Andre Baldermann

THE RATE AND MECHANISM OF DEEP-SEA GLAUCONITE FORMATION AT THE IVORY COAST–GHANA MARGINAL RIDGE

The environmental conditions and reaction paths of shallow-water glauconitization (<500 m water depth, ~15°C) close to the sediment-seawater interface are generally considered to be well understood. In contrast, the key factors controlling deep-sea glauconite formation are still poorly constrained. In the present study, green grains formed in the recent deep-sea environment of the ODP Site 959, Ivory Coast-Ghana Marginal Ridge, (~2100 m water depth, 3-6°C) were investigated by X-ray diffraction and electron microscopic methods in order to determine the rate and mechanism of glauconitization.Green clay authigenesis at Hole 959C occurred mainly in the tests of calcareous foraminifera which provided post-depositional conditions ideal for glauconitization. Within this organic-rich microenvironment, Fe-smectite developed <10 ky after deposition of the sediments by precipitation from precursor gels containing Fe, Mg, Al, and silica. This gel formation was supported by microbial activity and cation supply from the interstitial solution by diffusion. At a later stage of early marine diagenesis (900 ky), the Fe-smectites reacted to form mixed-layer glauconite-smectite. Further down (~2500 ky), almost pure glauconite with no compositional gaps between the Fe-smectite and glauconite end members formed. This burial-related Fe-smectite-to-glauconite reaction indicates that the glauconitization process was controlled mainly by the chemistry of the interstitial solutions. The composition of the interstitial solution depends heavily on micro-environmental changes related to early diagenetic oxidation of biodegradable (marine) organic matter, microbial sulfate reduction, silicate mineral alteration, carbonate dissolution, and Fe redox reactions. The availability of Fe is suggested as the probable limiting factor for glauconitization, explaining the various states of green-grain maturity within the samples, and this cation may be the most important rate-determining element.The rate of glauconite formation at ODP Site 959 is given by %GlSed = 22.6·log(ageSed) + 1.6 (R2 = 0.97) where %GlSed is the state of glauconitization in the sediment and ageSed is the sediment age (in ky). This glauconitization rate depends mainly on continuous cation supply (in particular Fe) and is about five times less than that in shallow-shelf regions, suggesting significantly slower reaction at the lower temperature of deep-sea environments.

The Fe-Mg-saponite solid solution series - A hydrothermal synthesis study

Abstract The boundary conditions of saponite formation are generally considered to be well known, but significant gaps in our knowledge persist in respect to the influence of solution chemistry, temperature, and reaction time on the mineralogy, structure, stability, and chemical composition of laboratory-grown ferrous saponite. In the present study, ferrous saponite and Mgsaponite were synthesized in Teflon-lined, stainless steel autoclaves at 60, 120 and 180°C, alkaline pH, reducing conditions, and initial solutions with molar Si:Fe:Mg ratios of 4:0:2, 4:1:1, 4:1.5:0.5, 4:1.75:0.25, and 4:1.82:0.18. The experimental solutions were prepared by dissolution of sodium orthosilicate (Na4SiO4), iron(II)sulfate (FeSO4·6H2O) and magnesium chloride salts (MgCl2·6H2O with 40.005 mass% of K and Ca) in 50 mL ultrapure water that contained 0.05% sodium dithionite as the reducing agent. The precipitates obtained at two, five and seven days of reaction time were investigated by X-ray diffraction techniques, transmission electron microscopy analysis, infra-red spectroscopy, and thermo-analytical methods. The precipitates were composed mainly of trioctahedral ferrous saponite, with small admixtures of co-precipitated brucite, opal-CT, and 2-line ferrihydrite, and nontronite as the probable alteration product of ferrous saponite. The compositions of the obtained ferrous saponites were highly variable, (Na0.44-0.59K0.00-0.05Ca0.00-0.02) (Fe2+0.37-2.41Mg0.24-2.44Fe3+0.00-0.28 )S2.65-2.85 [(Fe3+0.00-0.37Si3.63-4.00)O10](OH)2, but show similarities with naturally occurring trioctahedral Fe and Mg end members, except for the Al content. This suggests that a complete solid solution may exist in the Fe-Mg-saponite series. A conceptual reaction sequence for the formation of ferrous saponite is developed based on the experimental solution and solid compositions. Initially, at pH ≥ 10.4, brucite-type octahedral template sheets are formed, where dissolved Si-O tetrahedra are condensed. Subsequent reorganization of the octahedra and tetrahedra via multiple dissolution-precipitation processes finally results in the formation of saponite structures, together with brucite and partly amorphous silica. The extent of Fe2+ incorporation in the octahedral template sheets via isomorphic substitution is suggested to stabilize the saponite structure, explaining (i) the abundance of saponite enriched in VIFe2+ at elevated Fe supply and (ii) the effect of structural Fe on controlling the net formation rates of ferrous saponite.