Anabel Lermo

Immunoassay for folic acid detection in vitamin-fortified milk based on electrochemical magneto sensors.

An immunoassay-based strategy for folic acid in vitamin-fortified milk with electrochemical detection using magneto sensors is described for the first time. Among direct and indirect competitive formats, best performance was achieved with an indirect competitive immunoassay. The immunological reaction for folic acid (FA) detection was performed, for the first time on the magnetic bead as solid support by the covalent immobilization of a protein conjugate BSA-FA on tosyl-activated magnetic bead. Further competition for the specific antibody between FA in the food sample and FA immobilized on the magnetic bead was achieved, followed by the reaction with a secondary antibody conjugated with HRP (AntiIgG-HRP). Then, the modified magnetic beads were easily captured by a magneto sensor made of graphite-epoxy composite (m-GEC) which was also used as the transducer for the electrochemical detection. The performance of the immunoassay-based strategy with electrochemical detection using magneto sensors was successfully evaluated using spiked-milk samples and compared with a novel magneto-ELISA based on optical detection. The detection limit was found to be of the order of microgl(-1) (13.1 nmoll(-1), 5.8 microgl(-1)) for skimmed milk. Commercial vitamin-fortified milk samples were also evaluated obtaining good accuracy in the results. This novel strategy offers great promise for rapid, simple, cost-effective and on-site analysis of biological and food samples.

Double-tagging polymerase chain reaction with a thiolated primer and electrochemical genosensing based on gold nanocomposite sensor for food safety.

A novel material for electrochemical biosensing based on rigid conducting gold nanocomposite (nano-AuGEC) is presented. Islands of chemisorbing material (gold nanoparticles) surrounded by nonreactive, rigid, and conducting graphite epoxy composite are thus achieved to avoid the stringent control of surface coverage parameters required during immobilization of thiolated oligos in continuous gold surfaces. The spatial resolution of the immobilized thiolated DNA was easily controlled by merely varying the percentage of gold nanoparticles in the composition of the composite. As low as 9 fmol (60 pM) of synthetic DNA were detected in hybridization experiments when using a thiolated probe. Moreover, for the first time a double tagging PCR strategy was performed with a thiolated primer for the detection of Salmonella sp., one of the most important foodborne pathogens affecting food safety. This assay was performed by double-labeling the amplicon during the PCR with a -DIG and -SH set of labeled primers. The thiolated end allows the immobilization of the amplicon on the nano-AuGEC electrode, while digoxigenin allows the electrochemical detection with the antiDIG-HRP reporter in the femtomole range. Rigid conducting gold nanocomposite represents a good material for the improved and oriented immobilization of biomolecules with excellent transducing properties for the construction of a wide range of electrochemical biosensors such as immunosensors, genosensors, and enzymosensors.

Towards Q-PCR of pathogenic bacteria with improved electrochemical double-tagged genosensing detection.

A very sensitive assay for the rapid detection of pathogenic bacteria based on electrochemical genosensing has been designed. The assay was performed by the PCR specific amplification of the eaeA gene, related with the pathogenic activity of Escherichia coli O157:H7. The efficiency and selectivity of the selected primers were firstly studied by using standard Quantitative PCR (Q-PCR) based on TaqMan fluorescent strategy. The bacteria amplicon was detected by using two different electrochemical genosensing strategies, a highly selective biosensor based on a bulk-modified avidin biocomposite (Av-GEB) and a highly sensitive magneto sensor (m-GEC). The electrochemical detection was achieved in both cases by the enzyme marker HRP. The assay showed to be very sensitive, being able to detect 4.5 ng microl(-1) and 0.45 ng microl(-1) of the original bacterial genome after only 10 cycles of PCR amplification, when the first and the second strategies were used, respectively. Moreover, the electrochemical strategies for the detection of the amplicon showed to be more sensitive compared with Q-PCR strategies based on fluorescent labels such as TaqMan probes.

