We demonstrated that such case usually indicates structural errors associated with the model. Thus, we argue that pK(a) calculations can be used for assessing the quality of the 3D models by monitoring fluctuations of the pK(a) values for highly conserved titratable residues within large sets of homologous proteins.

Crystallization and preliminary X-ray diffraction data of the complex between human centrin 2 and a peptide from the protein XPC

Centrins are highly conserved calcium-binding proteins involved in the nucleotide-excision repair pathway as a subunit of the heterotrimer including the XPC and hHR23B proteins. A complex formed by a Ca2+-bound human centrin 2 construct (the wild type lacking the first 25 amino acids) with a 17-mer peptide derived from the XPC sequence (residues Asn847-Arg863) was crystallized. Data were collected to 1.65 angstroms resolution from crystals grown in 30% monomethyl polyethylene glycol (MPEG) 500, 100 mM NaCl and 100 mM Bicine pH 9.0. Crystals are monoclinic and belong to space group C2, with two molecules in the asymmetric unit. The unit-cell parameters are a = 60.28, b = 59.42, c = 105.14 angstroms, alpha = gamma = 90, beta = 94.67 degrees. A heavy-atom derivative was obtained by co-crystallization with Sr2+. The substitution was rationalized by calorimetry experiments, which indicate a binding constant for Sr2+ of 4.0 x 10(4) M(-1).

pH-Dependent Quenching of the Fluorescence of Tryptophan Residues in Class A β-Lactamase from E. coli (TEM-1)

We performed an investigation of the pH-dependent quenching of the fluorescence of tryptophan residues of TEM-1 β-lactamase from E. coli by uncharged and charged quenchers. pH-dependent Stern-Volmer constants (KSV/pH) of tryptophan residues allowed us to determine subtle but discrete structurally and functionally important processes.

Some physicochemical peculiarities of poplar plastocyanins a and b.

The redox potentials of poplar plastocyanins a and b (PCa, PCb) were determined by spectro photometric titrations of their reduced forms with [Fe(CN)6]3-. It was found that the two isoforms have the following millimolar extinction coefficients ε597, equilibrium constants Keq of one-electron exchange with [Fe(CN)6]4-/[Fe(CN)6]3-, and standard electron potentials E0′: PCa: ε597 = (4.72 ± 0.08) mM-1 cm-1, Keq = 0.133 ± 0.009, E0′ = (354 ± 11) mV; PCb: ε597 = (5.23 ± 0.16) mM-1 cm-1, Keq = 0.175 ± 0.010, E0′ = (363 ± 12) mV. The pH dependence of the redox potential of PCb was studied too. It was found, that the value of E0′ for PCb is constant in the pH range 6.5 - 9.5, but decreases in the range 4.8 - 6.5. On the whole, the dependence resembles that of PC from some well-known plant species, including poplar PCa. The changes of E0′ in the pH-dependent region for poplar PCb, however, are smaller and are 13 mV per pH unit, whereas in the other well-known plant species the changes are about 50 - 60 mV per pH unit. It has been assumed that the weaker pH dependence of E0′ of PCb accounts for some structural differences between PCa and PCb

Physicochemical Characteristics of a Thermostable Gellan Lyase from Geobacillus stearothermophilus 98

A purified thermostable gellan lyase, produced by a thermophilic bacterium, Geobacillus stearothermophilus 98, was characterized in relation to its physicochemical properties. The gellan lyase was established to have a molecular weight of 216 kDa, defined by capillary gel electrophoresis. Amino acid analysis revealed high quantities of Lys, His, Ala, Val, Ile, Glx, and Pro residues. The circular dichroism revealed 45% β-structure and practically lack of α-spiral domains. Kinetic studies showed high affinity of the enzyme to gellan as a substrate (Km = 0.21 μM). The thermal denaturation investigated by cicular dichroism showed a highly cooperative transition with a midpoint (Tm) at about 75 °C. A single product was identified after enzyme action on gellan. Large exothermic aggregation near Tm was observed by differential scanning calorimetry. Two types of gellan lyase crystals were reproducibly isolated.

Isolation and identification of poplar isoplastocyanins.

An improved four-stage isolation and purification procedure for preparing poplar isoplastocyanins is described in detail. Absorbance (UV-VIS) spectroscopy and isoelectric focusing (IEF) are used to determine the protein purity and identity. The present procedure increases twice the total plastocyanin (PC) yield. Four PC isoform fractions are consecutively isolated at the third chromatographic step: oxidized PCa(II) and PCb(II) and reduced PCb(I) and PCa(I). PCa(II) and PCb(II) obtained at the fourth chromatographic step are highly purified PC isoforms which show the purity index (p.i.) A278/A597 ≤ 0.85. Isoelectric points (pI values) of the PC isoforms are found to be at pH 3.92 ± 0.04 for PCa and at pH 3.85 ± 0.02 for PCb. The results of appropriate biological experiments that include the highly purified poplar PC isoforms could give answers to the questions about the physiological significance of PC dimorphism for photosynthesis.

Urea unfolding and stability of gamma-II crystallin

The conformational stability of gamma-II crystallin at pH 7.0 was estimated by studying its urea denaturation at isothermal conditions. The conformational states were monitored by far UV-CD and fluorescence measurements. Gamma-II crystallin shows sigmoidal order-disorder transition curves by both methods. The presence of more than one intermediate was confirmed but at neutral pH. The experiment results were critically analyzed in terms of both linear extrapolation and Tanfords models. The Gibbs free energy of unfolding delta G u,H2O = -36 kcal mol-1 was obtained. This value corresponds to the high conformational stability of the protein predicted qualitatively by its crystal structure.