Ali Alsalme

Enhanced Photocatalytic Performance of the Graphene-V2O5 Nanocomposite in the Degradation of Methylene Blue Dye under Direct Sunlight

A simple and efficient solution mixing method has been developed for the synthesis of the G-V2O5 nanocomposite. By this method, one-dimensional V2O5 rods are decorated onto the two-dimensional graphene sheets. The synthesized nanocomposites are characterized by XRD, SEM with elemental mapping, TEM, FT-IR, Raman, BET, and XPS analyses. The photocatalytic activity of the G-V2O5 nanocomposite studied with methylene blue dye shows strong degradation efficiency with direct sunlight irradiation compared to UV and visible light sources. The mechanism of methylene blue dye degradation by the G-V2O5 nanocomposite has been elucidated through the kinetics of the degradation process by calculating the rate constant and half-life time of the degradation process.

Glycerol utilization: solvent-free acetalisation over niobia catalysts

With increasing biodiesel production, availability of glycerol is expected to increase. New processes are needed for converting this surplus glycerol to value-added chemicals. In this work, we used niobia catalysts for the liquid-phase acetalisation of glycerol without using any solvent. High conversions were achieved (∼80%), though water was present in the reaction system. The calcination temperature changed the strength as well as the nature of acidity of the samples. Samples with higher Bronsted acid strength exhibited higher catalytic performance. The results show that niobia is a water tolerant, reusable catalyst for glycerol acetalisation.

Designing CuOx Nanoparticle-Decorated CeO2 Nanocubes for Catalytic Soot Oxidation: Role of the Nanointerface in the Catalytic Performance of Heterostructured Nanomaterials

This work investigates the structure-activity properties of CuOx-decorated CeO2 nanocubes with a meticulous scrutiny on the role of the CuOx/CeO2 nanointerface in the catalytic oxidation of diesel soot, a critical environmental problem all over the world. For this, a systematic characterization of the materials has been undertaken using transmission electron microscopy (TEM), transmission electron microscopy-energy-dispersive X-ray spectroscopy (TEM-EDS), high-angle annular dark-field-scanning transmission electron microscopy (HAADF-STEM), scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS), X-ray diffraction (XRD), Raman, N2 adsorption-desorption, and X-ray photoelectron spectroscopy (XPS) techniques. The TEM images show the formation of nanosized CeO2 cubes (∼25 nm) and CuOx nanoparticles (∼8.5 nm). The TEM-EDS elemental mapping images reveal the uniform decoration of CuOx nanoparticles on CeO2 nanocubes. The XPS and Raman studies show that the decoration of CuOx on CeO2 nanocubes leads to improved structural defects, such as higher concentrations of Ce(3+) ions and abundant oxygen vacancies. It was found that CuOx-decorated CeO2 nanocubes efficiently catalyze soot oxidation at a much lower temperature (T50 = 646 K, temperature at which 50% soot conversion is achieved) compared to that of pristine CeO2 nanocubes (T50 = 725 K) under tight contact conditions. Similarly, a huge 91 K difference in the T50 values of CuOx/CeO2 (T50 = 744 K) and pristine CeO2 (T50 = 835 K) was found in the loose-contact soot oxidation studies. The superior catalytic performance of CuOx-decorated CeO2 nanocubes is mainly attributed to the improved redox efficiency of CeO2 at the nanointerface sites of CuOx-CeO2, as evidenced by Ce M5,4 EELS analysis, supported by XRD, Raman, and XPS studies, a clear proof for the role of nanointerfaces in the performance of heterostructured nanocatalysts.

Mixed-linker strategy for the construction of multifunctional metal–organic frameworks

Owing to their permanent porosity, tunability and multifunctionalization, metal–organic framework (MOF) materials have captured widespread interest in various fields, including gas storage and separation, catalysis, and energy storage. However, precise control over the composition, structure and properties of MOF materials remains a generally elusive but worthwhile dream. The stepwise assembly of porous crystalline MOF materials provides possibility to access this goal. In this review, we focus on four kinds of mixed-linker MOFs, (i) pillared-layer mixed-linker MOFs, (ii) cage-directed mixed-linker MOFs, (iii) cluster-based mixed-linker MOFs, and (iv) structure templated mixed-linker MOFs. The achieved progress and existing problems are discussed, and the opportunities and challenges of mixed-linker MOFs and their related applications are anticipated.

Construction of hierarchically porous metal–organic frameworks through linker labilization

A major goal of metal–organic framework (MOF) research is the expansion of pore size and volume. Although many approaches have been attempted to increase the pore size of MOF materials, it is still a challenge to construct MOFs with precisely customized pore apertures for specific applications. Herein, we present a new method, namely linker labilization, to increase the MOF porosity and pore size, giving rise to hierarchical-pore architectures. Microporous MOFs with robust metal nodes and pro-labile linkers were initially synthesized. The mesopores were subsequently created as crystal defects through the splitting of a pro-labile-linker and the removal of the linker fragments by acid treatment. We demonstrate that linker labilization method can create controllable hierarchical porous structures in stable MOFs, which facilitates the diffusion and adsorption process of guest molecules to improve the performances of MOFs in adsorption and catalysis.

