Andre Frotta Muller

Transvaginal electrical stimulation in the treatment of urinary incontinence.

To determine the effectiveness of transvaginal electrical stimulation (TES) in treating urinary incontinence, and to assess the clinical improvement 6 months after ending the treatment.

Vaginal probe transducer: Characterization and measurement of pelvic-floor strength

The pelvic-floor muscles (PFM) play an important role in urinary and fecal continence. Several investigators have studied the PFM using intra-vaginal pressure measurements, but their methods have not been validated. We describe the characteristics of a probe transducer developed to measure PFM strength according to its dynamic response and the effects of temperature variation. This probe transducer was used to evaluate changes in the contraction strength of pelvic muscles in a group of patients who participated in a PFM training program. Experiments allowed the identification of the probes characteristics at different temperatures, definition of a calibration equation, and measurements of the dynamic response to pressure pulse. Evaluation of patients before and after the PFM training program showed significant differences in the peak pressure achieved during the contraction (p<0.001) and in pressure-rise time (p<0.01). The tests performed with the probe allowed the characterization of the proposed transducer, and the intra-vaginal pressure measurements in volunteers undergoing a PFM training program allowed a quantitative evaluation of the PFM strength.

Oxygen desaturation during the six-minute walk test in COPD patients.

Objective: To evaluate the behavior of oxygen saturation curves throughout the six-minute walk test (6MWT) in patients with COPD. Methods: We included 85 patients, all of whom underwent spirometry and were classified as having moderate COPD (modCOPD, n = 30) or severe COPD (sevCOPD, n = 55). All of the patients performed a 6MWT, in a 27-m corridor with continuous SpO2 and HR monitoring by telemetry. We studied the SpO2 curves in order to determine the time to a 4% decrease in SpO2, the time to the minimum SpO2 (Tmin), and the post-6MWT time to return to the initial SpO2, the last designated recovery time (RT). For each of those curves, we calculated the slope. Results: The mean age in the modCOPD and sevCOPD groups was 66 ± 10 years and 62 ± 11 years, respectively. At baseline, SpO2 was > 94% in all of the patients; none received supplemental oxygen during the 6MWT; and none of the tests were interrupted. The six-minute walk distance did not differ significantly between the groups. The SpO2 values were lowest in the sevCOPD group. There was no difference between the groups regarding RT. In 71% and 63% of the sevCOPD and modCOPD group patients, respectively, a ≥ 4% decrease in SpO2 occurred within the first minute. We found that FEV1% correlated significantly with the ΔSpO2 (r = −0.398; p < 0.001), Tmin (r = −0.449; p < 0.001), and minimum SpO2 (r = 0.356; p < 0.005). Conclusions: In the sevCOPD group, in comparison with the modCOPD group, SpO2 was lower and the Tmin was greater, suggesting a worse prognosis in the former.

Patient-Controlled Biofeedback Device for the Treatment of Fecal Incontinence: A Pilot Study

Although biofeedback has been used as a first-line therapy for fecal incontinence, it is known to be time consuming and demands attendance to a hospital during the whole period of treatment. In this study, we describe a new biofeedback device specifically developed for home treatment of fecal incontinence, which consists of a microprocessor controlled unit able to register and store the anal pressure waves corresponding to exercises performed by patients at home. In order to test the new device, a pilot study including ten patients with fecal incontinence was conducted. Evaluation of patients before and after the biofeedback training showed significant improvement in manometric and clinical parameters of anal continence. The new method may improve compliance of patients with the training program and reduce their need to be supervised during the treatment. It might represent a new alternative for the treatment of fecal incontinence.

Fiber-reinforced silicone for tracheobronchial stents: An experimental study

A trachea is a tubular structure composed of smooth muscle that is reinforced with cartilage rings. Some diseases can cause sagging in smooth muscle and cartilaginous tissue. The end result is reduction (narrowing) of the trachea diameter. A solution to this problem is the use of tracheal stents, which are small tubular devices made of silicone. One is inserted into the trachea to prevent or correct its constriction. The purpose of tracheal stent use is to maintain cartilage support that would otherwise be lost in the airway. Current tracheal stent models present limitations in terms of shape and characteristics of the silicone used in their production. One of the most important is the large thickness of the wall, which makes its placement difficult; this mainly applies to pediatric patients. The wall thickness of the stent is closely related to the mechanical properties of the material. This study aims to test the reinforcement of silicone with three kinds of fibers, and then stents that were produced using fiber with the best compressive strength characteristics. Silicone samples were reinforced with polypropylene (PP), polyamide (PA), and carbon fiber (CF) at concentrations of 2% and 4% (vol%), which then underwent tensile strength and Shore A hardness testing. Samples with fiber showed good characteristics; surface analyses were carried out and they were used to produce stents with an internal diameter of 11 or 13mm and a length of 50mm. Stents underwent compression tests for qualitative evaluation. Samples with 2% and 4% CF blends showed the best mechanical performance, and they were used to produce stents. These samples presented similar compressive strengths at low deformation, but stents with a 4% CF blend exhibited improved compressive strength at deformations greater than 30-50% of their diameter (P ≤ 0.05). The addition of 2% and 4% CF blends conferred greater mechanical strength and resistance to the silicone matrix. This is particularly true at low deformation, which is the condition where the stent is used when implanted. In the finite element compression strength tests, the stent composite showed greater compression strength with the addition of fiber, and the results were in accordance with mechanical compression tests performed on the stents. In vivo tests showed that, after 30 days of post-implantation in sheep trachea, an inflammatory process occurred in the region of the trachea in contact with the stent composite and with the stent without fiber (WF). This response is a common process during the first few days of implantation.

Repeatability of the Evaluation of Perception of Dyspnea in Normal Subjects Assessed Through Inspiratory Resistive Loads

Purpose: Study the repeatability of the evaluation of the perception of dyspnea using an inspiratory resistive loading system in healthy subjects. Methods: We designed a cross sectional study conducted in individuals aged 18 years and older. Perception of dyspnea was assessed using an inspiratory resistive load system. Dyspnea was assessed during ventilation at rest and at increasing resistive loads (0.6, 6.7, 15, 25, 46.7, 67, 78 and returning to 0.6 cm H2O/L/s). After breathing in at each level of resistive load for two minutes, the subject rated the dyspnea using the Borg scale. Subjects were tested twice (intervals from 2 to 7 days). Results: Testing included 16 Caucasian individuals (8 male and 8 female, mean age: 36 years). The median scores for dyspnea rating in the first test were 0 at resting ventilation and 0, 2, 3, 4, 5, 7, 7 and 1 point, respectively, with increasing loads. The median scores in the second test were 0 at resting and 0, 0, 2, 2, 3, 4, 4 and 0.5 points, respectively. The intra-class correlation coefficient was 0.57, 0.80, 0.74, 0.80, 0.83, 0.86, 0.91, and 0.92 for each resistive load, respectively. In a generalized linear model analysis, there was a statistically significant difference between the levels of resistive loads (p<0.001) and between tests (p=0.003). Dyspnea scores were significantly lower in the second test. Conclusion: The agreement between the two tests of the perception of dyspnea was only moderate and dyspnea scores were lower in the second test. These findings suggest a learning effect or an effect that could be at least partly attributed to desensitization of dyspnea sensation in the brain.