Ana B. Pinar

Structural analysis of hierarchically organized zeolites.

Hierarchically organized zeolites are materials retaining the crystalline order and associated functionality of bulk zeolites while also integrating a multilevel pore network. Here, the authors review the raft of techniques applied to characterize their crystal, pore and active site structures.

Comparison of Homogeneous and Heterogeneous Catalysts for Glucose‐to‐Fructose Isomerization in Aqueous Media

Herein, the first comparison of the mechanisms of glucose-to-fructose isomerization in aqueous media enabled by homogeneous (CrCl3 and AlCl3 ) and heterogeneous catalysts (Sn-beta) by using isotopic-labeling studies is reported. A pronounced kinetic isotope effect (KIE) was observed if the deuterium label was at the C2 position, thus suggesting that a hydrogen shift from the C2 to C1 positions was the rate-limiting step with the three catalysts. (13) C and (1) H NMR spectroscopic investigations confirmed that an intra-hydride-transfer reaction pathway was the predominant reaction channel for all three catalysts in aqueous media. Furthermore, the deuterium atom in the labeled glucose could be mapped onto hydroxymethylfurfural and formic acid through reactions that followed the isomerization step in the presence of Brønsted acids. In all three catalysts, the active site appeared to be a bifunctional Lewis-acidic/Brønsted-basic site, based on a speciation model and first-principles calculations. For the first time, a mechanistic similarities between the homogeneous and heterogeneous catalysis of aldose-to-ketose isomerization is established and it is suggested that learning from homogeneous catalysis could assist in the development of improved heterogeneous catalysts.

Zeolites with Continuously Tuneable Porosity

Zeolites are important materials whose utility in industry depends on the nature of their porous structure. Control over microporosity is therefore a vitally important target. Unfortunately, traditional methods for controlling porosity, in particular the use of organic structure-directing agents, are relatively coarse and provide almost no opportunity to tune the porosity as required. Here we show how zeolites with a continuously tuneable surface area and micropore volume over a wide range can be prepared. This means that a particular surface area or micropore volume can be precisely tuned. The range of porosity we can target covers the whole range of useful zeolite porosity: from small pores consisting of 8-rings all the way to extra-large pores consisting of 14-rings.

The Assembly‐Disassembly‐Organization‐Reassembly Mechanism for 3D‐2D‐3D Transformation of Germanosilicate IWW Zeolite

Hydrolysis of germanosilicate zeolites with the IWW structure shows two different outcomes depending on the composition of the starting materials. Ge-rich IWW (Si/Ge=3.1) is disassembled into a layered material (IPC-5P), which can be reassembled into an almost pure silica IWW on treatment with diethoxydimethylsilane. Ge-poor IWW (Si/Ge=6.4) is not completely disassembled on hydrolysis, but retains some 3D connectivity. This structure can be reassembled into IWW by incorporation of Al to fill the defects left when the Ge is removed.

Dopant-siting selectivity in nanoporous catalysts: control of proton accessibility in zeolite catalysts through the rational use of templates

A computational study is performed to rationalize the effect of the organic template molecules used in the synthesis of zeolites on their catalytic behaviour. Apart from being structure-directing, these molecules influence the location of heteroatoms. Molecules bearing acidic protons susceptible to forming H-bonds with framework oxygens show the strongest dopant-siting direction.

Molecular insights into the self-aggregation of aromatic molecules in the synthesis of nanoporous aluminophosphates: a multilevel approach.

Fluorescence spectroscopy and a range of computer simulation techniques are used to study the structure directing effect of benzylpyrrolidine (BP) and (S)-(-)-N-benzylpyrrolidine-2-methanol (BPM) in the synthesis of nanoporous aluminophosphate frameworks with AFI (one-dimensional channels) and SAO (three-dimensional interconnected channels) topologies. We study the supramolecular chemistry of BP and BPM molecules in aqueous solution and compare it with the aggregation state of the molecules found when they are inside the AlPO nanopores after crystallization. The aggregation of the molecules within the structures can be explained by a combination of thermodynamic and kinetic effects. The former are given by the stability of the molecular species interacting with the oxide networks relative to their stability in solution; the latter depend on the aggregation behavior of the molecules in the synthesis gels prior to crystallization. Whereas BPM only forms one type of aggregate in solution, which has the appropriate conformation to match the empty channels of the forming nanoporous frameworks, BP forms aggregates with different molecular orientations, of which only one matches the framework interstices. This different supramolecular chemistry, together with the higher interaction of BPM with the oxide networks, makes BPM a better structure directing agent (SDA); it is also responsible for the higher incorporation of BPM as dimers in the frameworks, especially in the AFI structure, observed experimentally. The concentration of the SDA molecules in the gels, and so the density per volume of the SDAs, determines the exclusion zone from which the pores and/or cavities of the framework will arise, and so the porous network of the formed material. A clear relationship between the SDA density in solution and in the framework is observed, thus enabling an eventual control of the material density by adjusting the SDA concentration in the gels. The topological instability intrinsic to these open framework structures is compensated by a high host-guest interaction energy; the SAO topology is further stabilized by doping with Zn. Our computational results account for and rationalize all the effects observed experimentally, providing a complete picture of the mode of structure direction of these aromatic molecules in the synthesis of nanoporous aluminophosphates.

