Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Ali Güleç is active.

Publication


Featured researches published by Ali Güleç.


Journal of Hand Surgery (European Volume) | 2015

Clinical comparison of hook plate fixation versus extension block pinning for bony mallet finger: a retrospective comparison study.

Mehmet Ali Acar; Yunus Güzel; Ali Güleç; G. Uzer; M. Elmadağ

The aim of this retrospective study was to determine whether traumatic mallet fractures had better outcomes when treated by hook plate fixation (13 patients) or extension block pinning (19 patients). We assessed outcomes using Crawford’s criteria; distal interphalangeal joint range of motion; the DASH score; and a visual analogue scale score for pain. We measured radiological parameters. No significant differences were observed in functional and clinical outcomes and in complications. Whereas the operative time was longer in the hook plate group, intraoperative fluoroscopy use, time to bone union and time to return to work were greater in the extension block group. Although the hook plate method is more technically demanding, it provides good stable reduction, earlier mobilization and an earlier return to work. The extension block pinning technique is easier and as effective but it requires greater peri-operative fluoroscopy. Level of evidence: Level III


Injury-international Journal of The Care of The Injured | 2014

Reconstruction of multiple fingertip injuries with reverse flow homodigital flap

Mehmet Ali Acar; Yunus Güzel; Ali Güleç; Faik Türkmen; Omer Faruk Erkocak; Guney Yilmaz

AIM Hand trauma may lead to multiple fingertip defects, causing functional restrictions. We evaluated the use of reverse-flow homodigital flap reconstruction of the distal phalanx and pulp defects associated with multiple finger injuries. METHODS We retrospectively evaluated 11 male patients who presented at our emergency department (January 2011-March 2013) with multiple fingertip injuries and who were treated with a reverse-flow homodigital flap. Evaluations included age, sex, defect size, flap survival rate, complications, cold intolerance, two-point discrimination, range of motion (ROM), quick disabilities of the arm, shoulder, and hand (DASH) score, and return to work time. RESULTS Completely, 22 reverse-flow homodigital flaps were applied to at least two fingertip injuries at the distal phalanx. Ten flaps survived postoperatively. The exception was partial flap loss on one finger. The mean follow-up was 14.2 months. At the final follow-up, the mean static two-point discrimination value was 10.3mm. Mean ROMs of interphalangeal joints were 65.31° (distal) and 105.77° (proximal). Donor sites were covered with full-thickness skin grafts from the wrist or antecubital area. There were no complications related to the donor site and no development of cold intolerance in any finger. The mean quick DASH score was 4.12. All patients returned to work in an average of 8.3 weeks. CONCLUSIONS The reconstruction of multiple fingertip injuries with reverse-flow homodigital flaps is a safe, effective method that can be combined with other local finger flaps. These flaps can be applied to two consecutive fingers without reducing finger length or function.


Case reports in orthopedics | 2014

Isolated Fracture of the Coracoid Process

Ali Güleç; Harun Kütahya; Recep Gani Göncü; Serdar Toker

Coracoid fractures are rarely seen fractures. In the shoulder girdle, coracoid process fractures generally accompany dislocation of the acromioclavicular joint or glenohumeral joint, scapula corpus, clavicula, humerus fracture, or rotator cuff tear. Coracoid fractures can be missed and the treatment for coracoid process fractures is still controversial. In this paper, a 34-year-old male manual labourer presented to the emergency department with complaints of pain and restricted movement in the left shoulder following a traffic accident. On direct radiographs and computerised tomography images a fragmented fracture was observed on the base of the coracoid process. In addition to the coracoid fracture, a mandibular fracture was determined. The patient was admitted for surgery on both fractures. After open reduction, fixation was made with a 3.5 mm cannulated screw and washer. At the postoperative 6th week, bone union was determined. The patient returned to his previous occupation pain-free and with a full range of joint movement. In conclusion, in the current case of isolated fragmented coracoid process fracture showing minimal displacement in a patient engaged in heavy manual work, surgery was preferred as it was thought that nonunion might be encountered particularly because of the effect of forces around the coracoid.


