Ana Clarissa dos Santos Pires

Thermodynamic study of colorimetric transitions in polydiacetylene vesicles induced by the solvent effect.

We report the synthesis of 10,12-pentacosadyinoic acid (PCDA) and PCDA + cholesterol (CHO) + sphingomyelin (SPH) vesicles dispersed in water and the determination of their colorimetric response induced by small amount of organic solvents. In the absence of solvent, PCDA and PCDA/CHO/SPH vesicles showed an intense blue color. The addition of CHCl(3), CH(2)Cl(2), and CCl(4) caused a colorimetric transition (CT) in both structures with the following efficiency: CHCl(3) > CH(2)Cl(2) ≅ CCl(4). However, CH(3)OH did not cause a blue-to-red transition. By microcalorimetric technique we also determined, for the first time, the enthalpy change associated with the CT process and the energy of interaction between solvent molecules and vesicle self-assembly. We observed that the chloride solvents induced a colorimetric transition, but the thermodynamic mechanism was different for each of them. CT induced by CHCl(3) was enthalpically driven, while that caused by CH(2)Cl(2) or CCl(4) was entropically driven.

Increased presevation of sliced mozzarella cheese by antimibrobial sachet incorporated with allyl isothiocyanate

There is an increasing tendency to add natural antimicrobials of plant origin into food. The objective of this work was to develop a microbial sachet incorporated with allyl isothiocyanate (AIT), a volatile compound of plant origin, and to test its efficiency against growth of yeasts and molds, Staphylococcus sp. and psychrotrophic bacteria on sliced mozzarella cheese. Another objective was to quantify the concentration of AIT in the headspace of cheese packaging. A reduction of 3.6 log cycles was observed in yeasts and molds counts in the mozzarella packed with the antimicrobial sachet over 15-day storage time. The sachet also showed an antibacterial effect on Staphylococcus sp., reducing 2.4 log cycles after 12-day storage. Psychrotrophic bacteria species were the most resistant to the antimicrobial action. The highest concentration of AIT (0.08µg.mL(-1)) inside the active packaging system was observed at the 6(-)day of storage at 12 oC ± 2 oC. At the end of the storage time, AIT concentration decreased to only 10% of the initial concentration. Active packaging containing antimicrobial sachet has a potential use for sliced mozzarella, with molds and yeasts being the most sensitive to the antimicrobial effects.

Recent Patents on Active Packaging for Food Application

Active packaging, a new concept in the field of food packaging, has been developed in order to meet the new demands of consumers and the diverse goals existing in the food industry. There are several types of active packaging, including gas, moisture, and UV absorbers, as well as flavor, antioxidant, and antimicrobial releasers. In this review, we aim to highlight recent patents and developments in active packaging, as well as the principles of action for each of these technologies. Active packaging is an innovative area, which allows the production of food products with better sensorial features and extended shelf-life, thus ensuring enhanced food quality and safety. It is important to inform consumers about this new technology, since it may be a revolutionary tool in the food technology area.

Oxygen Scavengers: An Approach on Food Preservation

Oxygen (O2) presence in food packages is mainly due to failures in the packaging process, such as mixture of gases containing oxygen residues, or inefficient vacuum. Vacuum packaging has been widely used to eliminate oxygen in the package prior to sealing. However, the oxygen that permeates from the outside environment into the package through the packaging material cannot be removed by this method (Byun et al., 2011).

Effect of Active Packaging Incorporated with Triclosan on Bacteria Adhesion

Antimicrobial polyethylene and cellulose based films incorporated with triclosan were studied. The antimicrobial efficacy, the hydrophobicity, microscopic and the mechanical characteristics of the films, as well free energy of adhesion between bacteria and antimicrobial films were evaluated. It was observed that both polyethylene and cellulose based films incorporated with the antimicrobial were homogeneous. Furthermore, the addition of triclosan did not affect mechanical characteristics of the films (P > 0.05). However, triclosan incorporated into polyethylene films reduced its hydrophobicity while antimicrobial cellulose based films became more hydrophobic. The adhesion was thermodynamically favorable between tested bacteria and polyethylene films. On the other hand, the adhesion to triclosan cellulose based film was thermodynamically unfavorable to Staphylococcus aureus and Escherichia coli and favorable to Listeria innocua and Pseudomonas aeruginosa. Polyethylene and cellulose based films showed inhibitory effect against S. aureus and E. coli, being the inhibition halo higher for polyethylene films. This study improves the knowledge about antimicrobial films.

Binding thermodynamics of synthetic dye Allura Red with bovine serum albumin.

