Ana L. Daniel-da-Silva

Silica coated magnetite particles for magnetic removal of Hg2+ from water

The magnetic removal of Hg(2+) from water has been assessed using silica coated magnetite particles. The magnetite particles were first prepared by hydrolysis of FeSO(4) and their surfaces were modified with amorphous silica shells that were then functionalized with organic moieties containing terminal dithiocarbamate groups. Under the experimental conditions used, the materials reported here displayed high efficiency for Hg(2+) uptake (74%) even at contaminant levels as low as 50 μg l(-1). Therefore these eco-nanomagnets show great potential for the removal of heavy metal ions of polluted water, via magnetic separation.

Supported ionic liquid silica nanoparticles (SILnPs) as an efficient and recyclable heterogeneous catalyst for the dehydration of fructose to 5-hydroxymethylfurfural

Supported ionic liquid nanoparticles (SILnPs) having particle size ranging from 293 ± 2 to 610 ± 11 nm have been prepared by immobilization of ionic liquid, 1-(tri-ethoxy silyl-propyl)-3-methyl-imidazolium hydrogen sulfate (IL-HSO4) on the surface of silica nanoparticles. The catalytic activity of the prepared SILnPs was investigated for the dehydration of fructose to 5-hydroxymethylfurfural (HMF) in the presence of dimethylsulfoxide (DMSO) as a solvent. The reaction temperature and amount of catalyst have been optimized for dehydration of fructose over SILnPs using experimental design leading to 99.9% fructose conversion and 63.0% HMF yield using silica SILnPs (d = 610 ± 11) nm at 130.0 °C in 30 min reaction time. The SILnPs catalysts developed in this study present improved performances over other zeolites and strong acid ion exchange resin catalysts, and they have been efficiently and very easily recycled over seven times without any significant loss in fructose conversion and HMF yield.

Removal of mercury (II) by dithiocarbamate surface functionalized magnetite particles: Application to synthetic and natural spiked waters

In order to take advantage of the high affinity between mercury and sulphur, magnetite (Fe(3)O(4)) particles functionalized with dithiocarbamate groups (CS(2)(-)), were synthesized to be used as a new type of sorbent to remove Hg (II) from synthetic and natural spiked waters. The effectiveness of this type of sorbent was studied, and its potential as cleanup agent for contaminated waters was assessed. Batch stirred tank experiments were carried out by contacting a volume of solution with known amounts of functionalized Fe(3)O(4) particles, in order to study the effect of sorbent dose, salinity, and the kinetics and the equilibrium of this unit operation. A complete Hg (II) removal (ca. 99.8%) was attained with 6 mg/L of magnetic particles for an initial metal concentration of 50 μg/L. It was confirmed that highly complex matrices, such as seawater (ca. 99%) and river water (ca. 97%), do not affect the removal capacity of the functionalized magnetic particles. Concerning isotherms, no significant differences were observed between two- and three-parameter models (P = 0.05%); however, Sips isotherm provided the lowest values of SS and S(x/y), predicting a maximum sorption capacity of 206 mg/g, in the range of experimental conditions under study. The solid loadings measured in this essay surmount the majority of the values found in literature for other type of sorbents.

Synthesis and optimization of lectin functionalized nanoprobes for the selective recovery of glycoproteins from human body fluids.

Biomedical sciences, and in particular biomarker research, demand efficient glycoprotein enrichment platforms. Herein magnetic nanoprobes (MNP), after being coated with three broad-spectrum lectins-concanavalin A (ConA), wheat germ agglutinin (WGA), and Maackia amurensis lectin (MA)-were utilized to selectively capture glycoproteins from human body fluids. Additionally, a new methodology, based on protection of the lectins with their target sugars prior to coupling with MNPs, was proposed to overcome the nonspecific nature of conjugation. This approach contributed to preserve lectin conformation, increasing by 40% and 90% the affinity of ConA and MA for glycoproteins in relation to synthesis with nonprotected lectins. Optimal operating conditions (temperature, time) and maximum binding capacities were further determined for each lectin by use of fetuin as a reference. The enhanced performance of lectin-based nanoplatforms was demonstrated by comparing MNP@ConA with conventional Sepharose@ConA. These experiments have shown that ConA immobilized on MNP exhibited 5 times higher affinity for fetuin and ovalbumin when compared with Sepharose@ConA with the same amount of immobilized lectin. MNP@Lectins were then applied to human serum, saliva, and urine and the recovered proteins were digested with trypsin and analyzed by nano-HPLC MALDI-TOF/TOF. This allowed the identification of 180 proteins, 90% of which were found to be glycosylated by use of bioinformatics tools, therefore revealing low levels of unspecific binding. Thus, MNP@lectins have proved to be a valuable tool for glycoproteomic studies, particularly when dealing with minute amounts of material.

κ-Carrageenan hydrogel nanocomposites with release behavior mediated by morphological distinct Au nanofillers.

In this work we investigate the effect of spherical and rod-shaped Au nanoparticles (NPs) in the microstructure, thermomechanical and release properties of thermosensitive κ-carrageenan hydrogels. Thermal and mechanical analyses of the composites revealed that the Au NPs reinforce the structure of the hydrogel and the mechanism of gel reinforcement is discussed. The effect of the NPs on the microstructure and strength of the hydrogel had implications in the mechanism of controlled release as demonstrated by in vitro release studies using a drug model (methylene blue: MB). Noteworthy, the mechanism of MB release followed either a diffusion or polymer relaxation mechanism, depending on the morphology of the Au NPs incorporated in the hydrogel. Consequently, κ-carrageenan hydrogels containing Au NPs exhibited not only optical features modulated by the fillers morphology, but also showed a behavior as drug carriers that can be also adjusted by Au NPs characteristics.

