Ali Derazshamshir

Molecularly imprinted composite cryogels for hemoglobin depletion from human blood

A molecularly imprinted composite cryogel (MICC) was prepared for depletion of hemoglobin from human blood prior to use in proteome applications. Poly(hydroxyethyl methacrylate) based MICC was prepared with high gel fraction yields up to 90%, and characterized by Fourier transform infrared spectrophotometer, scanning electron microscopy, swelling studies, flow dynamics and surface area measurements. MICC exhibited a high binding capacity and selectivity for hemoglobin in the presence of immunoglobulin G, albumin and myoglobin. MICC column was successfully applied in fast protein liquid chromatography system for selective depletion of hemoglobin for human blood. The depletion ratio was highly increased by embedding microspheres into the cryogel (93.2%). Finally, MICC can be reused many times with no apparent decrease in hemoglobin adsorption capacity. Copyright

Synthesis and characterization of amino acid containing Cu(II) chelated nanoparticles for lysozyme adsorption.

Immobilized metal ion affinity chromatography (IMAC) is a useful method for adsorption of proteins that have an affinity for transition metal ions. In this study, poly(hydroxyethyl methacrylate-methacryloyl-L-tryptophan) (PHEMATrp) nanoparticles were prepared by surfactant free emulsion polymerization. Then, Cu(II) ions were chelated on the PHEMATrp nanoparticles to be used in lysozyme adsorption studies in batch system. The maximum lysozyme adsorption capacity of the PHEMATrp nanoparticles was found to be 326.9 mg/g polymer at pH 7.0. The nonspecific lysozyme adsorption onto the PHEMA nanoparticles was negligible. In terms of protein desorption, it was observed that adsorbed lysozyme was readily desorbed in medium containing 1.0 M NaCl. The results showed that the metal-chelated PHEMATrp nanoparticles can be considered as a good adsorbent for lysozyme purification.

Molecular Imprinting of Macromolecules for Sensor Applications

Molecular recognition has an important role in numerous living systems. One of the most important molecular recognition methods is molecular imprinting, which allows host compounds to recognize and detect several molecules rapidly, sensitively and selectively. Compared to natural systems, molecular imprinting methods have some important features such as low cost, robustness, high recognition ability and long term durability which allows molecularly imprinted polymers to be used in various biotechnological applications, such as chromatography, drug delivery, nanotechnology, and sensor technology. Sensors are important tools because of their ability to figure out a potentially large number of analytical difficulties in various areas with different macromolecular targets. Proteins, enzymes, nucleic acids, antibodies, viruses and cells are defined as macromolecules that have wide range of functions are very important. Thus, macromolecules detection has gained great attention in concerning the improvement in most of the studies. The applications of macromolecule imprinted sensors will have a spacious exploration according to the low cost, high specificity and stability. In this review, macromolecules for molecularly imprinted sensor applications are structured according to the definition of molecular imprinting methods, developments in macromolecular imprinting methods, macromolecular imprinted sensors, and conclusions and future perspectives. This chapter follows the latter strategies and focuses on the applications of macromolecular imprinted sensors. This allows discussion on how sensor strategy is brought to solve the macromolecules imprinting.

[PHEMA/PEI]-Cu(II) based immobilized metal affinity chromatography cryogels: Application on the separation of IgG from human plasma.

The immobilized metal-affinity chromatography (IMAC) has gained significant interest as a widespread separation and purification tool for therapeutic proteins, nucleic acids and other biological molecules. The enormous potential of IMAC for proteins with natural surface exposed-histidine residues and for recombinant proteins with histidine clusters. Cryogels as monolithic materials have recently been proposed as promising chromatographic adsorbents for the separation of biomolecules in downstream processing. In the present study, IMAC cryogels have been synthesized and utilized for the adsorption and separation of immunoglobulin G (IgG) from IgG solution and whole human plasma. For this purpose, Cu(II)-ions were coupled to poly(hydroxyethyl methacrylate) PHEMA using poly(ethylene imine) (PEI) as the chelating ligand. In this study the cryogels formation optimized by the varied proportion of PEI from 1% to 15% along with different amounts of Cu (II) as chelating metal. The prepared cryogels were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The [PHEMA/PEI]-Cu(II) cryogels were assayed for their capability to bind the human IgG from aqueous solutions. The IMAC cryogels were found to have high affinity toward human IgG. The adsorption of human IgG was investigated onto the PHEMA/PEI cryogels with (10% PEI) and the concentration of Cu (II) varied as 10, 50, 100 and 150 mg/L. The separation of human IgG was achieved in one purification step at pH7.4. The maximum adsorption capacity was observed at the [PHEMA/PEI]-Cu(II) (10% PEI) with 72.28 mg/g of human IgG. The purification efficiency and human IgG purity were investigated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE).

