Aline Lima Hermes Müller

Bromine and iodine determination in active pharmaceutical ingredients by ICP-MS

A method based on microwave-induced combustion (MIC) was applied for digestion of active pharmaceutical ingredients (APIs) and subsequent determination of bromine and iodine by inductively coupled plasma mass spectrometry (ICP-MS). Ten APIs including amoxicillin, atenolol, clavulanic acid, clonazepan, diltiazem, haloperidol, imipramine, nimesulide, propranolol and sodium diclofenac were decomposed by MIC. Combustion of 500 mg of each API was possible in less than 30 s using 20 bars of oxygen as initial pressure. A single and diluted solution (50 mmol L−1 (NH4)2CO3) was used for the absorption of both analytes and a reflux step of 5 min was applied to improve analyte recoveries. Final digests were suitable to Br and I determination by ICP-MS. Accuracy was evaluated using certified reference materials and agreement better than 95 and 97% for Br and I was obtained, respectively. Results were also compared with those obtained by ion chromatography (IC). The carbon content in digests obtained after decomposition was lower than 500 mg L−1 avoiding interferences in the determination step for both techniques. With the use of MIC, up to eight samples could be processed simultaneously and only diluted solutions are required, minimizing reagent consumption and waste generation. The limits of detection for Br and I by ICP-MS were 0.02 and 0.001 μg g−1, respectively, that were considered suitable for the determination of these elements in the investigated active pharmaceutical ingredients.

Bromine and chlorine determination in cigarette tobacco using microwave-induced combustion and inductively coupled plasma optical emission spectrometry

(NH4)2CO3 as absorbing solution and 5 min of reflux. Temperature during combustion was higher than 1400 °C and the residual carbon content in digest obtained after MIC was lower than 1%. Up to eight samples could be processed simultaneously and a single absorbing solution was suitable for both Br and Cl. Limit of quantification by MIC and further ICP OES determination was 12 and 6 µg g -1 for Br and Cl, respectively.

Total sulfur determination in residues of crude oil distillation using FT-IR/ATR and variable selection methods.

Total sulfur concentration was determined in atmospheric residue (AR) and vacuum residue (VR) samples obtained from petroleum distillation process by Fourier transform infrared spectroscopy with attenuated total reflectance (FT-IR/ATR) in association with chemometric methods. Calibration and prediction set consisted of 40 and 20 samples, respectively. Calibration models were developed using two variable selection models: interval partial least squares (iPLS) and synergy interval partial least squares (siPLS). Different treatments and pre-processing steps were also evaluated for the development of models. The pre-treatment based on multiplicative scatter correction (MSC) and the mean centered data were selected for models construction. The use of siPLS as variable selection method provided a model with root mean square error of prediction (RMSEP) values significantly better than those obtained by PLS model using all variables. The best model was obtained using siPLS algorithm with spectra divided in 20 intervals and combinations of 3 intervals (911-824, 823-736 and 737-650 cm(-1)). This model produced a RMSECV of 400 mg kg(-1) S and RMSEP of 420 mg kg(-1) S, showing a correlation coefficient of 0.990.

Study and determination of elemental impurities by ICP-MS in active pharmaceutical ingredients using single reaction chamber digestion in compliance with USP requirements

In this work a method for active pharmaceutical ingredients (APIs) digestion using the single reaction chamber (SRC-UltraWave™) system was proposed following the new recommendations of United States Pharmacopeia (USP). Levodope (LEVO), primaquine diphosphate (PRIM), propranolol hydrochloride (PROP) and sulfamethoxazole (SULF) were used to evaluate the digestion efficiency of the proposed method. A comparison of digestion efficiency was performed by measuring the carbon content and residual acidity in digests obtained using SRC and in digests obtained using conventional microwave-assisted digestion system (Multiwave(TM)). Three digestion solutions (concentrated HNO3, aqua regia or inverse aqua regia) were evaluated for digestion of APIs. The determination of Cd, Ir, Mn, Mo, Ni, Os, Pb, Pd, Pt, Rh, Ru was performed using inductively coupled plasma mass spectrometry (ICP-MS) in standard mode. Dynamic reaction cell (DRC) mode was used for the determination of (51)V, (52)Cr, (53)Cr, (63)Cu and (65)Cu in order to solve polyatomic ion interferences. Arsenic and Hg were determined using chemical vapor generation coupled to ICP-MS (FI-CVG-ICP-MS). Masses of 500mg of APIs were efficiently digested in a SRC-UltraWave™ system using only HNO3 and allowing a carbon content lower than 250mg L(-1) in final digests. Inverse aqua regia was suitable for digestion of sample masses up to 250mg allowing the determination of Ir, Pd, Pt, Rh and Ru. By using HNO3 or inverse aqua regia, suitable recoveries were obtained (between 91 and 109%) for all analytes (exception for Os). Limits of quantification were in agreement with USP requirements and they ranged from 0.001 to 0.015µg g(-1) for all elemental impurities (exception for Os). The proposed method was suitable for elemental impurities determination in APIs and it can be used in routine analysis for quality control in pharmaceutical industries.

