Ali Othmane

Assessing bacterial adhesion using DLVO and XDLVO theories and the jet impingement technique

In this study, the adhesion of two bacterial strains (Pseudomonas stutzeri PS, and Staphylococcus epidermidis, SE) to the glass and the indium tin oxide (ITO)-coated glass surfaces was examined qualitatively and quantitatively using the theoretical approaches and the jet impingement technique. A comparison between the DLVO and the extended DLVO (XDLVO) theories showed that the XDLVO predictions of bacterial adhesion and its reversibility are more accurate than DLVO predictions. The adhesion tests revealed that PS bacteria has much better adhesion rate than SE bacteria to both material surfaces, as predicted by XDLVO approach. Also both bacterial strains adhered better to the hydrophobic ITO-coated glass than to the hydrophilic glass surface, as predicted theoretically. Moreover, the microjet impingement technique was used not only to assess the bacterial adhesion strength on both materials, but also to verify the adhesion reversibility. The detachment stress values demonstrated that PS bacterial cells adhered strongly and irreversibly in the primary energy minimum, while SE bacterial cells adhered weakly and reversibly in the secondary energy minimum on both substrata surfaces. Also, the adhesion of both bacterial strains was found better and stronger on the hydrophobic ITO-coated glass surface than on the hydrophilic glass surface.

Highly hydrophilic surfaces from polyglycidol grafts with dual antifouling and specific protein recognition properties.

Homopolymer grafts from α-tert-butoxy-ω-vinylbenzyl-polyglycidol (PGL) were prepared on gold and stainless steel (SS) substrates modified by 4-benzoyl-phenyl (BP) moieties derived from the electroreduction of the parent salt 4-benzoyl benzene diazonium tetrafluoroborate. The grafted BP aryl groups efficiently served to surface-initiate photopolymerization (SIPP) of PGL. In similar conditions, SIPP of hydroxyethyl methacrylate (HEMA) permitted the production of PHEMA grafts as model surfaces. Water contact angles were found to be 66°, 15°, and 0° for SS-BP, SS-PHEMA, and SS-PPGL, respectively. The spontaneous spreading of water drops on SS-PPGL was invariably observed with 1.5 μL water drops. PPGL thus appears as a superhydrophilic polymer. Resistance to nonspecific adsorption of proteins of PPGL and PHEMA grafts on gold was evaluated by surface plasmon resonance (SPR) using antibovine serum albumin (anti-BSA). The results conclusively show that PPGL-grafts exhibit enhanced resistance to anti-BSA adsorption compared to the well-known hydrophilic PHEMA. PPGL grafts were further modified with BSA through the carbonyldiimidazole activation of the OH groups providing immunosensing surfaces. The so-prepared PPGL-grafted BSA hybrids specifically interacted with anti-BSA in PBS as compared to antimyoglobin. It is clear that the superhydrophilic character of PPGL grafts opens new avenues for biomedical applications where surfaces with dual functionality, namely, specific protein grafting together with resistance to biofouling, are required.

Love-wave bacteria-based sensor for the detection of heavy metal toxicity in liquid medium

The present work deals with the development of a Love-wave bacteria-based sensor platform for the detection of heavy metals in liquid medium. The acoustic delay-line is inserted in an oscillation loop in order to record the resonance frequency in real-time. A Polydimethylsiloxane (PDMS) chip with a liquid chamber is maintained by pressure above the acoustic wave propagation path. Bacteria (Escherichia coli) were fixed as bioreceptors onto the sensitive surface of the sensor coated with a polyelectrolyte (PE) multilayer using a simple and efficient layer-by-layer (LbL) electrostatic self-assembly procedure. Poly(allylamine hydrochloride) (PAH cation) and poly(styrene sulfonate) (PSS anion) were alternatively deposited so that the strong attraction between oppositely charged polyelectrolytes resulted in the formation of a (PAH-PSS)(n)-PAH molecular multilayer. The real-time characterization of PE multilayer and bacteria deposition is based on the measurement of the resonance frequency perturbation due to mass loading during material deposition. Real-time response to various concentrations of cadmium (Cd(2+)) and mercury (Hg(2+)) has been investigated. A detection limit as low as 10(-12) mol/l has been achieved, above which the frequency increases gradually up to 10(-3) mol/l, after a delay of 60 s subsequent to their introduction onto bacterial cell-based biosensors. Beyond a 10(-3) mol/l a steep drop in frequency was observed. This response has been attributed to changes in viscoelastic properties, related to modifications in bacteria metabolism.