Synthesis and swelling behavior of temperature responsive κ-carrageenan nanogels

Crosslinked κ-carrageenan hydrogel nanoparticles (nanogels) with an average size smaller than 100 nm were prepared using reverse microemulsions combined with thermally induced gelation. The size of the nanogels varied with biopolymer concentration at a constant water/surfactant concentration ratio. The nanogels were found to be thermo-sensitive in a temperature range acceptable for living cells (37-45°C) undergoing reversible volume transitions in response to thermal stimuli. This opens the possibility to explore the application of these nanogels in smart therapeutics such as thermo-sensitive drug carriers. As such, the sustained release of methylene blue from the nanogels was evaluated in in vitro conditions as proof of concept experiments and the release rate was found to be controlled with temperature.

Efficient sorbents based on magnetite coated with siliceous hybrid shells for removal of mercury ions

New sorbents based on magnetite particles coated with siliceous shells were synthesized and tested in the removal of mercury ions from aqueous solutions by magnetic separation. Atomic fluorescence spectroscopy studies performed on water samples treated with these sorbents have shown that the metal ion concentration decreased to values lower than the guideline values for drinking water. The high adsorption affinity for mercury ions in these materials was attributed to dithiocarbamate groups grafted over the siliceous domains using a new surface modification method. Hence, the magnetic particles have been coated with amorphous silica shells that include thiolate moieties via a hydrolytic co-condensation process using tetraethoxysilane (TEOS) and siloxydithiocarbamate (SiDTC) as the sol–gel precursors. This one-step method for the surface modification of magnetite particles led to sorbents with extensive thiolate moieties that can be then collected by applying an external magnetic field.

Tailoring the morphology of high molecular weight PLLA scaffolds through bioglass addition

Thermally induced phase separation (TIPS) has proven to be a suitable method for the preparation of porous structures for tissue engineering applications, and particular attention has been paid to increasing the pore size without the use of possible toxic surfactants. Within this context, an alternative method to control the porosity of polymeric scaffolds via the combination with a bioglass is proposed in this work. The addition of a bioactive glass from the 3CaO x P2O5-MgO-SiO2 system enables the porous structure of high molecular weight poly(l-lactic) acid (PLLA) scaffolds prepared by TIPS to be tailored. Bioglass acts as a nucleating catalyst agent of the PLLA matrix, promoting its crystallization, and the glass solubility controls the pore size. A significant increase in the pore size is observed as the bioglass content increases and scaffolds with large pore size (approximately 150 microm) can be prepared. In addition, the bioactive character of the scaffolds is proved by in vitro tests in synthetic plasma. The importance of this approach resides on the combination of the ability to tailor the porosity of polymeric scaffolds via the tunable solubility of bioglasses, without the use of toxic surfactants, leading to a composite structure with suitable properties for bone tissue engineering applications.

Biofunctionalized magnetic hydrogel nanospheres of magnetite and κ-carrageenan

Magnetic hydrogel kappa-carrageenan nanospheres were successfully prepared via water-in-oil (w/o) microemulsions combined with thermally induced gelation of the polysaccharide. The size of the nanospheres (an average diameter of about 50 and 75 nm) was modulated by varying the concentration of surfactant. The nanospheres contained superparamagnetic magnetite nanoparticles (average diameter 8 nm), previously prepared by co-precipitation within the biopolymer. Carboxyl groups, at a concentration of about 4 mmol g(-1), were successfully grafted at the surface of these magnetic nanospheres via carboxymethylation of the kappa-carrageenan. The carboxylated nanospheres were shown to be thermo-sensitive in the 37-45 degrees C temperature range, indicating their potential as thermally controlled delivery systems for drugs and/or magnetic particles at physiological temperatures. Finally, preliminary results have been obtained for IgG antibody conjugation of the carboxylated nanospheres and the potential of these systems for bio-applications is discussed.

The influence of Citrate or PEG coating on silver nanoparticle toxicity to a human keratinocyte cell line

Surface coating of silver nanoparticles may influence their toxicity, in a way yet to decipher. In this study, human keratinocytes (HaCaT cells) were exposed for 24 and 48h to well-characterized 30nm AgNPs coated either with citrate (Cit30 AgNPs) or with poly(ethylene glycol) (PEG30 AgNPs), and assessed for cell viability, reactive oxygen species (ROS), cytokine release, apoptosis and cell cycle dynamics. The results showed that Cit30 AgNPs and PEG30 AgNPs decreased cell proliferation and viability, the former being more cytotoxic. The coating molecules per se were not cytotoxic. Moreover, Ag(+) release and ROS production were similar for both AgNP types. Cit30 AgNPs clearly induced apoptotic death, while cells exposed to PEG30 AgNPs appeared to be at an earlier phase of apoptosis, supported by changes in BAX, BCL2 and CASP-3 expressions. Concerning the impact on cell cycle dynamics, both Cit30 and PEG30 AgNPs affected cell cycle regulation of HaCaT cells, but, again, citrate-coating induced more drastic effects, showing earlier downregulation of cyclin B1 gene and cellular arrest at the G2 phase. Overall, this study has shown that the surface coating of AgNPs influences their toxicity by differently regulating cell-cycle and cell death mechanisms.