Attenuated total reflectance with Fourier transform infrared spectroscopy (ATR/FTIR) and different PLS Algorithms for simultaneous determination of clavulanic acid and amoxicillin in powder pharmaceutical formulation

A method for simultaneous determination of clavulanic acid (CA) and amoxicillin (AMO) was developed using Fourier transform mid infrared technique coupled with attenuated total reflectance (ATR/FTIR) accessory. 27 samples were used as calibration set and 8 samples were used for prediction set. Calibration models were developed using partial least squares (PLS), interval PLS (iPLS), synergy PLS (siPLS) and backward PLS (biPLS). Multiplicative scatter correction and the mean centering were used and produced the best models. Relative standard error of prediction (RSEP) of 3.8% for CA and 5.1% for AMO were obtained using biPLS algorithm for ATR/FTIR data. Results obtained by the proposed methodology were compared with those using high performance liquid chromatography (HPLC) and no significant differences were obtained. The proposed method using ATR/FTIR combined to multivariate analysis methods was suitable for the simultaneous determination of CA and AMO in commercial pharmaceutical products.

Determination of bromine and iodine in shrimp and its parts by ICP-MS after decomposition using microwave-induced combustion

A digestion method based on microwave-induced combustion (MIC) was developed for bromine and iodine determination in shrimp and its parts (shells and head, and tissue) by inductively coupled plasma mass spectrometry (ICP-MS). Ammonium nitrate solution was used as an igniter for combustion and vessels were pressurized with O2 at 20 bar. Solutions of (NH4)2CO3 (50 or 100 mmol L−1) and NH4OH (25, 50, 75 or 100 mmol L−1) were evaluated as absorbing media for Br and I. Better results were obtained for Br and I determination using 50 mmol L−1 NH4OH as absorbing medium. Using this solution, blanks were always negligible and memory effects were virtually absent. The accuracy of the proposed MIC method was evaluated using a reference material (NIST 8414) with agreement better than 99% for both analytes. The limits of detection by MIC and further ICP-MS determination (Br: 0.12 μg g−1; I: 0.001 μg g−1) were better than those obtained when the extraction procedure was used. Additionally, a microwave-assisted alkaline extraction method was also evaluated using 0.11 mol L−1 TMAH as extractant solution. However, alkaline extraction was only feasible for shrimp tissue and not for whole shrimp or shells. Decomposition using MIC allowed the determination of Br and I by ICP-MS in shrimp and the respective distribution of these elements in shells and head, and in tissue avoiding the use of concentrated digestion or extraction solutions.

A Single Consumption of High Amounts of the Brazil Nuts Improves Lipid Profile of Healthy Volunteers

Background. This study investigates the effects of Brazil nut ingestion on serum lipid profile in healthy volunteers. Methods. Ten healthy subjects were enrolled in the study. Each subject was tested 4 times in a randomized crossover in relation to the ingestion of different serving sizes of the Brazil nut: 0, 5, 20, or 50 g. At each treatment point, peripheral blood was drawn before and at 1, 3, 6, 9, 24, and 48 hours and 5 and 30 days. Blood samples were tested for total cholesterol, high- and low-density lipoprotein cholesterol (HDL-c and LDL-c, resp.), triglycerides, selenium, aspartate and alanine aminotransferases, albumin, total protein, alkaline phosphatase, gamma GT, urea, creatinine, and C-reactive protein. Results. A significant increase of the plasma selenium levels was observed at 6 hours within the groups receiving the nuts. Serum LDL-c was significantly lower, whereas HDL-c was significantly higher 9 hours after the ingestion of 20 or 50 g of nuts. The biochemical parameters of liver and kidney function were not modified by ingestion of nuts. Conclusions. This study shows that the ingestion of a single serving of Brazil nut can acutely improve the serum lipid profile of healthy volunteers.

