Ana M. Diaz-Arnold

Influence of post dimension on stress distribution in dentin

Stress distribution studies can be helpful in determining the appropriate diameter and length of endodontic posts for specific teeth in select occlusal relationships. This study selected the finite element method to predict distribution of stresses in dentin of an endodontically treated tooth restored with cast post and cores with various post dimensions. Peak dentinal shear stresses occurred adjacent to the post at mid-root. Peak shear stresses were elevated as the length of the post decreased. Peak dentinal tensile stresses occurred in the gingival third of the facial root surface, whereas peak dentinal compressive stresses were evident in the gingival third of the lingual root surface. The distribution of tensile and compressive stresses was not affected with variation in the dimensions of the posts.

Current status of luting agents for fixed prosthodontics

STATEMENT OF THE PROBLEM The long-term clinical outcome of fixed prosthodontic treatment depends, in part, on the use of adhesives that can provide an impervious seal between the restoration and the tooth. There are several types of available luting agents, each possessing unique properties and handling characteristics. No one product is ideal for every type of restoration. PURPOSE The purpose of this article is to review available dental luting agents, discuss improvements and drawbacks in newly formulated adhesives, and present the indications for their use. RESULTS Each cement type is physically and chemically unique. A single adhesive will not suffice in modern day clinical practice.

Clinical assessment of high-strength all-ceramic crowns ☆

STATEMENT OF PROBLEM All-ceramic crowns are being used extensively. Little data are available on their clinical performance. PURPOSE This study evaluated the clinical performance of In-Ceram (Vita Zahnfabrik) crowns. MATERIAL AND METHODS Forty-one patients (16 men, 25 women; mean age 47.3 years, range 18 to 77 years) were examined with a total of 80 In-Ceram all-ceramic crowns fabricated at the University of Iowa College of Dentistry from 1994 to 1997. The percentage distribution for crowns included: 67% anterior single crowns, 26% posterior single crowns, 6% anterior implant crowns, and 1% posterior implant crowns. This study documented the integrity of the junction between crown and tooth, color match to adjacent teeth, secondary dental caries, wear of crown and opposing dentition, and visible cracks in the crown. Alpha, Bravo, and Charlie ratings were assigned with a modified USPHS criteria. The patients were also surveyed with respect to oral hygiene and satisfaction of treatment. Estimations of 4-year success rates and corresponding confidence intervals were calculated by fitting a constant hazard function model with the SAS procedure GENMOD. RESULTS Marginal integrity for 88% of artificial crowns was rated Alpha or Bravo. Shade match for 99% was Bravo or better. Only 1% of the crowns were carious, and 1 crown exhibited occlusal wear. One premolar crown had a small fracture of veneering porcelain. One molar crown was remade after core fracture. All patients (100%) expressed satisfaction with their crowns. The estimated 4-year success rates (Alpha or Bravo), with 95% confidence intervals in parentheses were calculated as: 83.5% (65.7%-94.6%) for marginal integrity, 95.8% (82.9%-99.8%) for shade match, and 95.5% (81.6%-99.7%) for secondary caries, 100% (88%-100%) for wear, and 100% (88%-100%) for cracks.

Short-term fluoride release/uptake of glass ionomer restoratives

OBJECTIVES The short-term fluoride release/uptake of four glass ionomer restoratives was measured and compared to the fluoride release after exposure to three commercial fluoride gels. METHODS Materials tested were: 1) Ketac-Fil (ESPE GmbH); 2) Ketac-Silver (ESPE GmbH); 3) Photac-Fil (ESPE GmbH); and 4) Fuji II LC (GC Corp.). Twenty discs of each material were fabricated and stored in deionized water at 37 degrees C. Initial fluoride release was measured at 24 h intervals for 7 d, and 24 h intervals at the end of each week for 5 wk. After 6 wk, samples were divided into groups and each group was treated for 6 min with one of the following commercial fluoride gels: acidulated phosphate fluoride (APF), neutral sodium fluoride (NaF), and stannous fluoride (SnF2). Control specimens were placed in deionized water. After exposure, fluoride measurements were carried out at 24 h intervals for 7 d, and 24 h intervals at the end of 2 wk. Fluoride exposure was repeated, and measurements were again recorded over 3 wk. RESULTS Initial fluoride release by all materials was highest during the first 24 h and decreased sharply over the first week. After exposure to APF, fluoride release increased significantly for all materials. Exposure to NaF also resulted in increased fluoride release for all materials although it was not as high as the increase recorded after exposure to APF. Exposure to SnF2 did not result in significant fluoride release by any material. SIGNIFICANCE The results of this study suggest that certain fluoride gels may replenish fluoride within some glass ionomers and thus prolong their cariostatic potential.