Investigating specific antigen/antibody binding with the atomic force microscope

The aim of this work is to detect immune complexes without any kind of labelling of each of the immunological species, with a view to create a very sensitive biosensor. This is achieved by using the atomic force microscopy. We have proceeded by imaging the antibody (anti-rabbit IgG) or anti-rabbit IgG moieties adsorbed onto mica surface, before and after incubation of two kinds of antigens: a specific (rabbit IgG) and a non-specific one (sheep IgG). The analysis using the height histograms reveals many interesting features. We propose a general framework for interpreting these analysis, which enables the discrimination between specific and non-specific complexes.

Investigating antibody–antigen binding with atomic force microscopy

Abstract Adhesive interactions between antigen–antibody play a central role in immune system operation. The objective of this paper is to detect immune complexes without any label, by using atomic force microscopy (AFM). We have proceeded by imaging antibody (anti-rabbit IgG) or anti-rabbit IgG moieties adsorbed onto mica surface, before and after incubation of two kinds of antigens: a specific (rabbit IgG) and a non-pecific one (sheep IgG). The analysis using the height histograms reveals many interesting features. We propose a general framework for interpreting height histogram measurements, which enable the discrimination between specific and non-specific complexes.

AFM, CLSM and EIS characterization of the immobilization of antibodies on indium–tin oxide electrode and their capture of Legionella pneumophila

The microscopic surface molecular structures and properties of monoclonal anti-Legionella pneumophila antibodies on an indium-tin oxide (ITO) electrode surface were studied to elaborate an electrochemical immunosensor for Legionella pneumophila detection. A monoclonal anti-Legionella pneumophila antibody (MAb) has been immobilized onto an ITO electrode via covalent chemical bonds between antibodies amino-group and the ring of (3-Glycidoxypropyl) trimethoxysilane (GPTMS). The functionalization of the immunosensor was characterized by atomic force microscopy (AFM), water contact angle measurement, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in the presence of [Fe(CN)₆](3-/4-) as a redox probe. Specific binding of Legionella pneumophila sgp 1 cells onto the antibody-modified ITO electrode was shown by confocal laser scanning microscopy (CLSM) imaging and EIS. AFM images evidenced the dense and relatively homogeneous morphology on the ITO surface. The formation of the complex epoxysilane-antibodies acting as barriers for the electron transfer between the electrode surface and the redox species in the solution induced a significant increase in the charge transfer resistance (Rct) compared to all the electric elements. A linear relationship between the change in charge transfer resistance (ΔRct=Rct after immunoreactions - Rct control) and the logarithmic concentration value of L. pneumophila was observed in the range of 5 × 10(1)-5 × 10(4) CFU mL(-1) with a limit of detection 5 × 10(1)CFU mL(-1). The present study has demonstrated the successful deposition of an anti-L. pneumophila antibodies on an indium-tin oxide surface, opening its subsequent use as immuno-captor for the specific detection of L. pneumophila in environmental samples.

Red blood cells imaging and antigen-antibody interaction measurement

In the present study the atomic force microscope (AFM) was used to image the surface morphology of red blood cells (RBC) for the first time. The AFM yielded very reproducible images without appreciable modifications of the sample surfaces. In addition to this topographical imaging, we have developed an experimental approach to measure the binding strength between antibody (anti-A), and the RBC antigen A, when reversible bonds between specific molecules such as antigen and antibody mediate the adhesion. The experimental results suggest that the procedure established here may be used for specific antibody detection. This study has also enhanced our understanding under physiological conditions of molecular interaction in particular antigen-antibody.

