Amos Matsiko

Mesenchymal stem cell fate is regulated by the composition and mechanical properties of Collagen-Glycosaminoglycan scaffolds

In stem cell biology, focus has recently turned to the influence of the intrinsic properties of the extracellular matrix (ECM), such as structural, composition and elasticity, on stem cell differentiation. Utilising collagen-glycosaminoglycan (CG) scaffolds as an analogue of the ECM, this study set out to determine the effect of scaffold stiffness and composition on naive mesenchymal stem cell (MSC) differentiation in the absence of differentiation supplements. Dehydrothermal (DHT) and 1-ethyl-3-3-dimethyl aminopropyl carbodiimide (EDAC) crosslinking treatments were used to produce three homogeneous CG scaffolds with the same composition but different stiffness values: 0.5, 1 and 1.5 kPa. In addition, the effect of scaffold composition on MSC differentiation was investigated by utilising two glycosaminoglycan (GAG) types: chondroitin sulphate (CS) and hyaluronic acid (HyA). Results demonstrated that scaffolds with the lowest stiffness (0.5 kPa) facilitated a significant up-regulation in SOX9 expression indicating that MSCs are directed towards a chondrogenic lineage in more compliant scaffolds. In contrast, the greatest level of RUNX2 expression was found in the stiffest scaffolds (1.5 kPa) indicating that MSCs are directed towards an osteogenic lineage in stiffer scaffolds. Furthermore, results demonstrated that the level of up-regulation of SOX9 was higher within the CHyA scaffolds in comparison to the CCS scaffolds indicating that hyaluronic acid further influences chondrogenic differentiation. In contrast, enhanced RUNX2 expression was observed in the CCS scaffolds in comparison to the CHyA scaffolds suggesting an osteogenic influence of chondroitin sulphate on MSC differentiation. In summary, this study demonstrates that, even in the absence of differentiation supplements, scaffold stiffness can direct the fate of MSCs, an effect that is further enhanced by the GAG type used within the CG scaffolds. These results have significant implications for the therapeutic uses of stem cells and enhance our understanding of the physical effects of the in vivo microenvironment on stem cell behaviour.

Addition of hyaluronic acid improves cellular infiltration and promotes early-stage chondrogenesis in a collagen-based scaffold for cartilage tissue engineering.

The response of mesenchymal stem cells (MSCs) to a matrix largely depends on the composition as well as the extrinsic mechanical and morphological properties of the substrate to which they adhere to. Collagen-glycosaminoglycan (CG) scaffolds have been extensively used in a range of tissue engineering applications with great success. This is due in part to the presence of the glycosaminoglycans (GAGs) in complementing the biofunctionality of collagen. In this context, the overall goal of this study was to investigate the effect of two GAG types: chondroitin sulphate (CS) and hyaluronic acid (HyA) on the mechanical and morphological characteristics of collagen-based scaffolds and subsequently on the differentiation of rat MSCs in vitro. Morphological characterisation revealed that the incorporation of HyA resulted in a significant reduction in scaffold mean pore size (93.9 μm) relative to collagen-CS (CCS) scaffolds (136.2 μm). In addition, the collagen-HyA (CHyA) scaffolds exhibited greater levels of MSC infiltration in comparison to the CCS scaffolds. Moreover, these CHyA scaffolds showed significant acceleration of early stage gene expression of SOX-9 (approximately 60-fold higher, p<0.01) and collagen type II (approximately 35-fold higher, p<0.01) as well as cartilage matrix production (7-fold higher sGAG content) in comparison to CCS scaffolds by day 14. Combining their ability to stimulate MSC migration and chondrogenesis in vitro, these CHyA scaffolds show great potential as appropriate matrices for promoting cartilage tissue repair.

