Alicja Nowicka

Response of Human Dental Pulp Capped with Biodentine and Mineral Trioxide Aggregate

INTRODUCTION Biodentine is a new bioactive cement that is similar to the widely used mineral trioxide aggregate (MTA). It has dentin-like mechanical properties, which may be considered a suitable material for clinical indications of dentin-pulp complex regeneration such as direct pulp capping. The purpose of the present study was to compare the response of the pulp-dentin complex in human teeth after direct capping with this new tricalcium silicate-based cement with that of MTA. METHODS Pulps in 28 caries-free maxillary and mandibular permanent intact human molars scheduled for extraction for orthodontic reasons were mechanically exposed and assigned to 1 of 2 experimental groups, Biodentine or MTA, and 1 control group. Assay of periapical response and clinical examination were performed. After 6 weeks, the teeth were extracted, stained with hematoxylin-eosin, and categorized by using a histologic scoring system. RESULTS The majority of specimens showed complete dentinal bridge formation and an absence of inflammatory pulp response. Layers of well-arranged odontoblast and odontoblast-like cells were found to form tubular dentin under the osteodentin. Statistical analysis showed no significant differences between the Biodentine and MTA experimental groups during the observation period. CONCLUSIONS Within the limitations of this study, Biodentine had a similar efficacy in the clinical setting and may be considered an interesting alternative to MTA in pulp-capping treatment during vital pulp therapy.

Tomographic Evaluation of Reparative Dentin Formation after Direct Pulp Capping with Ca(OH)2, MTA, Biodentine, and Dentin Bonding System in Human Teeth

INTRODUCTION New materials can increase the efficiency of pulp capping through the formation of a complete reparative dentin bridge with no toxic effects. The present study involved tomographic evaluations of reparative dentin bridge formation after direct pulp capping with calcium hydroxide, mineral trioxide aggregate (MTA), Biodentine (Septodont, Saint Maur des Fossés, France), and Single Bond Universal (3M ESPE, Seefeld, Germany) in human teeth. METHODS Forty-four caries-free, intact, human third molars scheduled for extraction were subjected to mechanical pulp exposure and assigned to 1 of 4 experimental groups depending on the pulp capping agent used: calcium hydroxide, MTA, Biodentine, or Single Bond Universal. After 6 weeks, the teeth were extracted and processed for cone-beam computed tomographic imaging and histologic examination. Tomographic data, including the density and volume of formed reparative dentin bridges, were evaluated using a scoring system. RESULTS The reparative dentin formed in the calcium hydroxide, MTA, and Biodentine groups was significantly superior to that formed in the Single Bond Universal group in terms of thickness and volume. The dentin bridges in the Biodentine group showed the highest average and maximum volumes. The mean density of dentin bridges was the highest in the MTA group and the lowest in the Single Bond Universal group. CONCLUSIONS The volume of reparative dentin bridges formed after direct pulp capping is dependent on the material used. Biodentine and MTA resulted in the formation of bridges with a significantly higher average volume compared with Single Bond Universal, and cone-beam computed tomographic imaging allowed for the identification of the location of dentin bridges.

Pulpo-dentin complex response after direct capping with self-etch adhesive systems

The purpose of the present study was to evaluate morphologically the response of feline teeth pulp to direct pulp capping with two different self-etch adhesive systems. Twenty-four cavities in feline teeth were mechanically exposed and assigned to one of two experimental groups: AdheSE + Tetric Ceram (the ASE group), or Adper Prompt L-Pop + Filtek Supreme (the APLP group). There was also a control group Dycal Ca(OH)2 liner + Amalgam (the CH group eight teeth), and six teeth were used as an intact control group. The animals were sacrificed after 40 days. The teeth were removed and processed for standard histological evaluation, using a scoring system for inflammatory cell response, pulp tissue disorganisation, reparative tissue formation, and the presence of bacteria. Statistical analysis revealed no significant differences between the ASE and APLP selfetching resin systems during the observation period. The majority of the specimens presented inflammatory pulp response with tissue disorganisation and a lack of dentinal bridge formation. CH capping resulted in a significantly smaller inflammatory pulp response and a considerably higher incidence of reparative dentin formation. ASE and APLP were comparably effective as direct pulp capping materials, but their application resulted in significantly greater pulp tissue damage than CH capping. Further in vivo human studies are necessary to determine which adhesive resin systems should be clinically used for direct pulp capping without incurring severe damage to the pulpal tissue.

