Amalendu Ranjan

Alendronate coated poly-lactic-co-glycolic acid (PLGA) nanoparticles for active targeting of metastatic breast cancer

Delivery of therapeutic agents to bone is crucial in several diseases such as osteoporosis, Pagets disease, myeloproliferative diseases, multiple myeloma as well as skeletal metastasizing cancers. Prevention of cancer growth and lowering the cancer induced bone resorption is important in the treatment of bone metastasizing cancers. Keeping in mind the low diffusivity and availability of cell surface targets on cancer cells, we designed a targeted system to deliver chemotherapeutic agents to the bone microenvironment as an approach to tissue targeting using alendronate (Aln). We co-encapsulated curcumin and bortezomib in the PLGA nanoparticles to further enhance the therapeutic efficiency and overall clinical outcome. These multifunctional nanoparticles were characterized for particle size, morphology and drug encapsulation. The particles were spherical with smooth surface and had particle size of 235 ± 70.30 nm. We validated the bone targeting ability of these nanoparticles in vitro. Curcumin and bortezomib are known to have synergistic effect in inhibition of growth of cancer; however there was no synergism in the anti-osteoclastogenic activity of these agents. Surprisingly, curcumin by itself had significant inhibition of osteclastogenic activity. In vivo non-invasive bioimaging showed higher localization of Aln-coated nanoparticles to the bone compared to control groups, which was further confirmed by histological analysis. Aln-coated nanoparticles protected bone resorption and decreased the rate of tumor growth as compared to control groups in an intraosseous model of bone metastasis. Our data show efficient attachment of Aln on the surface of nanoparticles which could be used as a drug carrier for preferential delivery of multiple therapeutic agents to bone microenvironment.

Scale up, optimization and stability analysis of Curcumin C3 complex-loaded nanoparticles for cancer therapy

BackgroundNanoparticle based delivery of anticancer drugs have been widely investigated. However, a very important process for Research & Development in any pharmaceutical industry is scaling nanoparticle formulation techniques so as to produce large batches for preclinical and clinical trials. This process is not only critical but also difficult as it involves various formulation parameters to be modulated all in the same process.MethodsIn our present study, we formulated curcumin loaded poly (lactic acid-co-glycolic acid) nanoparticles (PLGA-CURC). This improved the bioavailability of curcumin, a potent natural anticancer drug, making it suitable for cancer therapy. Post formulation, we optimized our process by Reponse Surface Methodology (RSM) using Central Composite Design (CCD) and scaled up the formulation process in four stages with final scale-up process yielding 5 g of curcumin loaded nanoparticles within the laboratory setup. The nanoparticles formed after scale-up process were characterized for particle size, drug loading and encapsulation efficiency, surface morphology, in vitro release kinetics and pharmacokinetics. Stability analysis and gamma sterilization were also carried out.ResultsResults revealed that that process scale-up is being mastered for elaboration to 5 g level. The mean nanoparticle size of the scaled up batch was found to be 158.5 ± 9.8 nm and the drug loading was determined to be 10.32 ± 1.4%. The in vitro release study illustrated a slow sustained release corresponding to 75% drug over a period of 10 days. The pharmacokinetic profile of PLGA-CURC in rats following i.v. administration showed two compartmental model with the area under the curve (AUC0-∞) being 6.139 mg/L h. Gamma sterilization showed no significant change in the particle size or drug loading of the nanoparticles. Stability analysis revealed long term physiochemical stability of the PLGA-CURC formulation.ConclusionsA successful effort towards formulating, optimizing and scaling up PLGA-CURC by using Solid-Oil/Water emulsion technique was demonstrated. The process used CCD-RSM for optimization and further scaled up to produce 5 g of PLGA-CURC with almost similar physicochemical characteristics as that of the primary formulated batch.