Incorporation of PLGA nanoparticles into porous chitosan-gelatin scaffolds: influence on the physical properties and cell behavior

Bone regeneration can be accelerated by localized delivery of appropriate growth factors/biomolecules. Localized delivery can be achieved by a 2-level system: (i) incorporation of biomolecules within biodegradable particulate carriers (nanoparticles), and (ii) inclusion of such particulate carriers (nanoparticles) into suitable porous scaffolds. In this study, freeze-dried porous chitosan-gelatin scaffolds (CH-G: 1:2 ratio by weight) were embedded with various amounts of poly(lactide-co-glycolide) (PLGA) nanoparticles, precisely 16.6%, 33.3% and 66.6% (respect to CH-G weight). Scaffolds loaded with PLGA nanoparticles were subjected to physico-mechanical and biological characterizations including morphological analysis, swelling and dissolution tests, mechanical compression tests and cell viability tests. Results showed that incorporation of PLGA nanoparticles into porous crosslinked CH-G scaffolds: (i) changed the micro-architecture of the scaffolds in terms of mean pore diameter and pore size distribution, (ii) reduced the dissolution degree of the scaffolds, and (iii) increased the compressive modulus. On the other hand, the water uptake behavior of CH-G scaffolds containing PLGA nanoparticles significantly decreased. The incorporation of PLGA nanoparticles did not affect the biocompatibility of CH-G scaffolds.

Long-term controlled delivery of rhBMP-2 from collagen–hydroxyapatite scaffolds for superior bone tissue regeneration

The clinical utilization of recombinant human bone morphogenetic protein 2 (rhBMP-2) delivery systems for bone regeneration has been associated with very severe side effects, which are due to the non-controlled and non-targeted delivery of the growth factor from its collagen sponge carrier post-implantation which necessitates supraphysiological doses. However, rhBMP-2 presents outstanding regenerative properties and thus there is an unmet need for a biocompatible, fully resorbable delivery system for the controlled, targeted release of this protein. With this in mind, the purpose of this work was to design and develop a delivery system to release low rhBMP-2 doses from a collagen-hydroxyapatite (CHA) scaffold which had previously been optimized for bone regeneration and recently demonstrated significant healing in vivo. In order to enhance the potential for clinical translation by minimizing the design complexity and thus upscaling and regulatory hurdles of the device, a microparticle and chemical functionalization-free approach was chosen to fulfill this aim. RhBMP-2 was combined with a CHA scaffold using a lyophilization fabrication process to produce a highly porous CHA scaffold supporting the controlled release of the protein over the course of 21days while maintaining in vitro bioactivity as demonstrated by enhanced alkaline phosphatase activity and calcium production by preosteoblasts cultured on the scaffold. When implanted in vivo, these materials demonstrated increased levels of healing of critical-sized rat calvarial defects 8weeks post-implantation compared to an empty defect and unloaded CHA scaffold, without eliciting bone anomalies or adjacent bone resorption. These results demonstrate that it is possible to achieve bone regeneration using 30 times less rhBMP-2 than INFUSE®, the current clinical gold standard; thus, this work represents the first step of the development of a rhBMP-2 eluting material with immense clinical potential.

Advanced Strategies for Articular Cartilage Defect Repair

Articular cartilage is a unique tissue owing to its ability to withstand repetitive compressive stress throughout an individual’s lifetime. However, its major limitation is the inability to heal even the most minor injuries. There still remains an inherent lack of strategies that stimulate hyaline-like articular cartilage growth with appropriate functional properties. Recent scientific advances in tissue engineering have made significant steps towards development of constructs for articular cartilage repair. In particular, research has shown the potential of biomaterial physico-chemical properties significantly influencing the proliferation, differentiation and matrix deposition by progenitor cells. Accordingly, this highlights the potential of using such properties to direct the lineage towards which such cells follow. Moreover, the use of soluble growth factors to enhance the bioactivity and regenerative capacity of biomaterials has recently been adopted by researchers in the field of tissue engineering. In addition, gene therapy is a growing area that has found noteworthy use in tissue engineering partly due to the potential to overcome some drawbacks associated with current growth factor delivery systems. In this context, such advanced strategies in biomaterial science, cell-based and growth factor-based therapies that have been employed in the restoration and repair of damaged articular cartilage will be the focus of this review article.

Controlled release of transforming growth factor-β3 from cartilage-extra-cellular-matrix-derived scaffolds to promote chondrogenesis of human-joint-tissue-derived stem cells.

