Andrea Barucci

Generation of hyper-parametric oscillations in silica microbubbles

Cavity resonant enhanced stimulated Raman scattering (SRS), four-wave mixing, and broadband hyper-parametric oscillation in silica microbubble whispering gallery mode resonators (WGMR) in forward and backward directions are reported in this Letter. We show that microbubbles can operate not only in a highly ideal two-photon emission regime, but also generate combs, both natively and multi-mode spaced. The nonlinear process is phase matched because of the interaction of different mode families of the resonator.

Whispering Gallery Mode Aptasensors for Detection of Blood Proteins

Whispering gallery mode resonators (WGMR), as silica microspheres, have been recently proposed as an efficient tool for the realisation of optical biosensors. In this work we present a functionalization procedure based on the DNA-aptamer sequence immobilization on WGMR, able to recognize specifically thrombin or VEGF protein, preserving a high Q factor. The protein binding was optically characterized in terms of specificity in buffer solution or in 10% diluted human serum. Simulation of the protein flow was found in good agreement with experimental data. The aptasensor was also chemically regenerated and tested again, demonstrating the reusability of our system.

Confocal reflectance microscopy for determination of microbubble resonator thickness

Optical Micro Bubble Resonators (OMBR) are emerging as new type of sensors characterized by high Q-factor and embedded micro-fluidic. Sensitivity is related to cavity field penetration and, therefore, to the resonator thickness. At the state of the art, methods for OMBRs wall thickness evaluation rely only on a theoretical approach. The purpose of this study is to create a non-destructive method for measuring the shell thickness of a microbubble using reflectance confocal microscopy. The method was validated through measurements on etched capillaries with different thickness and finally it was applied on microbubble resonators.

Fiber ring laser for intracavity sensing using a whispering-gallery-mode resonator

Whispering-gallery-mode (WGM) microresonators are used as optical transducers for sensing applications. The typical detection scheme is based on tracking the WGM resonance shift, by scanning with a tunable laser, when a change of the refractive index in the region probed by the WGM takes place. We propose a sensing approach based instead on monitoring the position of the laser line of a fiber ring laser having a WGM microsphere in its loop. We have demonstrated that the induced shift is the same for the ring laser line and for the microsphere resonance. The proposed method requires simpler, cheaper equipment and may also improve the sensor resolution because the ring laser line is much narrower than the microsphere WGM resonance.

Optical fibre nanotips fabricated by a dynamic chemical etching for sensing applications

Nanoprobe tips are key components in many applications such as scanning probe microscopes, nanoscale imaging, nanofabrication and sensing. This paper describes a dynamic chemical etching method for the fabrication of optical nanoprobes. The tips are produced by mechanically rotating and dipping a silica optical fibre in a chemical etching solution (aqueous hydrofluoric acid) covered with a protection layer. Using different dynamic regimes of the mechanical movements during the chemical etching process, it is possible to vary the cone angle, the shape, and the roughness of the nanoprobes. It is found that the tip profiles are determined by the nonlinear dynamic evolution of the meniscus of the etchant near the fibre. Computational fluid dynamic simulations have been performed, showing that different flow regimes correspond to different shear forces acting on the forming nanotip, in agreement with experimental results. With this method, a high yield of reproducible nanotips can be obtained, thus overcoming ...

Optical Fiber Nanotips Coated with Molecular Beacons for DNA Detection

Optical fiber sensors, thanks to their compactness, fast response and real-time measurements, have a large impact in the fields of life science research, drug discovery and medical diagnostics. In recent years, advances in nanotechnology have resulted in the development of nanotools, capable of entering the single cell, resulting in new nanobiosensors useful for the detection of biomolecules inside living cells. In this paper, we provide an application of a nanotip coupled with molecular beacons (MBs) for the detection of DNA. The MBs were characterized by hybridization studies with a complementary target to prove their functionality both free in solution and immobilized onto a solid support. The solid support chosen as substrate for the immobilization of the MBs was a 30 nm tapered tip of an optical fiber, fabricated by chemical etching. With this set-up promising results were obtained and a limit of detection (LOD) of 0.57 nM was reached, opening up the possibility of using the proposed nanotip to detect mRNAs inside the cytoplasm of living cells.

Coupling light to whispering gallery mode resonators

Full exploitation of the unique properties of high quality factor micro-optical Whispering Gallery Mode (WGM) resonators requires a controllable and robust coupling of the light to the cavity, either for fundamental investigations or even more for practical applications. Fiber tapers are ideal phase-and-mode-matched couplers and are typically used for lab demonstrations in silica based micro-resonators or in low-index crystalline disks. Prism-based coupling basically adapts to any material and offers improved robustness and reliability for the implementation of devices based on larger resonators. We present the results of our studies on alternative methods based on integrated waveguides with specific reference to the coupling to lithium niobate disk resonators. We also demonstrate efficient coupling from fiber tapers to higher order azimuthal modes in coated microspheres and for third harmonic generation in silica microspheres. We finally propose a new method based on fiber gratings for improved robustness in biosensing applications.

Kerr versus thermal non-linear effects studied by hybrid whispering gallery mode resonators [Invited]

Whispering-gallery-modes (WGM) spherical microresonators may reveal new perspective properties being coated with non-linear thin layers. We present the examples of all-optical switching of WGM in silica microspheres covered with a polyfluorene derivative showing ultrafast Kerr nonlinearity, or a relatively slow thermal nonlinearity. Another set of measurements performed with an inert polymer, an acrylate derivative, is discussed as well.

Optical Microbubble Resonators with High Refractive Index Inner Coating for Bio-Sensing Applications: An Analytical Approach

The design of Whispering Gallery Mode Resonators (WGMRs) used as an optical transducer for biosensing represents the first and crucial step towards the optimization of the final device performance in terms of sensitivity and Limit of Detection (LoD). Here, we propose an analytical method for the design of an optical microbubble resonator (OMBR)-based biosensor. In order to enhance the OMBR sensing performance, we consider a polymeric layer of high refractive index as an inner coating for the OMBR. The effect of this layer and other optical/geometrical parameters on the mode field distribution, sensitivity and LoD of the OMBR is assessed and discussed, both for transverse electric (TE) and transverse magnetic (TM) polarization. The obtained results do provide physical insights for the development of OMBR-based biosensor.

Localized biomolecules immobilization in optical microbubble resonators

In order to optimize the performance of an optical microbubble resonator (OMBR) as biosensor, the chemical functionalization of its inner surface plays a key role. Here we report on a spatially selective photo – chemical procedure able to bind fluorescent biomolecules only in correspondence of the OMBR inner surface. This abruptly reduces the occurrence of an undesired specific biochemical bond event all along the microfluidic section of the device. The evidence of this method, which maintains high Q factor (> 105) for the OMBR in buffer solution, is proved by fluorescence microscopy and real time measurement of the resonance broadening.