Amund N. Løvik

Carbon emissions of infrastructure development.

Identifying strategies for reconciling human development and climate change mitigation requires an adequate understanding of how infrastructures contribute to well-being and greenhouse gas emissions. While direct emissions from infrastructure use are well-known, information about indirect emissions from their construction is highly fragmented. Here, we estimated the carbon footprint of the existing global infrastructure stock in 2008, assuming current technologies, to be 122 (-20/+15) Gt CO2. The average per-capita carbon footprint of infrastructures in industrialized countries (53 (± 6) t CO2) was approximately 5 times larger that that of developing countries (10 (± 1) t CO2). A globalization of Western infrastructure stocks using current technologies would cause approximately 350 Gt CO2 from materials production, which corresponds to about 35-60% of the remaining carbon budget available until 2050 if the average temperature increase is to be limited to 2 °C, and could thus compromise the 2 °C target. A promising but poorly explored mitigation option is to build new settlements using less emissions-intensive materials, for example by urban design; however, this strategy is constrained by a lack of bottom-up data on material stocks in infrastructures. Infrastructure development must be considered in post-Kyoto climate change agreements if developing countries are to participate on a fair basis.

Long-Term Strategies for Increased Recycling of Automotive Aluminum and Its Alloying Elements

Aluminum recycling currently occurs in a cascading fashion, where some alloys, used in a limited number of applications, absorb most of the end-of-life scrap. An expected increase in scrap supply in coming decades necessitates restructuring of the aluminum cycle to open up new recycling paths for alloys and avoid a potential scrap surplus. This paper explores various interventions in end-of-life management and recycling of automotive aluminum, using a dynamic substance flow analysis model of aluminum and its alloying elements with resolution on component and alloy level (vehicle-component-alloy-element model). It was found that increased component dismantling before vehicle shredding can be an effective, so far underestimated, intervention in the medium term, especially if combined with development of safety-relevant components such as wheels from secondary material. In the long term, automatic alloy sorting technologies are most likely required, but could at the same time reduce the need for magnesium removal in refining. Cooperation between the primary and secondary aluminum industries, the automotive industry, and end-of-life vehicle dismantlers is therefore essential to ensure continued recycling of automotive aluminum and its alloying elements.

The global anthropogenic gallium system: determinants of demand, supply and efficiency improvements.

Gallium has been labeled as a critical metal due to rapidly growing consumption, importance for low-carbon technologies such as solid state lighting and photovoltaics, and being produced only as a byproduct of other metals (mainly aluminum). The global system of primary production, manufacturing, use and recycling has not yet been described or quantified in the literature. This prevents predictions of future demand, supply and possibilities for efficiency improvements on a system level. We present a description of the global anthropogenic gallium system and quantify the system using a combination of statistical data and technical parameters. We estimated that gallium was produced from 8 to 21% of alumina plants in 2011. The most important applications of gallium are NdFeB permanent magnets, integrated circuits and GaAs/GaP-based light-emitting diodes, demanding 22-37%, 16-27%, and 11-21% of primary metal production, respectively. GaN-based light-emitting diodes and photovoltaics are less important, both with 2-6%. We estimated that 120-170 tons, corresponding to 40-60% of primary production, ended up in production wastes that were either disposed of or stored. While demand for gallium is expected to rise in the future, our results indicated that it is possible to increase primary production substantially with conventional technology, as well as improve the system-wide material efficiency.

Stocks, Flows, and Distribution of Critical Metals in Embedded Electronics in Passenger Vehicles

One of the major applications of critical metals (CMs) is in electrical and electronic equipment (EEE), which is increasingly embedded in other products, notably passenger vehicles. However, recycling strategies for future CM quantities in end-of-life vehicles (ELVs) are poorly understood, mainly due to a limited understating of the complexity of automotive embedded EEE. We introduce a harmonization of the network structure of automotive electronics that enables a comprehensive quantification of CMs in all embedded EEE in a vehicle. This network is combined with a material flow analysis along the vehicle lifecycle in Switzerland to quantify the stocks and flows of Ag, Au, Pd, Ru, Dy, La, Nd, and Co in automotive embedded EEE. In vehicles in use, we calculated 5-2+3 t precious metals in controllers embedded in all vehicle types and 220-60+90 t rare earth elements (REE); found mainly in five electric motors: alternator, starter, radiator-fan and electronic power steering motor embedded in conventional passenger vehicles and drive motor/generator embedded in hybrid and electric vehicles. Dismantling these devices before ELV shredding, as well as postshredder treatment of automobile shredder residue may increase the recovery of CMs from ELVs. Environmental and economic implications of such recycling strategies must be considered.