Determination of chlorine and sulfur in high purity flexible graphite using ion chromatography (IC) and inductively coupled plasma optical emission spectrometry (ICP OES) after pyrohydrolysis sample preparation

The pyrohydrolysis method was applied for digestion of high purity flexible graphite (FG) used in nuclear applications and subsequent determination of Cl and S was performed by inductively coupled plasma optical emission spectrometry (ICP OES) and ion chromatography (IC). Instrumental parameters for pyrohydrolysis were studied such as reaction time, air and water flow-rates pumped through the reactor, the type and concentration of absorbing solution (water, 10 to 200 mmol L−1 NH4OH or 100 to 1000 mmol L−1 H2O2) and the use of V2O5 as an accelerator. Sample masses up to 250 mg were decomposed using pyrohydrolysis at 1100 °C for 30 min. Quantitative recoveries of Cl and S were obtained using air and water flow-rates pumped through the reactor at 0.1 L min−1 and 0.5 mL min−1, respectively, without the use of V2O5. Absorbing solution of 50 mmol L−1 NH4OH and 250 mmol L−1 H2O2 was suitable for quantitative absorption of Cl and S. The limit of detection (LOD) was 1 μg g−1 for Cl determination by IC that was 20-fold better than that obtained by ICP OES. In this sense, IC determination is recommended for Cl determination in FG in order to meet the General Electric (GE) recommendations for nuclear materials. On the other hand, LODs obtained for S using IC and ICP OES were similar (1 μg g−1). For S determination by IC, the absorbing solution should be H2O2 in order to convert all S species to SO42−. For comparison, Cl and S were also determined in digests obtained using microwave-induced combustion (MIC). In spite of high chemical inertness that allowed combustion of only 25 mg of FG, the statistical difference between pyrohydrolysis and MIC results was not observed. Evaluation of accuracy was carried out using certified reference materials (NIST 1632c – bituminous coal and SARM 19 coal) and significant differences were not observed between certified reference values and pyrohydrolysis results. After optimizing conditions, pyrohydrolysis was suitable for quality control of Cl and S impurities in FG used for nuclear applications.

Microwave-assisted wet digestion with H2O2 at high temperature and pressure using single reaction chamber for elemental determination in milk powder by ICP-OES and ICP-MS.

In this work a green digestion method which only used H2O2 as an oxidant and high temperature and pressure in the single reaction chamber system (SRC-UltraWave™) was applied for subsequent elemental determination by inductively coupled plasma-based techniques. Milk powder was chosen to demonstrate the feasibility and advantages of the proposed method. Samples masses up to 500mg were efficiently digested, and the determination of Ca, Fe, K, Mg and Na was performed by inductively coupled plasma optical emission spectrometry (ICP-OES), while trace elements (B, Ba, Cd, Cu, Mn, Mo, Pb, Sr and Zn) were determined by inductively coupled plasma mass spectrometry (ICP-MS). Residual carbon (RC) lower than 918mgL(-1) of C was obtained for digests which contributed to minimizing interferences in determination by ICP-OES and ICP-MS. Accuracy was evaluated using certified reference materials NIST 1549 (non-fat milk powder certified reference material) and NIST 8435 (whole milk powder reference material). The results obtained by the proposed method were in agreement with the certified reference values (t-test, 95% confidence level). In addition, no significant difference was observed between results obtained by the proposed method and conventional wet digestion using concentrated HNO3. As digestion was performed without using any kind of acid, the characteristics of final digests were in agreement with green chemistry principles when compared to digests obtained using conventional wet digestion method with concentrated HNO3. Additionally, H2O2 digests were more suitable for subsequent analysis by ICP-based techniques due to of water being the main product of organic matrix oxidation. The proposed method was suitable for quality control of major components and trace elements present in milk powder in consonance with green sample preparation.

Bromine and Iodine Contents in Raw and Cooked Shrimp and Its Parts

The concentration of bromine and iodine was determined in shrimp and its parts (tissue and shells), and changes in the analyte concentration were evaluated after the cooking procedure. Bromine and iodine concentrations were determined by a method recently developed by our research group based on microwave-induced combustion for sample preparation and inductively coupled plasma mass spectrometry for analyte determination. The accuracy was evaluated using a reference material (NIST 8414) that was digested using the proposed method. No statistical difference was observed between certified and determined values (Students t test, 95% confidence level). Suitable limits of detection (Br, 0.02 μg g(-1) and I, 0.01 μg g(-1)) were obtained for both analytes. Higher concentrations of both analytes were observed in shrimp shells in comparison to shrimp tissue for raw and cooked samples. Moreover, losses of Br and I (between 24 and 43%) were observed after cooking.