Molecularly imprinted hydrophobic polymers as a tool for separation in capillary electrochromatography

The use of molecular imprinted polymers (MIPs), which provides a means for preparing stationary phases with predetermined selectivity for a target molecule in capillary electrochromatography (CEC), is attractive because it combines selectivity, higher separation efficiency and shorter analysis time. A bisphenol A (BPA)-imprinted monolithic capillary BPA/PMAPA column was synthesized for the selective separation of bisphenol A (BPA) from aqueous solutions containing the competitor molecule phenol (PH), which is similar in size and shape to the template molecule. BPA-imprinted monolithic column was prepared in the presence of the template molecule, BPA, which results in the formation of recognition cavities complementary to the template molecule, after the removal of template molecule. An amino acid based monomer, N-methacryloyl-L-phenyl alanine (MAPA), was used as the functional monomer. The new stationary phase contains both charged and hydrophobic groups originating from MAPA monomer, which behaves as both an electroosmotic flow (EOF) supplier and a hydrophobic matrix. The MAPA containing BPA imprinted column behaves as a mixed mode stationary phase, as ion exchanger and hydrophobic matrix depending on the pH of the medium. Scanning electron microscopy was used to identify the structural features of the molecular imprinted column. MIP column performance was evaluated by the electrochromatographic separation of alkylbenzenes. The novelty of this work originated from dual separation mechanism shown by MAPA, which has the ability to form both hydrophobic and electrostatic interactions by the charged and hydrophobic groups of phenylalanine amino acid. This new column with mixed-mode characteristics was then used successfully as the stationary phase in CEC for the selective separation of BPA in MIP systems.

Surface plasmon resonance sensors for real-time detection of cyclic citrullinated peptide antibodies

ABSTRACT Surface plasmon resonance (SPR) sensors have been used for detection of various biomolecules because of their simplicity, high specificity and sensitivity, real-time detection, low cost, and no requirement of labeling. Recently, molecularly imprinted polymers that are easy to prepare, less expensive, stable, have talent for molecular recognition and also are used for creation selective binding sites for target molecule on the SPR sensors. Here, we show that preparation of cyclic citrullinated peptide antibody (anti-CCP) imprinted SPR sensor to detect CCP antibodies. For this purpose, anti-CCP/AAm pre-complex was synthesized by interacting acrylamide (AAm) monomer with anti-CCP. Then, anti-CCP imprinted (anti-CCP/PAAm) SPR sensor was obtained by reacting with anti-CCP/AAm pre-complex in the presence of the crosslinker, and initiator/activator pair. Besides this, non-imprinted (PAAm) SPR sensor was also prepared without using anti-CCP template. The SPR sensors were characterized and then adsorption-desorption studies were performed with pH 7.0 phosphate buffer (10 mM) and acetic acid (10%) with Tween 20 (1%) in pH 7.0 phosphate buffer. Selectivitiy of sensors was investigated by using immunoglobulin M (IgM) and bovine serum albumin (BSA). To determine the adsorption model of interactions between anti-CCP solutions and anti-CCP/PAAm SPR sensor, different adsorption models were performed. The calculated maximum reflection, detection limit, association and dissociation constants were 1.079 RU/mL, 0.177 RU/mL, 0.589 RU/mL and 1.697 mL/RU, respectively. Repeatability experiments of anti-CCP/PAAm SPR sensor was performed four times with adsorption-desorption-regeneration cycles without any performance losing. Results showed that anti-CCP/PAAm SPR sensor had high selectivity and sensitivity for detection of CCP antibodies.