The objective of this study was to develop a scaffold derived from cartilaginous extracellular matrix (ECM) that could be used as a growth factor delivery system to promote chondrogenesis of stem cells. Dehydrothermal crosslinked scaffolds were fabricated using a slurry of homogenized porcine articular cartilage, which was then seeded with human infrapatellar-fat-pad-derived stem cells (FPSCs). It was found that these ECM-derived scaffolds promoted superior chondrogenesis of FPSCs when the constructs were additionally stimulated with transforming growth factor (TGF)-β3. Cell-mediated contraction of the scaffold was observed, which could be limited by the additional use of 1-ethyl-3-3dimethyl aminopropyl carbodiimide (EDAC) crosslinking without suppressing cartilage-specific matrix accumulation within the construct. To further validate the utility of the ECM-derived scaffold, we next compared its chondro-permissive properties to a biomimetic collagen-hyaluronic acid (HA) scaffold optimized for cartilage tissue engineering (TE) applications. The cartilage-ECM-derived scaffold supported at least comparable chondrogenesis to the collagen-HA scaffold, underwent less contraction and retained a greater proportion of synthesized sulfated glycosaminoglycans. Having developed a promising scaffold for TE, with superior chondrogenesis observed in the presence of exogenously supplied TGF-β3, the final phase of the study explored whether this scaffold could be used as a TGF-β3 delivery system to promote chondrogenesis of FPSCs. It was found that the majority of TGF-β3 that was loaded onto the scaffold was released in a controlled manner over the first 10days of culture, with comparable long-term chondrogenesis observed in these TGF-β3-loaded constructs compared to scaffolds where the TGF-β3 was continuously added to the media. The results of this study support the use of cartilage-ECM-derived scaffolds as a growth factor delivery system for use in articular cartilage regeneration.

Recapitulating endochondral ossification: a promising route to in vivo bone regeneration

Despite its natural healing potential, bone is unable to regenerate sufficient tissue within critical‐sized defects, resulting in a non‐union of bone ends. As a consequence, interventions are required to replace missing, damaged or diseased bone. Bone grafts have been widely employed for the repair of such critical‐sized defects. However, the well‐documented drawbacks associated with autografts, allografts and xenografts have motivated the development of alternative treatment options. Traditional tissue engineering strategies have typically attempted to direct in vitro bone‐like matrix formation within scaffolds prior to implantation into bone defects, mimicking the embryological process of intramembranous ossification (IMO). Tissue‐engineered constructs developed using this approach often fail once implanted, due to poor perfusion, leading to avascular necrosis and core degradation. As a result of such drawbacks, an alternative tissue engineering strategy, based on endochondral ossification (ECO), has begun to emerge, involving the use of in vitro tissue‐engineered cartilage as a transient biomimetic template to facilitate bone formation within large defects. This is driven by the hypothesis that hypertrophic chondrocytes can secrete angiogenic and osteogenic factors, which play pivotal roles in both the vascularization of constructs in vivo and the deposition of a mineralized extracellular matrix, with resulting bone deposition. In this context, this review focuses on current strategies taken to recapitulate ECO, using a range of distinct cells, biomaterials and biochemical stimuli, in order to facilitate in vivo bone formation. Copyright

Multi-layered collagen-based scaffolds for osteochondral defect repair in rabbits

INTRODUCTION Identification of a suitable treatment for osteochondral repair presents a major challenge due to existing limitations and an urgent clinical need remains for an off-the-shelf, low cost, one-step approach. A biomimetic approach, where the biomaterial itself encourages cellular infiltration from the underlying bone marrow and provides physical and chemical cues to direct these cells to regenerate the damaged tissue, provides a potential solution. To meet this need, a multi-layer collagen-based osteochondral defect repair scaffold has been developed in our group. AIM The objective of this study was to assess the in vivo response to this scaffold and determine its ability to direct regenerative responses in each layer in order to repair osteochondral tissue in a critical-sized defect in a rabbit knee. METHODS Multi-layer scaffolds, consisting of a bone layer composed of type I collagen (bovine source) and hydroxyapatite (HA), an intermediate layer composed of type I and type II collagen and HA; and a superficial layer composed of type I and type II collagen (porcine source) and hyaluronic acid (HyA), were implanted into critical size (3 × 5 mm) osteochondral defects created in the medial femoral condyle of the knee joint of New Zealand white rabbits and compared to an empty control group. Repair was assessed macroscopically, histologically and using micro-CT analysis at 12 weeks post implantation. RESULTS Analysis of repair tissue demonstrated an enhanced macroscopic appearance in the multi-layer scaffold group compared to the empty group. In addition, diffuse host cellular infiltration in the scaffold group resulted in tissue regeneration with a zonal organisation, with repair of the subchondral bone, formation of an overlying cartilaginous layer and evidence of an intermediate tidemark. CONCLUSION These results demonstrate the potential of this biomimetic multi-layered scaffold to support and guide the host reparative response in the treatment of osteochondral defects. STATEMENT OF SIGNIFICANCE Osteochondral defects, involving cartilage and the underlying subchondral bone, frequently occur in young active patients due to disease or injury. While some treatment options are available, success is limited and patients often eventually require joint replacement. To address this clinical need, a multi-layer collagen-based osteochondral defect repair scaffold designed to direct host-stem cell mediated tissue formation within each region, has been developed in our group. The present study investigates the in vivo response to this scaffold in a critical-sized defect in a rabbit knee. Results shows the scaffolds ability to guide the host reparative response leading to tissue regeneration with a zonal organisation, repair of the subchondral bone, formation of an overlying cartilaginous layer and evidence of an intermediate tidemark.

