Ana Garcia-Prieto

Magnetic Tagging Increases Delivery of Circulating Progenitors in Vascular Injury

OBJECTIVES We sought to magnetically tag endothelial progenitor cells (EPCs) with a clinical agent and target them to a site of arterial injury using a magnetic device positioned outside the body. BACKGROUND Circulating EPCs are involved in physiological processes such as vascular re-endothelialization and post-ischemic neovascularization. However, the success of cell therapies depends on the ability to deliver the cells to the site of injury. METHODS Human EPCs were labeled with iron oxide superparamagnetic nanoparticles. Cell viability and differentiation were tested using flow cytometry. Following finite element modeling computer simulations and flow testing in vitro, angioplasty was performed on rat common carotid arteries to denude the endothelium and EPCs were administered with and without the presence of an external magnetic device for 12 min. RESULTS Computer simulations indicated successful external magnetic cell targeting from a vessel with flow rate similar to a rat common carotid artery; correspondingly there was a 6-fold increase in cell capture in an in vitro flow system. Targeting enhanced cell retention at the site of injury by 5-fold at 24 h after implantation in vivo. CONCLUSIONS Using an externally applied magnetic device, we have been able to enhance EPC localization at a site of common carotid artery injury. This technology could be more widely adapted to localize cells in other organs and may provide a useful tool for the systemic injection of cell therapies.

Magnetite biomineralization in Magnetospirillum gryphiswaldense: time-resolved magnetic and structural studies.

Magnetotactic bacteria biosynthesize magnetite nanoparticles of high structural and chemical purity that allow them to orientate in the geomagnetic field. In this work we have followed the process of biomineralization of these magnetite nanoparticles. We have performed a time-resolved study on magnetotactic bacteria Magnetospirillum gryphiswaldense strain MSR-1. From the combination of magnetic and structural studies by means of Fe K-edge X-ray absorption near edge structure (XANES) and high-resolution transmission electron microscopy we have identified and quantified two phases of Fe (ferrihydrite and magnetite) involved in the biomineralization process, confirming the role of ferrihydrite as the source of Fe ions for magnetite biomineralization in M. gryphiswaldense. We have distinguished two steps in the biomineralization process: the first, in which Fe is accumulated in the form of ferrihydrite, and the second, in which the magnetite is rapidly biomineralized from ferrihydrite. Finally, the XANES analysis suggests that the origin of the ferrihydrite could be at bacterial ferritin cores, characterized by a poorly crystalline structure and high phosphorus content.

Magnetic cell delivery for peripheral arterial disease: A theoretical framework

PURPOSE Our aim was to compare different magnet arrangements for magnetic cell delivery to human lower leg arteries and investigate the theoretical targeting efficiency under realistic flow conditions as a possible treatment after angioplasty. Additionally the potential of scaling down or translating the magnetic actuation device for preclinical studies was explored. METHODS Using finite element methods, the magnetic field distribution was calculated in 3D for the optimization of magnet arrangements. Computational fluid dynamics simulations were performed for the human posterior tibial artery with the geometry and boundary condition data derived from magnetic resonance imaging (MRI) studies. These simulations were used to trace the trajectories of cells for an optimized magnet arrangement. Additionally the behavior of cells close to the vessel wall was investigated using a fluid-structure interaction model. RESULTS The optimal magnet for the lower leg arteries was a Halbach cylinder k3 variety (12 elements with 900 rotation steps for the magnetization orientation). With this magnet, numerical simulations predict a targeting efficiency of 6.25% could be achieved in the posterior tibial artery for cells containing 150 pg iron. Similar simulations, which were scaled down to rabbit dimensions while keeping the forces acting on a cell constant, lead to similar predicted targeting efficiencies. Fluid dynamic and fluid-structure interaction simulations predict that magnetically labeled cells within a 0.5% radii distance to the vessel wall would be attracted and remain at the wall under physiological flow conditions. CONCLUSIONS First pass capture of magnetically labeled cells under pulsatile flow conditions in human lower leg arteries leads to low targeting efficiencies. However, this can be increased to almost 100% by stopping the blood flow for 5 min. A magnetic actuation device can be designed for animal models that generate magnetic forces achievable for cells in human leg arteries.

Safety implications of high-field MRI: actuation of endogenous magnetic iron oxides in the human body.

Background Magnetic Resonance Imaging scanners have become ubiquitous in hospitals and high-field systems (greater than 3 Tesla) are becoming increasingly common. In light of recent European Union moves to limit high-field exposure for those working with MRI scanners, we have evaluated the potential for detrimental cellular effects via nanomagnetic actuation of endogenous iron oxides in the body. Methodology Theoretical models and experimental data on the composition and magnetic properties of endogenous iron oxides in human tissue were used to analyze the forces on iron oxide particles. Principal Finding and Conclusions Results show that, even at 9.4 Tesla, forces on these particles are unlikely to disrupt normal cellular function via nanomagnetic actuation.

Structure and magnetic properties in CoCu granular alloys

Abstract Granular alloys, composed of magnetic clusters embedded in non-magnetic metallic matrices, can develop giant magnetoresistance effect after suitable preparation and thermal treatments. The structural effect of annealing on the structure of Co10Cu90 samples has been directly probed by in situ time resolved X-ray diffraction (TR-XRD) during thermal treatment. TR-XRD definitively proves the occurrence of an anomalous behaviour in the thermally activated segregation process that is related to the evolution of magnetotransport properties in these materials.