Byproduct Metal Availability Constrained by Dynamics of Carrier Metal Cycle: The Gallium–Aluminum Example

Future availability of byproduct metals is not limited by geological stocks, but by the rate of primary production of their carrier metals, which in turn depends on the development of their in-use stocks, the product lifetimes, and the recycling rates. This linkage, while recognized conceptually in past studies, has not been adequately taken into account in resource availability estimates. Here, we determine the global supply potential for gallium up to 2050 based on scenarios for the global aluminum cycle, and compare it with scenarios for gallium demand derived from a dynamic model of the gallium cycle. We found that the gallium supply potential is heavily influenced by the development of the in-use stocks and recycling rates of aluminum. With current applications, a shortage of gallium is unlikely by 2050. However, the gallium industry may need to introduce ambitious recycling- and material efficiency strategies to meet its demand. If in-use stocks of aluminum saturate or decline, a shift to other gallium sources such as zinc or coal fly ash may be required.

Elaborating the history of our cementing societies: an in-use stock perspective

Modern cities and societies are built fundamentally based on cement and concrete. The global cement production has risen sharply in the past decades due largely to urbanization and construction. Here we deployed a top-down dynamic material flow analysis (MFA) model to quantify the historical development of cement in-use stocks in residential, nonresidential, and civil engineering sectors of all world countries. We found that global cement production spreads unevenly among 184 countries, with China dominating the global production and consumption after the 1990s. Nearly all countries have shown an increasing trend of per capita cement in-use stock in the past century. The present per capita cement in-use stocks vary from 10 to 40 tonnes in major industrialized and transiting countries and are below 10 tonnes in developing countries. Evolutionary modes identified from historical patterns suggest that per capita in-use cement stock growth generally complies with an S-shape curve and relates closely to affluence and urbanization of a country, but more in-depth and bottom-up investigations are needed to better understand socioeconomic drivers behind stock growth. These identified in-use stock patterns can help us better estimate future demand of cement, explore strategies for emissions reduction in the cement industry, and inform CO2 uptake potentials of cement based products and infrastructure in service.

A Material Flow Model for Impurity Accumulation in Beverage Can Recycling Systems

Recycling of aluminum is beneficial due to reduced energy inputs, greenhouse gas emissions and raw material costs. Beverage cans are currently the second largest source of old scrap, and could become even larger with improved collection. However, impurities such as iron, titanium or lead may impede end-of-life recycling at higher levels, especially in closed-loop systems where they can accumulate over time. A generic material flow model for impurity accumulation in a simple recycling system is presented here. Sensitivity analysis was used to investigate the effect of key parameters on dynamics of accumulation and concentration at steady state. It was found that it takes longer to reach steady state at high collection rates, and that the steady state concentration is disproportionally higher. Increasing the U.S. beverage can collection rate from today’s 54% to the goal of 75% may cause more than a doubling of impurity concentrations unless better scrap treatment and remelting are developed in parallel or the scrap is used in other applications.

ProSUM: Prospecting secondary Raw Materials in the Urban Mine and Mining Wastes

ProSUM - Latin for “I am useful” - aims to provide better information on raw materials from secondary origins. It focuses in particular on the content of Critical Raw Materials (CRMs) from Batteries (BATT), Waste Electrical and Electronic Equipment (WEEE), End of Life Vehicles (ELV) and Mining Wastes (MIN) available for processing in Europe. However, data for these products are usually very scattered amongst a variety of institutions, including government agencies, universities, NGOs and industry. This deficit is addressed in this H2020 funded project. ProSUM will establish a European network of expertise on secondary sources of CRMs, vital to todays high-tech society. It coordinates efforts to collect secondary CRM data and collate maps of stocks and flows for materials and products in the “urban mine”. The project will construct a comprehensive inventory identifying and mapping CRM stocks and flows across the European Union (EU). Via a user-friendly, open-access Urban Mine Knowledge Data Platform (EU-UMKDP), it will combine and relate them to primary raw materials data from the EU-FP7 Minerals4EU project and communicate the results online through the future European Geological Data Infrastructure (EGDI) at large. It will also provide update protocols, standards and recommendations to maintain and expand the EU-UMKDP in the future.