Annals of Plastic Surgery | 2015

Triggering of the Digits After Carpal Tunnel Surgery.

Mehmet Ali Acar; Harun Kütahya; Ali Güleç; Mehmet Elmadag; Nazim Karalezli; Tunç Cevat Öğün

IntroductionCarpal tunnel syndrome (CTS) and trigger finger may be seen simultaneously in the same hand. The development of trigger finger in patients undergoing CTS surgery is not rare, but the relationship between these conditions has not been fully established.The aims of this prospective randomized study were to investigate the incidence of trigger finger in patient groups undergoing transverse carpal ligament releasing (TCL) or TCL together with distal forearm fascia releasing and to identify other factors that may have an effect of these conditions. Materials and MethodThis prospective randomized study evaluated 159 hands of 113 patients for whom CTS surgery was planned. The patients were separated into 2 groups: group 1 (79 hands of 57 patients) undergoing TCL releasing only and group 2 (80 hands of 56 patients) undergoing TCL and distal forearm fascia releasing together. The age and gender of the patients, dominant hand, physical examination findings, visual analogue scale (VAS), and electromyography (EMG) results were recorded. Follow-up examinations were made at 1, 3, 6, 12, and 24 months for all patients. We noted development of trigger finger in the surgical groups, and its location and response to treatment. ResultsThe incidence of trigger finger development was statistically significantly different between group 1 and group 2 (13.9% and 31.3%, respectively). The logistic regression analysis of factors affecting the development of trigger finger posttreatment found that the surgical method and severity of EMG were significant, whereas the effects of the other factors studied were not found to have any statistical significance. ConclusionThere was an increased risk of postoperative trigger finger development in patients undergoing TCL and distal forearm fascia releasing surgery for CTS compared to those undergoing CTL only. There is a need for further studies to support this result and further explain the etiology.


The Scientific World Journal | 2013

Transverse Carpal Ligament and Forearm Fascia Release for the Treatment of Carpal Tunnel Syndrome Change the Entrance Angle of Flexor Tendons to the A1 Pulley: The Relationship between Carpal Tunnel Surgery and Trigger Finger Occurence

Nazim Karalezli; Harun Kütahya; Ali Güleç; Serdar Toker; Hakan Karabörk; Tunç Cevat Öğün

Purpose. The appearance of trigger finger after decompression of the carpal tunnel without a preexisting symptom has been reported in a few articles. Although, the cause is not clear yet, the loss of pulley action of the transverse carpal ligament has been accused mostly. In this study, we planned a biomechanical approach to fresh cadavers. Methods. The study was performed on 10 fresh amputees of the arm. The angles were measured with (1) the transverse carpal ligament and the distal forearm fascia intact, (2) only the transverse carpal ligament incised, (3) the distal forearm fascia incised to the point 3 cm proximal from the most proximal part of the transverse carpal ligament in addition to the transverse carpal ligament. The changes between the angles produced at all three conditions were compared to each other. Results. We saw that the entrance angle increased in all of five fingers in an increasing manner from procedure 1 to 3, and it was seen that the maximal increase is detected in the middle finger from procedure 1 to procedure 2 and the minimal increase is detected in little finger. Discussion. Our results support that transverse carpal ligament and forearm fascia release may be a predisposing factor for the development of trigger finger by the effect of changing the enterance angle to the A1 pulley and consequently increase the friction in this anatomic area. Clinical Relevance. This study is a cadaveric study which is directly investigating the effect of a transverse carpal ligament release on the enterance angle of flexor tendons to A1 pulleys in the hand.