Electrochemical immunosensor for the diagnosis of celiac disease

A novel electrochemical immunosensing strategy for the detection of antibodies to tissue transglutaminase (tTG) in human serum is presented. The proposed immunosensor consists of the immobilization by physical adsorption of tTG from guinea pig liver on graphite-epoxy composite (GEC) electrodes. After the reaction with the human serum (containing the specific antibodies in the case of celiac disease), the electrode was incubated with different kinds of secondary labeled antibodies, namely, horseradish peroxidase (HRP)-conjugated goat antibodies to human whole immunoglobulins (Igs), to human IgG, and finally to human IgA. Among the different classes of antibodies in human serum toward tTG, the best results were achieved when anti-tTG IgA antibodies were investigated. In total, 10 positive and 10 negative serum samples were processed, obtaining a sensitivity of 70% and a specificity of 100% compared with the commercial enzyme-linked immunosorbent assay (ELISA) method performed in a hospital laboratory. This strategy offers great promise for a simple, cost-effective, and user-friendly analytical method that allows point-of-care diagnosis of celiac disease.

A novel strategy for screening-out raw milk contaminated with Mycobacterium bovis on dairy farms by double-tagging PCR and electrochemical genosensing

SUMMARY A highly sensitive assay for rapidly screening-out Mycobacterium bovis in contaminated samples was developed based on electrochemical genosensing. The assay consists of specific amplification and double-tagging of the IS6110 fragment, highly related to M. bovis, followed by electrochemical detection of the amplified product. PCR amplification was carried out using a labeled set of primers and resulted in a amplicon tagged at each terminus with both biotin and digoxigenin. Two different electrochemical platforms for the detection of the double-tagged amplicon were evaluated: (i) an avidin biocomposite (Av-GEB) and (ii) a magneto sensor (m-GEC) combined with streptavidin magnetic beads. In both cases, the double- tagged amplicon was immobilized through its biotinylated end and electrochemically detected, using an antiDig-HRP conjugate, through its digoxigenin end. The assay was determined to be highly sensitive, based on the detection of 620 and 10 fmol of PCR amplicon using the Av-GEB and m-GEC strategies, respectively. Moreover, the m-GEC assay showed promising features for the detection of M. bovis on dairy farms by screening for the presence of the bacteriums DNA in milk samples. The obtained results are discussed and compared with respect to those of inter-laboratory PCR assays and tuberculin skin testing.

Procedure 31 Rapid electrochemical verification of PCR amplification of Salmonella spp. based on m-GEC electrodes

Publisher Summary This chapter presents a procedure to perform a polymerase chain reaction (PCR) amplification of the IS200 insertion sequence of Salmonella spp. with double labeling of the amplicon by using labeled primer and quantify the double-labeling amplification products of Salmonella spp. by using an electrochemical strategy based on magnetic beads and m- graphite–epoxy composite (GEC) electrode. Amplification of the salmonella genome include DNA extraction, PCR reaction.DNA is extracted with phenol–chloroform–isoamyl alcohol (25:24:1) and DNA is by precipitated with isopropanol. The PCR is performed according to the kit manufacturer, in a 100 μL of reaction mixture containing PCR template, 200 μmol L –1 of each deoxynucleotide triphosphate, 0.5 μmol L –1 of each labeled primer and 5 U of Taq polymerase, and in buffer containing 1.5 μmol L–1 MgCl 2 .

Procedure 32 In situ DNA amplification of Salmonella spp. with magnetic primers for the real-time electrochemical detection based on m-GEC electrodes

Publisher Summary This chapter presents a procedure to perform an in situ polymerase chain reaction (PCR) amplification of the IS200 insertion sequence of Salmonella spp. with double labeling of the amplicon on magnetic bead primers and to quantify the double-labeling amplification products growth on magnetic beads by using an electrochemical strategy based on magnetic beads and magneto graphite–epoxy composite (m-GEC) electrodes. In situ salmonella genome amplification with magnetic bead primers include two steps: DNA extraction, magnetic bead primers preparation, and PCR reaction. For extraction overnight culture of Salmonella enteric is centrifuged. DNA is extracted twice with phenol–chloroform–isoamyl alcohol and DNA is precipitated with isopropanol. For preparation of magnetic beads primer streptavidin-modified magnetic beads are immobilized and put on the magnetic separator. Further, a washing step is performed with 140 μL Milli-Q water for 10 min at 42°C. The PCR is performed according to the kit manufacturer.