Surface functionalization of PLGA nanoparticles by non-covalent insertion of a homo-bifunctional spacer for active targeting in cancer therapy

This work reports the surface functionalization of polymeric PLGA nanoparticles by non-covalent insertion of a homo-bifunctional chemical crosslinker, bis(sulfosuccinimidyl) suberate (BS3) for targeted cancer therapy. We dissolved BS3 in aqueous solution of PVA during formulation of nanoparticles by a modified solid/oil/water emulsion solvent evaporation method. The non-covalent insertion of BS3 was confirmed by Fourier transform infrared (FTIR) spectroscopy. Curcumin and annexin A2 were used as a model drug and a cell specific target, respectively. Nanoparticles were characterized for particle size, zeta potential and surface morphology. The qualitative assessment of antibody attachment was performed by transmission electron microscopy (TEM) as well as confocal microscopy. The optimized formulation showed antibody attachment of 86%. However, antibody attachment was abolished upon blocking the functional groups of BS3. The availability of functional antibodies was evaluated by the presence of a light chain fraction after gel electrophoresis. We further evaluated the in vitro release kinetics of curcumin from antibody coated and uncoated nanoparticles. The release of curcumin is enhanced upon antibody attachment and followed an anomalous release pattern. We also observed that the cellular uptake of nanoparticles was significantly higher in annexin A2 positive cells than in negative cells. Therefore, these results demonstrate the potential use of this method for functionalization as well as to deliver chemotherapeutic agents for treating cancer.

Combinatorial nanoparticles for cancer diagnosis and therapy.

Nanotechnology when engineered together with biotechnology opens a fascinating field with applications in diverse areas such as drug targeting and delivery, medical imaging, biosensing, biomaterials and nanotechnology. Conjugating nanoparticles with biomolecules like QD-herceptin conjugates or QD-aptamer (Apt)-DOX conjugates provides many opportunities for improving many of the current challenges in cancer diagnosis and therapy. This paper reviews combinatorial nanoparticles designed and formulated for cancer imaging and therapy, including inorganic nanoparticles (quantum dots, iron oxide particles, gold nanoparticles and silica and carbon nanoparticles), polymeric nanoparticles (PLGA, PLGA-PEG, PAMAM), liposomes and lipid nanoparticles. These nanoparticles are multifunctional in nature and combine two or more functions like targeting, imaging and therapy. In this review, we have classified these combinatorial targeted nanoparticles into inorganic, polymeric and liposome based nanosystems.

Spectroscopic properties of curcumin: orientation of transition moments.

Curcumin, a naturally occurring yellow-orange pigment with potent antioxidant and antitumor properties, has been attracting researchers from a wide range of fields including chemistry, spectroscopy, biology, and medicine. Ultrafast excited-state processes such as solvation and excited-state intramolecular hydrogen atom transfer (ESIHT) make curcumin an attractive agent for photodynamic therapy. In this report we present studies of linear dichroism and fluorescence anisotropy in oriented and isotropic media. The results show transition moments (long wavelength absorption and emission) oriented along the long molecular axis. Comparison of linear dichroism and excitation anisotropy in oriented and isotropic media suggests that excited-state intramolecular hydrogen atom transfer is probably associated with intramolecular conformational changes that can be constrained in highly stretched poly(vinyl alcohol) (PVA) film.

Fluorescence detection of MMP-9. I. MMP-9 selectively cleaves Lys-Gly-Pro-Arg-Ser-Leu-Ser-Gly-Lys peptide.

MMP-9 enzyme recognizes a peptide sequence Lys-Gly-Pro-Arg-Ser-Leu-Ser-Gly-Lys and cleaves the peptide into two parts. We synthesized a dual fluorophore beacon consisting of 5-FAM and Cy5 dyes. The fluorescence emission of the fluorescein moiety is dramatically quenched by Cy5 molecule due to Förster Resonance Energy Transfer (FRET) and the fluorescence of Cy5 is strongly enhanced. Upon addition of MMP-9 enzyme, the fluorescence of 5-FAM intensifies and Cy5 decreases. The control MMP-2 enzyme does not cause any changes in either 5-FAM or Cy5 fluorescence. We believe that our observation will help in early detection of elevated MMP-9 levels under disease conditions.