Scaffold mean pore size influences mesenchymal stem cell chondrogenic differentiation and matrix deposition.

Recent investigations into micro-architecture of scaffolds has revealed that mean pore sizes are cell-type specific and influence cellular shape, differentiation, and extracellular matrix secretion. In this context, the overall goal of this study was to investigate whether scaffold mean pore sizes affect mesenchymal stem cell initial attachment, chondrogenic gene expression, and cartilage-like matrix deposition. Collagen-hyaluronic acid (CHyA) scaffolds, recently developed in our laboratory for in vitro chondrogenesis, were fabricated with three distinct mean pore sizes (94, 130, and 300 μm) by altering the freeze-drying technique used. It was evident that scaffolds with the largest mean pore sizes (300 μm) stimulated significantly higher cell proliferation, chondrogenic gene expression, cartilage-like matrix deposition, and resulting bulk compressive modulus after in vitro culture, relative to scaffolds with smaller mean pore sizes (94, 130 μm). Taken together, these findings demonstrate the importance of scaffold micro-architecture in the development of advanced tissue engineering strategies for articular cartilage defect repair.

An Endochondral Ossification-Based Approach to Bone Repair: Chondrogenically Primed Mesenchymal Stem Cell-Laden Scaffolds Support Greater Repair of Critical-Sized Cranial Defects Than Osteogenically Stimulated Constructs In Vivo.

The lack of success associated with the use of bone grafts has motivated the development of tissue engineering approaches for bone defect repair. However, the traditional tissue engineering approach of direct osteogenesis, mimicking the process of intramembranous ossification (IMO), leads to poor vascularization. In this study, we speculate that mimicking an endochondral ossification (ECO) approach may offer a solution by harnessing the potential of hypertrophic chondrocytes to secrete angiogenic signals that support vasculogenesis and enhance bone repair. We hypothesized that stimulation of mesenchymal stem cell (MSC) chondrogenesis and subsequent hypertrophy within collagen-based scaffolds would lead to improved vascularization and bone formation when implanted within a critical-sized bone defect in vivo. To produce ECO-based constructs, two distinct scaffolds, collagen-hyaluronic acid (CHyA) and collagen-hydroxyapatite (CHA), with proven potential for cartilage and bone repair, respectively, were cultured with MSCs initially in the presence of chondrogenic factors and subsequently supplemented with hypertrophic factors. To produce IMO-based constructs, CHA scaffolds were cultured with MSCs in the presence of osteogenic factors. These constructs were subsequently implanted into 7 mm calvarial defects on Fischer male rats for up to 8 weeks in vivo. The results demonstrated that IMO- and ECO-based constructs were capable of supporting enhanced bone repair compared to empty defects. However, it was clear that the scaffolds, which were previously shown to support the greatest cartilage formation in vitro (CHyA), led to the highest new bone formation (p < 0.05) within critical-sized bone defects 8 weeks postimplantation. We speculate this to be associated with the secretion of angiogenic signals as demonstrated by the higher VEGF protein production in the ECO-based constructs before implantation leading to the greater blood vessel ingrowth. This study thus demonstrates the ability of recapitulating a developmental process of bone formation to develop tissue-engineered constructs that manifest appreciable promise for bone defect repair.