Clinical and Histological Evaluation of Direct Pulp Capping on Human Pulp Tissue Using a Dentin Adhesive System

Objective. This study presents a clinical and histological evaluation of human pulp tissue responses after direct capping using a new dentin adhesive system. Methods. Twenty-eight caries-free third molar teeth scheduled for extraction were evaluated. The pulps of 22 teeth were mechanically exposed and randomly assigned to 1 of 2 groups: Single Bond Universal or calcium hydroxide. Another group of 6 teeth acted as the intact control group. The periapical response was assayed, and a clinical examination was performed. The teeth were extracted after 6 weeks, and a histological analysis was performed. The pulp status was assessed, and the thickness of the dentin bridge was measured and categorized using a histological scoring system. Results. The clinical phase was asymptomatic for Single Bond Universal patients. Patients in the calcium hydroxide group reported mild symptoms of pain, although the histological examination revealed that dentin bridges with or without limited pulpitis had begun forming in each tooth. The universal adhesive system exhibited nonsignificantly increased histological signs of pulpitis (P > 0.05) and a significantly weaker thin mineralized tissue layer (P < 0.001) compared with the calcium hydroxide group. Conclusion. The results suggest that Single Bond Universal is inappropriate for human pulp capping; however, further long-term studies are needed to determine the biocompatibility of this agent.

Effects of different etching modes on the nanoleakage of universal adhesives: A systematic review and meta-analysis

PURPOSE The aim of this systematic review was to evaluate how etching modes affect the nanoleakage of universal adhesive from in vitro studies. MATERIALS AND METHODS PubMed/MEDLINE, Web of Science, Scopus and Science Direct electronic databases were searched for in vitro studies that evaluated the nanoleakage of universal adhesives. A total of 511 (after duplicate removal) potentially relevant records were identified in the literature search. The titles and abstracts of the retrieved studies were screened by two independent researchers according to the main concept. Subsequently, the full text of potentially relevant studies was screened using the exclusion criteria. Thirteen studies were subjected to qualitative analysis, and 5 of them were selected for a detailed meta-analysis. RESULTS Seven universal adhesives were evaluated in this review. The meta-analysis demonstrated that the etch-and-rinse technique significantly reduced the nanoleakage of the Peak Universal and G-Bond Plus adhesives, whereas the self-etch mode reduced the nanoleakage of All-Bond Universal. In comparison, the etching technique did not significantly alter the nanoleakage of either Prime&Bond Elect or Scotchbond Universal which was characterized by the smallest nanoleakage. CONCLUSIONS Etching modes significantly, in various ways, influence the nanoleakage of universal adhesives. CLINICAL SIGNIFICANCE Contrary to the drive to simplify bonding technologies, an appreciation of their adhesive components and how these perform according to bonding technique could yield a knowledge-based practical approach that ultimately improves the longevity of direct composite restorations.

Risk factors in oroantral communication while extracting the upper third molar: Systematic review

The removal of the upper third molar is a procedure commonly performed in oral and maxillofacial surgery. Maxillary third molars are generally less difficult to extract than mandibular third molars. The surgical removal of maxillary third molars is usually associated with low complication rates and low morbidity. This procedure involves the risk of developing complications such as oroantral communication, displacement into adjacent anatomic spaces, fracture of the maxillary tuberosity, and root fracture. Orthopantomograms are the standard preoperative imaging modality, but there is no proven tool for predicting oroantral communication. New possibilities have been offered by cone-beam computed tomography, which is increasingly used in dentistry and is an innovative technique that provides more information as it eliminates the superimposition of surrounding structures and allows the acquisition of 3-dimensional images and their qualitative assessment. The aim of this systematic review was to assess risk factors during the extraction of the upper third molar using orthopantomograms and cone-beam computed tomography.

Comparison of Effectiveness of Endoxal and Endosal in Removal of Smear Layer from Root Canal Dentine Surface: A SEM Study

Background. During biomechanical root canal preparation, a smear layer, consisting of organic and inorganic parts, appears on the surface of the canal dentine. Dent. Med. Probl. 2016, 53, 4, 483–489 DOI: 10.17219/dmp/63934