Ana M.C. Barradas

Osteoinductive ceramics as a synthetic alternative to autologous bone grafting

Biomaterials can be endowed with biologically instructive properties by changing basic parameters such as elasticity and surface texture. However, translation from in vitro proof of concept to clinical application is largely missing. Porous calcium phosphate ceramics are used to treat small bone defects but in general do not induce stem cell differentiation, which is essential for regenerating large bone defects. Here, we prepared calcium phosphate ceramics with varying physicochemical and structural characteristics. Microporosity correlated to their propensity to stimulate osteogenic differentiation of stem cells in vitro and bone induction in vivo. Implantation in a large bone defect in sheep unequivocally demonstrated that osteoinductive ceramics are equally efficient in bone repair as autologous bone grafts. Our results provide proof of concept for the clinical application of “smart” biomaterials.

A calcium-induced signaling cascade leading to osteogenic differentiation of human bone marrow-derived mesenchymal stromal cells

The response of osteoprogenitors to calcium (Ca(2+)) is of primary interest for both normal bone homeostasis and the clinical field of bone regeneration. The latter makes use of calcium phosphate-based bone void fillers to heal bone defects, but it is currently not known how Ca(2+) released from these ceramic materials influences cells in situ. Here, we have created an in vitro environment with high extracellular Ca(2+) concentration and investigated the response of human bone marrow-derived mesenchymal stromal cells (hMSCs) to it. Ca(2+) enhanced proliferation and morphological changes in hMSCs. Moreover, the expression of osteogenic genes is highly increased. A 3-fold up-regulation of BMP-2 is observed after only 6h and pharmaceutical interference with a number of proteins involved in Ca(2+) sensing showed that not the calcium sensing receptor, but rather type L voltage-gated calcium channels are involved in mediating the signaling pathway between extracellular Ca(2+) and BMP-2 expression. MEK1/2 activity is essential for the effect of Ca(2+) and using microarray analysis, we have identified c-Fos as an early Ca(2+) response gene. We have demonstrated that hMSC osteogenesis can be induced via extracellular Ca(2+), a simple and economic way of priming hMSCs for bone tissue engineering applications.

Development and analysis of multi-layer scaffolds for tissue engineering

The development of 3D scaffolds consisting of stacked multi-layered porous sheets featuring microchannels is proposed and investigated in this work. In this concept, the inner-porosity of the sheets allows diffusion of nutrients and signalling products between the layers whereas the microchannels facilitate nutrient supply on all layers as they provide space for the culture medium to be perfused throughout the scaffold. Besides the above, these scaffolds have excellent distribution of the cells as seeding and attaching of the cells occurs on individual layers that are subsequently stacked. In addition, these scaffolds enable gaining local data from within the scaffolds as unstacking of the stacked layers allows for determination of various parameters per layer. Here, we show the proof of this concept by culturing C2C12 pre-myoblasts and A4-4 cells on stacked Poly(l-lactic acid) (PLLA) sheets featuring microchannels. The results obtained for culturing under static conditions clearly indicate that despite inhibited cell proliferation due to nutrient limitations, diffusion between the layers takes place and cells on various layers stay viable and also affect each other. Under dynamic conditions, medium flow through the channels improves nutrient availability to the cells on the various layers, drastically increasing cell proliferation on all layers.

The size of surface microstructures as an osteogenic factor in calcium phosphate ceramics

The microporosity of calcium phosphate (CaP) ceramics has been shown to have an essential role in osteoinduction by CaP ceramics after ectopic implantation. Here we show that it is not the microporosity but the size of surface microstructural features that is the most likely osteogenic factor. Two tricalcium phosphate (TCP) ceramics, namely TCP-S and TCP-B, were fabricated with equivalent chemistry and similar microporosity but different sizes of surface microstructural features. TCP-S has a grain size of 0.99 ± 0.20 μm and a micropore size of 0.65 ± 0.25 μm, while TCP-B displays a grain size of 3.08 ± 0.52 μm and a micropore size of 1.58 ± 0.65 μm. In vitro, both cell proliferation and osteogenic differentiation were significantly enhanced when human bone marrow stromal cells were cultured on TCP-S without any osteogenic growth factors, compared to TCP-B ceramic granules. The possible involvement of direct contact between cells and the TCP ceramic surface in osteogenic differentiation is also shown with a trans-well culture model. When the ceramic granules were implanted in paraspinal muscle of dogs for 12 weeks, abundant bone was formed in TCP-S (21 ± 10% bone in the available space), whereas no bone was formed in any of the TCP-B implants. The current in vitro and in vivo data reveal that the readily controllable cue, i.e. the size of the surface microstructure, could be sufficient to induce osteogenic differentiation of mesenchymal stem cells, ultimately leading to ectopic bone formation in calcium phosphate ceramics.

Combining technologies to create bioactive hybrid scaffolds for bone tissue engineering

Combining technologies to engineer scaffolds that can offer physical and chemical cues to cells is an attractive approach in tissue engineering and regenerative medicine. In this study, we have fabricated polymer-ceramic hybrid scaffolds for bone regeneration by combining rapid prototyping (RP), electrospinning (ESP) and a biomimetic coating method in order to provide mechanical support and a physico-chemical environment mimicking both the organic and inorganic phases of bone extracellular matrix (ECM). Poly(ethylene oxide terephthalate)-poly(buthylene terephthalate) (PEOT/PBT) block copolymer was used to produce three dimensional scaffolds by combining 3D fiber (3DF) deposition, and ESP, and these constructs were then coated with a Ca-P layer in a simulated physiological solution. Scaffold morphology and composition were studied using scanning electron microscopy (SEM) coupled to energy dispersive X-ray analyzer (EDX) and Fourier Tranform Infrared Spectroscopy (FTIR). Bone marrow derived human mesenchymal stromal cells (hMSCs) were cultured on coated and uncoated 3DF and 3DF + ESP scaffolds for up to 21 d in basic and mineralization medium and cell attachment, proliferation, and expression of genes related to osteogenesis were assessed. Cells attached, proliferated and secreted ECM on all the scaffolds. There were no significant differences in metabolic activity among the different groups on days 7 and 21. Coated 3DF scaffolds showed a significantly higher DNA amount in basic medium at 21 d compared with the coated 3DF + ESP scaffolds, whereas in mineralization medium, the presence of coating in 3DF+ESP scaffolds led to a significant decrease in the amount of DNA. An effect of combining different scaffolding technologies and material types on expression of a number of osteogenic markers (cbfa1, BMP-2, OP, OC and ON) was observed, suggesting the potential use of this approach in bone tissue engineering.