The interaction between Allura Red and bovine serum albumin (BSA) was studied in vitro at pH 7.4. The fluorescence quenching was classified as static quenching due to the formation of AR-BSA complex, with binding constant (K) ranging from 3.26±0.09 to 8.08±0.0610(4)L.mol(-1), at the warfarin binding site of BSA. This complex formation was driven by increasing entropy. Isothermal titration calorimetric measurements also showed an enthalpic contribution. The Allura Red diffusion coefficient determined by the Taylor-Aris technique corroborated these results because it reduced with increasing BSA concentration. Interfacial tension measurements showed that the AR-BSA complex presented surface activity, since interfacial tension of the water-air interface decreased as the colorant concentration increased. This technique also provided a complexation stoichiometry similar to those obtained by fluorimetric experiments. This work contributes to the knowledge of interactions between BSA and azo colorants under physiological conditions.

Effects of nisin on Staphylococcus aureus count and physicochemical properties of Minas Frescal cheese

The aim of this work was to evaluate the effects of nisin on in vitro and in situ Staphylococcus aureus counts. For in vitro experiment, milk was inoculated with 5.0 log cfu·mL(-1) of S. aureus and nisin was added at concentrations of 0, 100, 200, 400, and 500 IU mL(-1). The main effect of the bacteriocin was lag phase extension from 0h, for 0 and 100 IU·mL(-1) to 8h, when 200, 400, and 500 IU·mL(-1) of nisin were used; however, log phase was not affected. Microbial growth rate was found to be exponential and around 0.11 log cfu·mL(-1)·h(-1) for all treatments. For in situ experiments, 0, 400, and 500 IU·mL(-1) of nisin were directly added to pasteurized milk previously inoculated with 5.0 log cfu·g(-1) of S. aureus. Milk, curd, and whey were analyzed to S. aureus counts. Nisin at concentration of 500 IU·mL(-1) was able to reduce S. aureus count in curd and whey, demonstrating nisin partition between both phases. Throughout storage at 4°C, S. aureus count increased for all treatments, but the bacterial grew slower when nisin was added in both concentrations, maintaining S. aureus count about 1.5 log cycles lower than the control, despite abusive initial S. aureus count. Therefore, nisin seems to play an important role in reducing S. aureus initial count in cheese made with highly contaminated milk. Nisin showed potential to be used as an additional, important hurdle to improve Minas Frescal cheese safety, without replacing good manufacturing practices.

WORK OF ADHESION OF DAIRY PRODUCTS ON STAINLESS STEEL SURFACE

The adhesion of the solids presents in food can difficult the process of surface cleaning and promotes the bacterial adhesion process and can trigger health problems. In our study, we used UHT whole milk, chocolate based milk and infant formula to evaluate the adhesion of Enterobacter sakazakii on stainless steel coupons, and we determine the work of adhesion by measuring the contact angle as well as measured the interfacial tension of the samples. In addition we evaluated the hydrophobicity of stainless steel after pre-conditioning with milk samples mentioned. E. sakazakii was able to adhere to stainless steel in large numbers in the presence of dairy products. The chocolate based milk obtained the lower contact angle with stainless steel surface, higher interfacial tension and consequently higher adhesion work. It was verified a tendency of decreasing the interfacial tension as a function of the increasing of protein content. The preconditioning of the stainless steel coupons with milk samples changed the hydrophobic characteristics of the surfaces and became them hydrophilic. Therefore, variations in the composition of the milk products affect parameters important that can influence the procedure of hygiene in surface used in food industry.

Polydiacetylene/triblock copolymer nanoblend applied as a sensor for micellar casein: A thermodynamic approach

Polydiacetylene (PDA) and triblock copolymer nanoblends were synthesized to detect micellar casein (MC), the main milk protein and an indicator of milk quality. UV-Vis spectrum showed that MC induced blue-to-red transition in nanoblends. When nanoblends and MC were separated by dialysis membrane colorimetric response (CR) was similar, whereas a remarkable CR reduction was noticed after addition of dialyzed-MC, suggesting that small molecules present in MC (salts) caused PDA color change. Interaction enthalpy variation between nanoblends and MC showed an abrupt increase that coincided with MC concentration when colorimetric transition occurred. Copolymer hydrophobic/hydrophilic balance and presence of other molecules in the system affected nanoblends CR. MC salts were found to interact with nanoblends leading to color changes. MC concentration, MC salt release, copolymer hydrophobic/hydrophilic balance, and presence of other molecules in the system affected responses of the sensors. These results contribute to future applications of PDA/copolymer nanosensors to dairy models.

Probiotics in Dairy Fermented Products

Interest in the role of probiotics for human health began as early as 1908 when Metchnikoff associated the intake of fermented milk with prolonged life (Lourens-Hattingh and Vilijoen, 2001b). However, the relationship between intestinal microbiota and good health and nutrition has only recently been investigated. Therefore, it was not until the 1960’s that health benefit claims began appearing on foods labels.