An In Vitro Comparison of Vertical Marginal Gaps of CAD/CAM Titanium and Conventional Cast Restorations

PURPOSE To determine if there was a significant difference between the vertical marginal openings of cast restorations, computer-aided design, and computer-aided machining restorations. MATERIALS AND METHODS Ten working dies were created from a single master die and used to fabricate ten restorations in each of the following groups: computer-aided design/computer-assisted machining (CAD/CAM), WAX/CAM, and WAX/CAST. The CAD/CAM titanium restorations were fabricated using the scanning and crown design modules of the KaVo Everest system. The WAX/CAM titanium restorations were fabricated using the double scan technique with the KaVo Everest system. The WAX/CAST high noble copings were fabricated using the conventional lost wax casting technique. The restorations were seated on the master die, and high-resolution digital photographs were made of the marginal area on all four sides. The vertical marginal opening was then measured using a calibrated digital software program. One-way ANOVA and Tukeys post hoc tests were used to determine the presence of statistically significant differences. RESULTS The vertical margin openings were CAD/CAM: 79.43 +/- 25.46 microm; WAX/CAM: 73.12 +/- 24.15 microm; WAX/CAST: 23.91 +/- 9.80 microm. There was a statistically significant difference between the WAX/CAST group and the remaining groups. CONCLUSIONS There was no difference between the vertical marginal gaps of the CAD/CAM and WAX/CAM. The WAX/CAST technique resulted in smaller vertical marginal gaps than either CAD/CAM or WAX/CAM.

An evaluation of the bond strengths of four organosilane materials in response to thermal stress.

This study investigated the effect of thermal stress on the shear bond strength of four commercially available porcelain repair materials. Porcelain cylinders were made and embedded in acrylic resin. Composite resins were bonded to the porcelain samples by using the four organosilane systems. The specimens were aged in 37 degrees C distilled water for 24 hours. Ten specimens per system were then thermocycled for 48 hours. Ten specimens per system remained in 37 degrees C distilled water for 48 hours. All samples were loaded at the composite resin/porcelain interface by using an Instron machine. Results demonstrated cohesive porcelain failures for most of the nonthermocycled specimens. Thermocycling caused a significant decrease in the bond strengths of the Command Ultrafine, Enamelite 500, and Fusion materials. Only the Scotchprime system maintained consistently high shear strength values under the conditions tested.

Flexural and fatigue strengths of denture base resin

STATEMENT OF PROBLEM Mechanical properties of denture acrylic resins are important for the clinical success of multiple types of prostheses. Acrylic resins must be strong and resilient so as to withstand impact. Few studies utilize cyclic loads to characterize material response to repeated stress. PURPOSE The purpose of this study was to evaluate static and dynamic flexure properties of a variety of acrylic resins utilized in the fabrication of prostheses: (1) heat-polymerized polymethyl methacrylate (PMMA), powder-liquid type, and (2) a newly introduced, visible light-polymerized urethane dimethacrylate dough type. MATERIAL AND METHODS Twenty rectangular bars each of 4 PMMA acrylic resin materials (Diamond D, Fricke HI-I, Lucitone 199, Nature-Cryl Hi-Plus) and 1 urethane dimethacrylate (Eclipse) were fabricated and stored in 100% humidity for 30 days. Half of the specimens for each group were submitted to a static 3-point flexure test. The other half was submitted to cycling loading at 5 Hz for 10(4) cycles. Data were analyzed using 1-way ANOVA and 2-way ANOVA, followed by Tukey HSD or Bonferroni post hoc tests when necessary (alpha=.05). RESULTS Mean static flexure strength (SDs) in MPa were: Eclipse, 127.11 (5.83); Diamond D, 84.92 (5.10); Lucitone 199, 83.96 (11.96); HI-I, 79.54 (5.84); and Nature-Cryl Hi-Plus, 75.82 (6.96). Mean flexural strengths (SDs) in MPa postcycling were: Eclipse, 113.36 (31.29); Diamond D, 88.26 (5.46); Nature-Cryl Hi-Plus, 81.86 (4.93); HI-I, 79.18 (6.60); and Lucitone 199, 74.34 (4.95). CONCLUSIONS The visible light-polymerized urethane dimethacrylate resin (Eclipse) showed greater flexure strength than all PMMA heat-polymerized resins for both static and cycled groups (P<.001). Yet the Eclipse material had lower load limits, and demonstrated brittle-type behavior and greater standard deviations. The heat-polymerized PMMA materials did not significantly differ from each other after static or cyclic testing.