The influence of genetic factors on the osteoinductive potential of calcium phosphate ceramics in mice.

The efficacy of calcium phosphate (CaP) ceramics in healing large bone defects is, in general, not as high as that of autologous bone grafting. Recently, we reported that CaP ceramics with osteoinductive properties were as efficient in healing an ilium defect of a sheep as autologous bone graft was, which makes this subclass of CaP ceramics a powerful alternative for bone regeneration. Although osteoinduction by CaP ceramics has been shown in several large animal models it is sporadically reported in mice. Because the lack of a robust mouse model has delayed understanding of the mechanism, we screened mice from 11 different inbred mouse strains for their responsiveness to subcutaneous implantation of osteoinductive tricalcium phosphate (TCP). In only two strains (FVB and 129S2) the ceramic induced bone formation, and in particularly, in FVB mice, bone was found in all the tested mice. We also demonstrated that other CaP ceramics induced bone formation at the same magnitude as that observed in other animal models. Furthermore, VEGF did not significantly increase TCP induced bone formation. The mouse model here described can accelerate research of osteoinductive mechanisms triggered by CaP ceramics and potentially the development of therapies for bone regeneration.

Surface modifications by gas plasma control osteogenic differentiation of MC3T3-E1 cells.

Numerous studies have shown that the physicochemical properties of biomaterials can control cell activity. Cell adhesion, proliferation, differentiation as well as tissue formation in vivo can be tuned by properties such as the porosity, surface micro- and nanoscale topography and chemical composition of biomaterials. This concept is very appealing for tissue engineering since instructive properties in bioactive materials can be more economical and time efficient than traditional strategies of cell pre-differentiation in vitro prior to implantation. The biomaterial surface, which is easy to modify due to its accessibility, may provide the necessary signals to elicit a certain cellular behavior. Here, we used gas plasma technology at atmospheric pressure to modify the physicochemical properties of polylactic acid and analyzed how this influenced pre-osteoblast proliferation and differentiation. Tetramethylsilane and 3-aminopropyl-trimethoxysilane with helium as a carrier gas or a mixture of nitrogen and hydrogen were discharged to polylactic acid discs to create different surface chemical compositions, hydrophobicity and microscale topographies. Such modifications influenced protein adsorption and pre-osteoblast cell adhesion, proliferation and osteogenic differentiation. Furthermore polylactic acid treated with tetramethylsilane enhanced osteogenic differentiation compared to the other surfaces. This promising surface modification could be further explored for potential development of bone graft substitutes.

High content imaging in the screening of biomaterial-induced MSC behavior

Upon contact with a biomaterial, cells and surrounding tissues respond in a manner dictated by the physicochemical and mechanical properties of the material. Traditionally, cellular responses are monitored using invasive analytical methods that report the expression of genes or proteins. These analytical methods involve assessing commonly used markers for a predefined readout, masking the actual situation induced in the cells. Hence, a broader expression profile of the cellular response should be envisioned, which technically limits up scaling to higher throughput systems. However, it is increasingly recognized that morphometric readouts, obtained non-invasively, are related to gene expression patterns. Here, we introduced distinct surface roughness to three PLA surfaces, by exposure to oxygen plasma of different duration times. The response of mesenchymal stromal cells was compared to smooth untreated PLA surfaces without the addition of differentiation agents. Morphological and genome wide expression profiles revealed underlying cellular changes which was hidden for the commonly used gene markers for osteo-, chondro- and adipogenesis. Using 3 morphometric parameters, obtained by high content imaging, we were able to build a classifier and discriminate between oxygen plasma-induced modified sheets and non-modified PLA sheets where evaluating classical candidates missed this effect. This approach shows the feasibility to use noninvasive morphometric data in high-throughput systems to screen biomaterial surfaces indicating the underlying genetic biomaterial-induced changes.

CELL AGGREGATION ENHANCES BONE FORMATION BY HUMAN MESENCHYMAL STROMAL CELLS

The amount of bone generated using current tissue engineering approaches is insufficient for many clinical applications. Previous in vitro studies suggest that culturing cells as 3D aggregates can enhance their osteogenic potential, but the effect on bone formation in vivo is unknown. Here, we use agarose wells to generate uniformly sized mesenchymal stromal cell (MSC) aggregates. When combined with calcium phosphate ceramic particles and a gel prepared from human platelet-rich plasma, we generated a tissue engineered construct which significantly improved in vivo bone forming capacity as compared to the conventional system of using single cells seeded directly on the ceramic surface. Histology demonstrated the reproducibility of this system, which was tested using cells from four different donors. In vitro studies established that MSC aggregation results in an up-regulation of osteogenic transcripts. And finally, the in vivo performance of the constructs was significantly diminished when unaggregated cells were used, indicating that cell aggregation is a potent trigger of in vivo bone formation by MSCs. Cell aggregation could thus be used to improve bone tissue engineering strategies.