Endothelial cell adhesion on polyelectrolyte multilayer films functionalised with fibronectin and collagen

The seeding of endothelial cells on biomaterial surfaces has become a major challenge to achieve better haemocompatibility of these surfaces. Multilayers of polyelectrolytes formed by the layerby-layer method are promising in this respect. In this study, the interactions of endothelial cells with multilayered polyelectrolytes films were investigated. The build-ups were prepared by selfassembled alternatively adsorbed polyanions and polycations functionalised with fibronectin and collagen. Anionic poly(sodium 4-styrenesulfonate) and cationic poly(allylamine hydrochloride) polyelectrolytes were chosen as a model system. Elaborated surfaces were characterised by electrochemical impedance spectroscopy and cyclic voltammetry. The modified electrode showed good reversible electrochemical properties and high stability in an electrolyte solution. The film ohmic resistance was highest when the film was coated with fibronectin; the parameters so determined were correlated with atomic force microscopy images. Cell colorimetric assay (WST-1) and immunofluorescence were used to quantify the cell viability and evaluate the adhesion properties. When cultured on a surface where proteins were deposited, cells adhered and proliferated better with fibronectin than with collagen. In addition, a high surface free energy was favourable to adhesion and proliferation (48.8 mJ m−2 for fibronectin and 39.7 mJ m−2 for collagen, respectively). Endothelial cells seeded on functionalised-polyelectrolyte multilayer films showed a good morphology and adhesion necessary for the development of a new endothelium.

Discriminating DNA mismatches by electrochemical and gravimetric techniques

A silicon nitride functionalized electrode and a 104 MHz lithium tantalate (LiTaO₃) surface acoustic wave (SAW) sensor have been used to investigate target-probe recognition processes. Electrochemical and gravimetric measurements have been considered to monitor hybridization of single base mismatch (SBM) in synthetic oligonucleotides and single-nucleotide polymorphisms ApoE in real clinical genotypes. Obvious discrimination of SBM in nucleotides has been shown by both gravimetric and electrochemical techniques, without labeling nor amplification. Investigations on mismatches nature and position have also been considered. For guanine-adenine (GA), guanine-thymine (GT) and guanine-guanine (GG) mismatches, the sensors responses present a dependence upon positions. Considering the capacitance variations and hybridization rates, results showed that gravimetric transduction is more sensitive than electrochemical one. Moreover, the highest value of GT hybridization rate (in the middle position) was found in accordance with the nearest-neighbor model, where the considered configuration appears as the most thermodynamically stable. For the real samples, where the electrochemical transduction, by combining capacitance and flat-band potential measurements, were found more sensitive, the results show that the realized sensor permits an unambiguous discrimination of recognition between fully complementary, non-complementary and single base mismatched targets, and even between the combination of differently matched strands.

Electrochemical monitoring of Chlorhexidine Digluconate effect on polyelectrolyte immobilized bacteria and kinetic cell adhesion

The electrochemical impedance spectroscopy (EIS) technique has been used as a sensitive method to explore the effect of antibacterial molecules on immobilized bacteria and biofilm formation. In this work, we describe the electrochemical spectroscopy as a powerful method to monitor the effect of chlorhexidine digluconate (CHX-Dg) on polyelectrolyte immobilized Escherichia coli K12 MG1655 and the kinetics of cell adhesion on gold electrodes. The experimental impedance data were modeled with a Zview program to find the best equivalent electrical circuit and analyse its parameters properties. Polyelectrolyte multilayer formation on the electrode surface and bacteria immobilization greatly increased the electron-transfer resistance (R(et)) and reduced the constant phase element (CPE(dl)). The effect of CHX-Dg was studied in a 0.5 x 10⁻⁴ mmol l⁻¹ to 0.5 mmol l⁻¹ range. The relation between the evolution of R(et) and CHX-Dg concentration was found to be negatively correlated. When CHX-Dg was added, the electrochemical monitoring of the bacterial kinetic adhesion showed that the electrodes capacity (C(P)) variation remained stable, demonstrating that the addition of CHX-Dg in the broth inhibited bacterial adhesion.