Bond strengths of intraoral porcelain repair materials

This study investigated the in vitro shear strength of three porcelain repair systems. Glazed and roughened porcelain surfaces were evaluated. The repair systems tested were Fusion, Scotchprime, and Ultra-Bond. Porcelain cylinders were made. Half of the cylinders were wet-sanded to a flat, nonglazed surface and the remaining cylinders retained a smooth, glazed surface. Specimens were subjected to a shear force parallel to the composite/porcelain interface by use of an Instron Testing machine. Statistical analysis (at the 0.05 confidence level) showed significant differences in mean bond strengths related to the porcelain repair systems and the surface texture.

Microhardness of provisional fixed prosthodontic materials.

STATEMENT OF PROBLEM Provisional restorations play a critical role in the success of restorative treatment. Thus, the provisional restoration must maintain its surface integrity throughout the restorative process. PURPOSE This study evaluated the microhardness of 5 prosthodontic provisional materials. MATERIAL AND METHODS Cylindrical samples of 3 bis-acryl resin composites (Integrity, Protemp Garant, Temphase) and 2 methyl methacrylate acrylic resins (Jet, Temporary Bridge) were fabricated (n = 5 per material). Specimens were wet-sanded through 600 grit abrasive and stored in artificial saliva at 37 degrees C for a total of 14 days. Baseline Knoop hardness (KHN) was measured 24 hours after specimen fabrication. Three microhardness measurements were obtained from each specimen. Knoop hardness was again recorded after 14 days of storage. RESULTS ANOVA and Duncans tests (P<.05) indicated a significant difference between the methyl methacrylate type resins and the bis-acryl resin composites at both time intervals. CONCLUSION The hardness of most materials (Integrity, Protemp Garant, Jet) decreased over time. All of the bis-acryl resin composite materials exhibited superior microhardness over traditional methyl methacrylate (Jet, Temporary Bridge) resins.

Human Perception of Dental Porcelain Translucency Correlated to Spectrophotometric Measurements

PURPOSE This study evaluated the relationship between instrumental measurements and subjective visual assessment of differences in dental porcelain translucency. MATERIALS AND METHODS Unshaded feldspathic porcelain was used with controlled amounts of tin oxide to create two groups of 12-mm diameter disks with incremental changes in opacity. Contrast ratio (CR = Yb/Yw) was determined with a spectrophotometer, and used as a measure of porcelain translucency (Group A = 0.20 to 0.40; Group B = 0.6-0.8). Within each group, there were 14 specimens with 11 CRs. Three observer groups (first year dental students, residents, faculty with >10 years of shade matching experience) were recruited to assess the translucency between porcelain disks under two lighting conditions (reflected light, transmitted light). Each subjects ability to distinguish between specimens of differing translucency was determined. Descriptive statistics and three-way ANOVA followed by a post-hoc Tukey-Kramer test were used to evaluate the translucency perception threshold (TPT) of subjects (alpha= 0.05). RESULTS The overall mean TPT (DeltaC) was 0.07, while 50% of the subjects could perceive a 0.06 CR difference between porcelain specimens. Three-way ANOVA revealed a significant difference in translucency perception among the observer groups (p < 0.0001), whereas the main effects for porcelain opacity (p= 0.3038) and lighting condition (p= 0.0645) were not significant, and no significant interactions were found. Post-hoc Tukey-Kramer test indicated that the mean TPT observed in the faculty group (DeltaC = 0.04) was significantly lower than those observed in student (DeltaC = 0.09) and resident groups (DeltaC = 0.08), while there was no significant difference between students and residents. CONCLUSIONS The overall mean TPT of all subjects was 0.07, and 50% of the study population perceived a 0.06 CR difference in translucency. Increased shade matching experience (> or =10 years) significantly improved the ability to perceive differences in translucency; however, neither the viewing condition nor porcelain opacity affected the perceived translucency threshold.