Aluminum Redistribution during the Preparation of Hierarchical Zeolites by Desilication

A literature survey reveals a prominent reduction in the concentration of Brønsted acid sites in hierarchically organized zeolites with increasing mesoporous or external surface area independent of the framework type or synthesis route; this suggests a common fundamental explanation. To determine the cause, nature, and impact of the underlying changes in aluminum speciation, this study combines a multitechnique analysis that integrates basic characterization, a detailed synchrotron XRD and multiple-quantum NMR spectroscopy assessment, and catalytic tests to correlate evolution of the properties with performance during successive steps in the preparation of hierarchical MFI-type zeolites by desilication. The findings, subsequently generalized to FAU- and BEA-type materials, identify the crucial impact of calcination on the protonic form, which is an integral step in the synthesis and regeneration of zeolite catalysts; on aluminum coordination; and the associated acidity trends.

Synthesis of Zn-containing microporous aluminophosphate with the STA-1 structure

Zn atoms have been incorporated into the STA-1 microporous framework (SAO framework type) for the first time. Pure Zn-containing STA-1 aluminophosphate has been obtained in the presence of either (S)-(-)-N-benzylpyrrolidine-2-methanol (BPM) or benzylpyrrolidine (BP) as structure-directing agent. Characterisation results have demonstrated that the organic molecules remain intact within the microporous framework after the hydrothermal treatment. The X-ray diffraction pattern has been indexed in the tetragonal space group I ̅4m2 (a = 13.7828(1) Å and c = 21.9444(4) Å). Chemical analysis and (31)P MAS NMR spectroscopy confirm the incorporation of ca. 4.5 Zn atoms per unit cell by isomorphous substitution of Al. This large-pore aluminophosphate has one of the lowest framework densities among the known zeolite structures, and is therefore of potential interest for applications in adsorption or catalytic processes involving bulky molecules.

The effect of water on the mechanical properties of soluble and insoluble ceramic cements

Ceramic cements are good candidates for the stabilization of fractured bone due to their potential ease of application and biological advantages. New formulations of ceramic cements have been tested for their mechanical properties, including strength, stiffness, toughness and durability. The changes in the mechanical properties of a soluble cement (calcium sulfate) upon water-saturation (saturation) was reported in our previous study, highlighting the need to test ceramic cements using saturated samples. It is not clear if the changes in the mechanical properties of ceramic cements are exclusive to soluble cements. Therefore the aim of the present study was to observe the changes in the mechanical properties of soluble and insoluble ceramic cements upon saturation. A cement with high solubility (calcium sulfate dihydrate, CSD) and a cement with low solubility (dicalcium phosphate dihydrate, DCPD) were tested. Three-point bending tests were performed on four different groups of: saturated CSD, non-saturated CSD, saturated DCPD, and non-saturated DCPD samples. X-ray diffraction analysis and scanning electron microscopy were also performed on a sample from each group. Flexural strength, effective flexural modulus and flexural strain at maximum stress, lattice volume, and crystal sizes and shape were compared, independently, between saturated and non-saturated groups of CSD and DCPD. Although material dissolution did not occur in all cases, all calculated mechanical properties decreased significantly in both CSD and DCPD upon saturation. The results indicate that the reductions in the mechanical properties of saturated ceramic cements are not dependent on the solubility of a ceramic cement. The outcome raised the importance of testing any implantable ceramic cements in saturated condition to estimate its in vivo mechanical properties.

Co-directing role of template mixtures in zeolite synthesis

Abstract Cooperative structure directing effect of a small cation, acting as a co-template, and a bulky structure directing agent (SDA) has been studied. Benzyl-methylpyrrolidinium cation (bmp) has been used as the main SDA, and tetramethylammonium (TMA) and Na + cations as the co-templates. It has been observed that they exert a marked effect in the nucleation kinetic as well as in the nature of the synthesis products.