Andre Pommerin

Investigation of hydrogen discharging and recharging processes of Ti-doped NaAlH4 by X-ray diffraction analysis (XRD) and solid-state NMR spectroscopy

Abstract The processes occurring in the course of two sequential hydrogen discharging and recharging cycles of Ti-doped sodium alanate were investigated in parallel using XRD analysis and solid-state NMR spectroscopy. Both methods demonstrate that in hydrogen storage cycles ( Eq. (1) ) the majority phases involved are NaAlH 4 , Na 3 AlH 6 , Al and NaH. Only traces of other, as yet unidentified phases are observed, one of which has been tentatively assigned to an Al–Ti alloy on the basis of XRD analysis. The unsatisfactory hydrogen storage capacities heretofore observed in cycle tests are shown to be due entirely to the reaction of Na 3 AlH 6 with Al and hydrogen to NaAlH 4 ( Eq. (1) , 2nd hydrogenation step) being incomplete. Using XRD and NMR methods it has been shown that a higher level of rehydrogenation can be achieved by adding an excess of Al powder.

Complex Rare-Earth Aluminum Hydrides: Mechanochemical Preparation, Crystal Structure and Potential for Hydrogen Storage

A novel type of complex rare-earth aluminum hydride was prepared by mechanochemical preparation. The crystal structure of the REAlH(6) (with RE = La, Ce, Pr, Nd) compounds was calculated by DFT methods and confirmed by preliminary structure refinements. The trigonal crystal structure consists of isolated [AlH(6)](3-) octahedra bridged via [12] coordinated RE cations. The investigation of the rare-earth aluminum hydrides during thermolysis shows a decrease of thermal stability with increasing atomic number of the RE element. Rare-earth hydrides (REH(x)) are formed as primary dehydrogenation products; the final products are RE-aluminum alloys. The calculated decomposition enthalpies of the rare-earth aluminum hydrides are at the lower end for reversible hydrogenation under moderate conditions. Even though these materials may require somewhat higher pressures and/or lower temperatures for rehydrogenation, they are interesting examples of low-temperature metal hydrides for which reversibility might be reached.

Synthesis, Crystal Structures, and Hydrogen-Storage Properties of Eu(AlH4)(2) and Sr(AlH4)(2) and of Their Decomposition Intermediates, EuAlH5 and SrAlH5

Complex Eu(AlH(4))(2) and Sr(AlH(4))(2) hydrides have been prepared by a mechanochemical metathesis reaction from NaAlH(4) and europium or strontium chlorides. The crystal structures were solved from powder X-ray diffraction data in combination with solid-state (27)Al NMR spectroscopy. The thermolysis pathway was analyzed in detail, allowing identification of new intermediate EuAlH(5)/SrAlH(5) compounds. Rehydrogenation experiments indicate that the second decomposition step is reversible.

Influence of the degree of infiltration of modified activated carbons with CuO/ZnO on the separation of NO2 at ambient temperatures

The reduction of NO2 in air at ambient temperatures with activated carbons can be increased by the infiltration of metal oxide nanoparticles into the sorbents. The NO2 is first adsorbed to the activated carbon and subsequently catalytically reduced to physiologically neutral substances by the metal oxides. The catalytic reduction at ambient temperatures is rather slow. In a former study concerning the application in cabin air filters, it was shown that the modification of activated carbon with 5 wt% CuO/ZnO leads to reduced breakthrough of NO2 and that the adsorbent was able to regenerate between repeated NO2 adsorption cycles. Here we show that the efficiency of the sorbent can be more than doubled by increasing the metal oxide infiltration to 20 wt% whereas a further increase in loading yields no additional improvement, due to a partial transformation of the oxidic compounds.