Biogenic synthesis of Zinc oxide nanostructures from Nigella sativa seed: Prospective role as food packaging material inhibiting broad-spectrum quorum sensing and biofilm

Bacterial spoilage of food products is regulated by density dependent communication system called quorum sensing (QS). QS control biofilm formation in numerous food pathogens and Biofilms formed on food surfaces act as carriers of bacterial contamination leading to spoilage of food and health hazards. Agents inhibiting or interfering with bacterial QS and biofilm are gaining importance as a novel class of next-generation food preservatives/packaging material. In the present study, Zinc nanostructures were synthesised using Nigella sativa seed extract (NS-ZnNPs). Synthesized nanostructures were characterized hexagonal wurtzite structure of size ~24 nm by UV-visible, XRD, FTIR and TEM. NS-ZnNPs demonstrated broad-spectrum QS inhibition in C. violaceum and P. aeruginosa biosensor strains. Synthesized nanostructures inhibited QS regulated functions of C. violaceum CVO26 (violacein) and elastase, protease, pyocyanin and alginate production in PAO1 significantly. NS-ZnNPs at sub-inhibitory concentrations inhibited the biofilm formation of four-food pathogens viz. C. violaceum 12472, PAO1, L. monocytogenes, E. coli. Moreover, NS-ZnNPs was found effective in inhibiting pre-formed mature biofilms of the four pathogens. Therefore, the broad-spectrum inhibition of QS and biofilm by biogenic Zinc oxide nanoparticles and it is envisaged that these nontoxic bioactive nanostructures can be used as food packaging material and/or as food preservative.

Light-stable bis(norharmane)silver(I) compounds: Synthesis, characterization and antiproliferative effects in cancer cells

Four different-anion Ag(I) compounds with the ligand norharmane (9H-Pyrido[3,4-b]indole; Hnor) and having the general formula [Ag(Hnor)2](anion) (anion=ClO4(-), NO3(-) and BF4(-)) [Ag(Hnor)2(MeCN)](PF6) are reported, and studied in detail regarding their coordination mode and in vitro antiproliferative effects. X-ray structural analysis revealed that the complex with the PF6(-) anion has a MeCN solvent molecule weakly coordinated to Ag(I), making the metal coordination T-shaped, while the other compounds present the classical linear Ag(I) coordination. The compounds showed certain cell growth inhibitory effects in two different cancer cell lines, with the perchlorate containing complex being the most toxic and in fact comparable to cisplatin. Notably, the compounds are stable in visible light; and the luminescence in the solid state was found to be extremely weak, whereas in MeOH solution all compounds show a moderate to weak emission band at 375 nm, when excited at 290 nm.

In-situ microwave synthesis of graphene-TiO2 nanocomposites with enhanced photocatalytic properties for the degradation of organic pollutants.

Graphene-titanium oxide (G-TiO2) nanocomposites were synthesized by a novel surfactant free, environmentally friendly one-port in-situ microwave method. The structure of the nanocomposite was characterized by the X-ray diffraction analysis and the morphology by using scanning electron microscopic and transmission electron microscopic images. The functional groups and carbon band structures were identified using FTIR and Raman spectral analysis. TiO2 nanoparticles in the size range of 5-10nm were distributed on the graphene sheets. The surface area of pure TiO2 and G-TiO2 nanocomposite was measured to be 20.11 and 173.76m(2)/g respectively. The pore volume and pore size of TiO2 were 0.018cm(3)/g and 1.5266nm respectively. G-TiO2 composite possesses higher pore volume (0.259cm(3)/g) and pore size 3.2075nm. The binding states of C, O and Ti of nanocomposite were analyzed by X-ray photoelectron spectroscopy, which confirmed the chemical bonding between graphene-TiO2. The photocatalytic activity of pure TiO2 and G-TiO2 nanocomposite was studied under UV and visible light irradiation sources with methylene blue dye. It has been observed that the degradation was faster in G-TiO2 nanocomposite than pure TiO2 nanoparticles. The rate constant and half life time were calculated from the kinetic studies of the degradation. The highest degradation efficiency of 97% was achieved in UV light and 96% for visible light irradiation with G-TiO2 as a catalyst. The studies reveal that G-TiO2 nanocomposite can be an effective catalyst for industrial waste water treatment.

Simpler and highly sensitive enzyme-free sensing of urea via NiO nanostructures modified electrode

In this study, NiO nanostructures were synthesized via a hydrothermal process using ascorbic acid as doping agent in the presence of ammonia. As prepared nanostructures were characterized using Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Brunauer–Emmett–Teller (BET) specific surface area analysis, and thermogravimetric analysis (TGA). These analyses showed that these nanostructures are in the form of cotton-like porous material and crystalline in nature. Furthermore, the average size of these NiO crystallites was estimated to be 3.8 nm. These nanostructures were investigated for their potential to be a highly sensitive and selective enzyme-free sensor for detection of urea after immobilizing on a glassy carbon electrode (GCE) using 0.1% Nafion as binder. The response of this as developed amperometric sensor was linear in the range of 100–1100 μM urea with a R2 value of 0.990 and limit of detection (LOD) of 10 μM. The sensor responded negligibly to various interfering species including glucose, uric acid, and ascorbic acid. This sensor was applied successfully for determining urea in real water samples such as mineral water, tap water, and river water with acceptable recovery.

Insights into the strong in-vitro anticancer effects for bis(triphenylphosphane)iminium compounds having perchlorate, tetrafluoridoborate and bis(chlorido)argentate anions

Three new compounds containing the bis(triphenylphosphane)iminium cation (PPN(+)) with ClO4(-), BF4(-) and [AgCl2](-) as counter anions have been synthesized and structurally characterized. The two derivatives with ClO4(-) and BF4(-) were found to be isostructural by single crystal X-ray diffraction. Interestingly, the three compounds show extremely potent antiproliferative effects against the human cancer cell line SKOV3. To gain insights into the possible mechanisms of biological action, several intracellular targets have been considered. Thus, DNA binding has been evaluated, as well as the effects of the compounds on the mitochondrial function. Furthermore, the compounds have been tested as possible inhibitors of the seleno-enzyme thioredoxin reductase.