Preparation of cryogel columns for depletion of hemoglobin from human blood

Abstract In this study, we aimed to prepare the metal chelate affinity cryogels for the hemoglobin (Hb) depletion. Poly(2-hydroxyethyl methacrylate) (PHEMA) cryogels were selected as base matrix because of their blood compatibility, osmotic, chemical, and mechanical stability. Cryogels are also useful when working with the viscous samples such as blood, because of their interconnected macroporous structure. Iminodiacetic acid (IDA), the chelating agent, was covalently coupled with PHEMA cryogels after activation with the epichlorohydrin and then the Ni(II) ions were chelated to the IDA-bound cryogels. The depletion of the Hb from hemolysate was shown by SDS-PAGE.

Triazine herbicide imprinted monolithic column for capillary electrochromatography

Trietazine was selectively separated from aqueous solution containing the competitor molecule cyanazine, which is similar in size and shape to the template molecule. Structural features of the molecularly imprinted column were figured out by SEM. The influence of the mobile‐phase composition, applied electrical field, and pH of the mobile phase on the recognition of trietazine by the imprinted monolithic polymer has been evaluated, and the imprint effect in the trietazine‐imprinted monolithic polymer was demonstrated by an imprinting factor. The optimized monolithic column resulted in separation of trietazine from a structurally related competitor molecule, cyanazine. In addition, fast separation was obtained within 6 min by applying higher electrical field, with the electrophoretic mobility of 2.97 × 10−8 m2V−1s−1 at pH 11.0.

Synthesis of hydrophobic nanoparticles for real-time lysozyme detection using surface plasmon resonance sensor

Diagnostic biomarkers such as proteins and enzymes are generally hard to detect because of the low abundance in biological fluids. To solve this problem, the advantages of surface plasmon resonance (SPR) and nanomaterial technologies have been combined. The SPR sensors are easy to prepare, no requirement of labelling and can be detected in real time. In addition, they have high specificity and sensitivity with low cost. The nanomaterials have also crucial functions such as efficiency improvement, selectivity, and sensitivity of the detection systems. In this report, an SPR‐based sensor is developed to detect lysozyme with hydrophobic poly (N‐methacryloyl‐(L)‐phenylalanine) (PMAPA) nanoparticles. The SPR sensor was first characterized by attenuated total reflection‐Fourier transform infrared, atomic force microscope, and water contact angle measurements and performed with aqueous lysozyme solutions. Various concentrations of lysozyme solution were used to calculate kinetic and affinity coefficients. The equilibrium and adsorption isotherm models of interactions between lysozyme solutions and SPR sensor were determined and the maximum reflection, association, and dissociation constants were calculated by Langmuir model as 4.87, 0.019 nM−1, and 54 nM, respectively. The selectivity studies of SPR sensor were investigated with competitive agents, hemoglobin, and myoglobin. Also, the SPR sensor was used four times in adsorption/desorption/recovery cycles and results showed that, the combination of optical SPR sensor with hydrophobic ionizable PMAPA nanoparticles in one mode enabled the detection of lysozyme molecule with high accuracy, good sensivity, real‐time, label‐free, and a low‐detection limit of 0.66 nM from lysozyme solutions. Lysozyme detection in a real sample was performed by using chicken egg white to evaluate interfering molecules present in the medium.

Poly(vinyl alcohol)/polyethyleneimine (PVA/PEI) blended monolithic cryogel columns for the depletion of haemoglobin from human blood

ABSTRACT We have synthesized PVA/PEI monolithic cryogel columns chelated with Cu2+ ions as a model adsorbent, which is capable of binding haemoglobin (Hb) from human blood. The goal of this study is to perform the depletion of Hb via a single and easy process to be useful in proteomic studies. PVA/PEI-Cu2+ cryogel columns were subjected to adsorption studies of Hb from both aqueous solution and human plasma to evaluate the extent of interaction between cryogel columns and Hb. The effects of experimental parameters, such as pH, Hb equilibrium concentration, adsorption time, temperature, and ionic strength, on Hb adsorption capacity were investigated.