Case reports in orthopedics | 2013

Schwannoma of the Median Nerve at the Wrist and Palmar Regions of the Hand: A Rare Case Report

Harun Kütahya; Ali Güleç; Yunus Güzel; Burkay Kacira; Serdar Toker

Schwannomas are also known as neurolemmas that are usually originated from Schwann cells located in the peripheric nerve sheaths. They are the most common tumours of the hand (0.8–2%). They usually present solitary swelling along the course of the nerve however multiple lesions may be present in cases of NF type 1, familial neurofibromatosis, and sporadic schwannomatosis. Schwannomas are generally represented as an asymptomatic mass; however pain, numbness and fatigue may take place with the increasing size of the tumour. EMG (electromyelography), MRI (magnetic resonance imagination), and USG (ultrasound) are helpful in the diagnosis. Surgical removal is usually curative. In this paper, we present a 24-year-old male referred to our clinic for a lump located at the volar side of the left wrist and a lump located in his left palm and numbness at his 3rd and 4th fingers. Total excision was performed for both lesions. Histopathological examination of the masses revealed typical features of schwannoma. At the 6th-month followup the patient was symptom-free except for slight paresthesia of the 3rd and the 4th fingers. For our knowledge, this is the second case in the literature presenting wrist and palm involvement of the median nerve schwannoma.


Plastic and reconstructive surgery. Global open | 2016

Percutaneous Release of the First Dorsal Extensor Compartment: A Cadaver Study.

Ali Güleç; Faik Türkmen; Serdar Toker; Mehmet Ali Acar

Background: To evaluate the efficiency of the percutaneous 18-G needle technique in releasing the fibro-osseous sheath over the first dorsal extensor compartment of the hand. Methods: Using anatomic landmarks, percutaneous release was performed with an 18-G needle on 48 wrists of 24 cadavers. The specimens were then dissected and examined for the completeness of the first dorsal extensor compartment release and any tendon or neurovascular injuries. The tunnel length, number of abductor pollicis longus and extensor pollicis brevis tendons, presence of an intertendinous septum, and the effects of these parameters on percutaneous release were evaluated. Results: Percutaneous release was performed on all of the wrists, and the evaluation of the adequacy of release revealed 25 complete releases, 21 partial releases, and 2 missed releases. There were 19 cases of tendon complications. No neurovascular injuries were noted. The mean tunnel length was 2.66 ± 30 cm, and the mean number of tendons was 2.75 ± 0.86. A septum was present in 33.3% of cases. Tunnel length and tendon number had no statistically significant effect on release, whereas the presence of a septum was significantly associated with inadequate tunnel release and the development of tendon complications. Conclusions: Percutaneous release of the first dorsal extensor compartment using an 18-G needle was associated with high rates of incomplete release and tendon damage in the presence of an intertendinous septum. Further study is required under ultrasound guidance to determine the usefulness of percutaneous release in the first dorsal extensor compartment. Clinical Relevance: Release with a percutaneous needle tip in De Quervain’s syndrome may provide the advantages of better cosmetic results with less scar formation and an early return to work.


Acta Orthopaedica et Traumatologica Turcica | 2015

Percutaneous double-button fixation method for treatment of acute type III acromioclavicular joint dislocation

Mehmet Ali Acar; Ali Güleç; Omer Faruk Erkocak; Guney Yilmaz; Fatih Durgut; Mehmet Elmadag

OBJECTIVE The aim of this study was to evaluate the functional and radiological results of patients treated with the percutaneous double-button technique for acute acromioclavicular (AC) joint dislocation. METHODS A retrospective evaluation was performed of 13 patients surgically treated for acute Type III AC joint dislocation with the percutaneous double-button fixation method. The coracoclavicular (CC) distance of the affected side was compared with that of the healthy side on anterior-posterior radiographs obtained at the final follow-up. In the functional evaluation, Disabilities of the Arm, Shoulder and Hand (DASH), Constant, and visual analog scale (VAS) scores were used. RESULTS The 13 patients in the study included 12 males and 1 female with a mean age of 43.4 years (range: 22-60 years). The mean follow-up period was 13.61 months (range: 9-24 months). The mean CC distance on the operated side was 9.23 mm (range: 8-15 mm), and when compared with the healthy side, no statistically significant difference was observed. Preoperative Constant scores of a mean of 30.3 (range: 18-42) increased to 84.4 (range: 70-90) at the final follow-up. Preoperative DASH scores had a mean of 14.1 (range: 11-28) and decreased to 0.4 (range: 0-3) at the final follow-up (p<0.001). Mean preoperative VAS score was 6.0 (range: 5-8), which decreased to 0.6 (range: 0-3) at the final follow-up (p<0.001). CONCLUSION The percutaneous double-button fixation technique is a safe, practical, and effective fixation method that can be used as an alternative to arthroscopic and open methods for acute Type III AC joint dislocations.


Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine | 2018

Methyl methacrylate in external fixation of supracondylar humerus fractures: An experimental study

Ali Güleç; Mehmet Ali Acar; Bahattin Kerem Aydin; Teyfik Demir; Mustafa Özkaya

Supracondylar humerus fractures are common fractures around the elbow. Open fractures, comminuted metaphyseal fractures and also fractures with bone loss may need to be treated with external fixators. The aim of this study is to compare two different external fixators, tubular external fixators and polymethyl methacrylate with K wires external fixators, with regard to stiffness and stability for metaphyseal-diaphyseal osteotomies of distal humerus close to the joint. Six matched pairs (24 specimens) of second-generation sawbone humerus were prepared in a standard fashion to create a metaphyseal fracture, 5 cm proximal to the distal joint line of humerus and were randomly divided into two groups of 12 specimens each. Each sawbone humerus was osteotomized transversely at the mid-olecranon fossa with a 2-mm oscillating saw to simulate a Gartland type III fracture. The osteotomy was then reduced and stabilized using two different external fixation methods: carbon tubular external fixator with Schanz screws and methyl methacrylate with multiple K wires. Three-point bending and torsion tests were performed on the specimens. Bending and torsional stiffness of specimens were obtained for the fixation methods. According to the results of the study, the methyl methacrylate group has provided higher stiffness than classical tubular fixator with Schanz screws in three-point bending test (7.79 ± 2.33 N/mm vs 3.78 ± 1.18 N/mm, p = 0.006). The methyl methacrylate group also showed better stiffness in torsion test (0.12 ± 0.042 N m/° vs 0.067 ± 0.013 N m/°, p = 0.02). We determined for the first time in literature that external fixation with methyl methacrylate was significantly superior to the classical tubular external fixator with Schanz screws with regard to stiffness and stability under three-point bending and torsional loads. Moreover, methyl methacrylate is inexpensive and easily applied.


Medicine Science | International Medical Journal | 2018

Lower limb injuries secondary to hoeing machine accidents

Ali Güleç; Fatih Durgut; Ali Ozdemir; Ahmet Yildirim; Bahattin Kerem Aydin

Agricultural accidents are important for Turkey as more than 20 million people are involved in agriculture. The aim of this study was to evaluate orthopaedic lower limp injuries related to hoeing machine from a trauma centre localized in Middle Anatolia Region. 15 patients who hospitalized for hoeing machine were included to study due to lower limp injuries between April 2012 and May 2017. All the medical records were scanned retrospectively to evaluate “the demographic, epidemiologic characteristics of patients, cause of accidents, type of injury, duration of hospital stay and also hospital costs were evaluated retrospectively “. According to database, fifteen patients were hospitalised for lower limp injuries (14 were male, 1 female). The mean age was 45.2 (19-64) years old. The most frequent injury was tibia fracture (64 %). The mean hospital stay time was 14 days (between 1and 53). The mean cost was 11.140,16 (500 and 27.115,08) Turkish Liras. The rate of knee dislocation was 26 %. Most prevalent injury was tibia fracture. Simple precautions can be effective for preventing this kind of injuries. Meticulous examination is important as the rate of knee dislocation is high in these types of traumas.

Collaboration


Dive into the Ali Güleç's collaboration.

Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Researchain Logo
Decentralizing Knowledge