Breakdown of magnetism in sub-nanometric Ni clusters embedded in Ag

Downsizing to the nanoscale has opened up a spectrum of new magnetic phenomena yet to be discovered. In this context, we investigate the magnetic properties of Ni clusters embedded in a metallic Ag matrix. Unlike in Ni free-standing clusters, where the magnetic moment increases towards the atomic value when decreasing the cluster size, we show, by tuning the Ni cluster size down to the sub-nanoscale, that there is a size limit below which the clusters become non-magnetic when embedded in Ag. To this end, we have fabricated by DC-sputtering a system composed of sub-nanometer sized and non interacting Ni clusters embedded into a Ag matrix. A thorough experimental characterization by means of structural techniques (x-ray diffraction, x-ray absorption spectroscopy) and DC-magnetization confirms that the cluster size is in the sub-nanometric range and shows that the magnetization of the system is dramatically reduced, reaching only 38% of the bulk value. The experimental system has been reproduced by density functional theory calculations on Ni m clusters (m = 1-6, 10 and 13) embedded in Ag. The combination of the experimental and theoretical analysis points out that there is a breakdown of magnetism occurring below a cluster size of six atoms. According to our results, the loss of magnetic moment is not due to Ag-Ni hybridization but to charge transfer between the Ni sp and d orbitals, and the reduced magnetization observed experimentally is explained on the basis of the presence of a narrow cluster size-distribution where magnetic and non-magnetic clusters coexist.

Configuration of the magnetosome chain: a natural magnetic nanoarchitecture

Magnetospirillum gryphiswaldense is a microorganism with the ability to biomineralize magnetite nanoparticles, called magnetosomes, and arrange them into a chain that behaves like a magnetic compass. Rather than straight lines, magnetosome chains are slightly bent, as evidenced by electron cryotomography. Our experimental and theoretical results suggest that due to the competition between the magnetocrystalline and shape anisotropies, the effective magnetic moment of individual magnetosomes is tilted out of the [111] crystallographic easy axis of magnetite. This tilt does not affect the direction of the chain net magnetic moment, which remains along the [111] axis, but explains the arrangement of magnetosomes in helical-like shaped chains. Indeed, we demonstrate that the chain shape can be reproduced by considering an interplay between the magnetic dipolar interactions between magnetosomes, ruled by the orientation of the magnetosome magnetic moment, and a lipid/protein-based mechanism, modeled as an elastic recovery force exerted on the magnetosomes.

Magnetic cell delivery for peripheral arterial disease: A theoretical framework: Magnetic cell delivery to lower leg arteries

PURPOSE Our aim was to compare different magnet arrangements for magnetic cell delivery to human lower leg arteries and investigate the theoretical targeting efficiency under realistic flow conditions as a possible treatment after angioplasty. Additionally the potential of scaling down or translating the magnetic actuation device for preclinical studies was explored. METHODS Using finite element methods, the magnetic field distribution was calculated in 3D for the optimization of magnet arrangements. Computational fluid dynamics simulations were performed for the human posterior tibial artery with the geometry and boundary condition data derived from magnetic resonance imaging (MRI) studies. These simulations were used to trace the trajectories of cells for an optimized magnet arrangement. Additionally the behavior of cells close to the vessel wall was investigated using a fluid-structure interaction model. RESULTS The optimal magnet for the lower leg arteries was a Halbach cylinder k3 variety (12 elements with 900 rotation steps for the magnetization orientation). With this magnet, numerical simulations predict a targeting efficiency of 6.25% could be achieved in the posterior tibial artery for cells containing 150 pg iron. Similar simulations, which were scaled down to rabbit dimensions while keeping the forces acting on a cell constant, lead to similar predicted targeting efficiencies. Fluid dynamic and fluid-structure interaction simulations predict that magnetically labeled cells within a 0.5% radii distance to the vessel wall would be attracted and remain at the wall under physiological flow conditions. CONCLUSIONS First pass capture of magnetically labeled cells under pulsatile flow conditions in human lower leg arteries leads to low targeting efficiencies. However, this can be increased to almost 100% by stopping the blood flow for 5 min. A magnetic actuation device can be designed for animal models that generate magnetic forces achievable for cells in human leg arteries.

Magnetic cell delivery for peripheral arterial disease

PURPOSE Our aim was to compare different magnet arrangements for magnetic cell delivery to human lower leg arteries and investigate the theoretical targeting efficiency under realistic flow conditions as a possible treatment after angioplasty. Additionally the potential of scaling down or translating the magnetic actuation device for preclinical studies was explored. METHODS Using finite element methods, the magnetic field distribution was calculated in 3D for the optimization of magnet arrangements. Computational fluid dynamics simulations were performed for the human posterior tibial artery with the geometry and boundary condition data derived from magnetic resonance imaging (MRI) studies. These simulations were used to trace the trajectories of cells for an optimized magnet arrangement. Additionally the behavior of cells close to the vessel wall was investigated using a fluid-structure interaction model. RESULTS The optimal magnet for the lower leg arteries was a Halbach cylinder k3 variety (12 elements with 900 rotation steps for the magnetization orientation). With this magnet, numerical simulations predict a targeting efficiency of 6.25% could be achieved in the posterior tibial artery for cells containing 150 pg iron. Similar simulations, which were scaled down to rabbit dimensions while keeping the forces acting on a cell constant, lead to similar predicted targeting efficiencies. Fluid dynamic and fluid-structure interaction simulations predict that magnetically labeled cells within a 0.5% radii distance to the vessel wall would be attracted and remain at the wall under physiological flow conditions. CONCLUSIONS First pass capture of magnetically labeled cells under pulsatile flow conditions in human lower leg arteries leads to low targeting efficiencies. However, this can be increased to almost 100% by stopping the blood flow for 5 min. A magnetic actuation device can be designed for animal models that generate magnetic forces achievable for cells in human leg arteries.