A sustained release formulation of chitosan modified PLCL:poloxamer blend nanoparticles loaded with optical agent for animal imaging

The objective of this study was to develop optical imaging agent loaded biodegradable nanoparticles with indocynanine green (ICG) using chitosan modified poly(L-lactide-co-epsilon-caprolactone) (PLCL):poloxamer (Pluronic F68) blended polymer. Nanoparticles were formulated with an emulsification solvent diffusion technique using PLCL and poloxamer as blend-polymers. Polyvinyl alcohol (PVA) and chitosan were used as stabilizers. The particle size, shape and zeta potential of the formulated nanoparticles and the release kinetics of ICG from these nanoparticles were determined. Further, biodistribution of these nanoparticles was studied in mice at various time points until 24 h following intravenous administration, using a non-invasive imaging system. The average particle size of the nanoparticles was found to be 146 ± 3.7 to 260 ± 4.5 nm. The zeta potential progressively increased from - 41.6 to + 25.3 mV with increasing amounts of chitosan. Particle size and shape of the nanoparticles were studied using transmission electron microscopy (TEM) which revealed the particles to be smooth and spherical in shape. These nanoparticles were efficiently delivered to the cytoplasm of the cells, as observed in prostate and breast cancer cells using confocal laser scanning microscopy. In vitro release studies indicated sustained release of ICG from the nanoparticles over a period of seven days. Nanoparticle distribution results in mice showing improved uptake and accumulation with chitosan modified nanoparticles in various organs and slower clearance at different time points over a 24 h period as compared to unmodified nanoparticles. The successful formulation of such cationically modified nanoparticles for encapsulating optical agents may lead to a potential deep tissue imaging technique for tumor detection, diagnosis and therapy.

Nanoparticle Effects on Human Platelets in Vitro: A Comparison between PAMAM and Triazine Dendrimers

Triazine and PAMAM dendrimers of similar size and number of cationic surface groups were compared for their ability to promote platelet aggregation. Triazine dendrimers (G3, G5 and G7) varied in molecular weight from 8 kDa–130 kDa and in surface groups 16–256. PAMAM dendrimers selected for comparison included G3 (7 kDa, 32 surface groups) and G6 (58 kDa, 256 surface groups). The treatment of human platelet-rich plasma (PRP) with low generation triazine dendrimers (0.01–1 µM) did not show any significant effect in human platelet aggregation in vitro; however, the treatment of PRP with larger generations promotes an effective aggregation. These results are in agreement with studies performed with PAMAM dendrimers, where large generations promote aggregation. Triazine dendrimers promote aggregation less aggressively than PAMAM dendrimers, a factor attributed to differences in cationic charge or the formation of supramolecular assemblies of dendrimers.

Development of Biodegradable Nanocarriers Loaded with a Monoclonal Antibody

Treatments utilizing monoclonal antibody therapeutics against intracellular protein-protein interactions in cancer cells have been hampered by several factors, including poor intracellular uptake and rapid lysosomal degradation. Our current work examines the feasibility of encapsulating monoclonal antibodies within poly(lactic-co-glycolic acid) (PLGA) nanoparticles using a water/oil/water double emulsion solvent evaporation technique. This method can be used to prepare protective polymeric nanoparticles for transporting functional antibodies to the cytoplasmic compartment of cancer cells. Nanoparticles were formulated and then characterized using a number of physical and biological parameters. The average nanoparticle size ranged from 221 to 252 nm with a low polydispersity index. Encapsulation efficiency of 16%–22% and antibody loading of 0.3%–1.12% were observed. The antibody molecules were released from the nanoparticles in a sustained manner and upon release maintained functionality. Our studies achieved successful formulation of antibody loaded polymeric nanoparticles, thus indicating that a PLGA-based antibody nanoformulation is a promising intracellular delivery vehicle for a large number of new intracellular antibody targets in cancer cells.

Fluorescence Detection of MMP-9. II. Ratiometric FRET-Based Sensing With Dually Labeled Specific Peptide

In our previous paper we showed that the MMP-9 enzyme recognizes a specific peptide sequence, Lys-Gly- Pro-Arg-Ser-Leu-Ser-Gly-Lys, and cleaves the peptide into two parts [1]. In this study, the peptide is labeled with two dyes, carboxyfluorescein (5-FAM) and Cy5. A highly efficient energy transfer of over 80% results in a dominant emission of Cy5 at ~670 nm with an excitation of 470 nm. Severance of the peptide by the MMP-9 enzyme eliminates Förster Resonance Energy Transfer (FRET) and strongly increases the fluorescence of the 5-FAM dye. In this manuscript we describe the strategy for a FRET-based method for MMP-9 enzyme detection. The basic aim is to apply a ratio-metric sensing technique in which a ratio of green/red fluorescence intensity is measured as a function of enzyme concentration. The ratio-metric method eliminates many experimental variables and enables accurate MMP-9 detection.