Andrea Di Luca

Poly(N-isopropylacrylamide)–poly(ferrocenylsilane) dual-responsive hydrogels: synthesis, characterization and antimicrobial applications

Novel hydrogels composed of thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) and redox-responsive poly(ferrocenylsilane) (PFS) macromolecules were formed by photopolymerization. PFS chains bearing acrylate side groups were copolymerized with NIPAM and N,N′-methylenebisacrylamide in tetrahydrofuran in a predetermined ratio under ultraviolet light-emitting diode (UV-LED) irradiation at a wavelength of 365 nm, in the presence of a photoinitiator. Crosslinking occurred smoothly, providing homogeneous hydrogels. The equilibrium swelling ratio, rheology and morphology of these hybrid PNIPAM–PFS-based hydrogels were investigated. The thermo-responsive properties of the hydrogels were studied as a function of the PFS oxidation state. In situ fabrication of silver nanoparticles inside the hydrogel network via reduction of silver nitrate by the PFS chains led to hydrogel composites. These composites showed strong antimicrobial activity while maintaining a high biocompatibility with cells

Amphiphilic beads as depots for sustained drug release integrated into fibrillar scaffolds

Native extracellular matrix (ECM) is a complex fibrous structure loaded with bioactive cues that affects the surrounding cells. A promising strategy to mimicking native tissue architecture for tissue engineering applications is to engineer fibrous scaffolds using electrospinning. By loading appropriate bioactive cues within these fibrous scaffolds, various cellular functions such as cell adhesion, proliferation and differentiation can be regulated. Here, we report on the encapsulation and sustained release of a model hydrophobic drug (dexamethasone (Dex)) within beaded fibrillar scaffold of poly(ethylene oxide terephthalate)-poly(butylene terephthalate) (PEOT/PBT), a polyether-ester multiblock copolymer to direct differentiation of human mesenchymal stem cells (hMSCs). The amphiphilic beads act as depots for sustained drug release that is integrated into the fibrillar scaffolds. The entrapment of Dex within the beaded structure results in sustained release of the drug over the period of 28days. This is mainly attributed to the diffusion driven release of Dex from the amphiphilic electrospun scaffolds. In vitro results indicate that hMSCs cultured on Dex containing beaded fibrillar scaffolds exhibit an increase in osteogenic differentiation potential, as evidenced by increased alkaline phosphatase (ALP) activity, compared to the direct infusion of Dex in the culture medium. The formation of a mineralized matrix is also significantly enhanced due to the controlled Dex release from the fibrous scaffolds. This approach can be used to engineer scaffolds with appropriate chemical cues to direct tissue regeneration.

The osteochondral interface as a gradient tissue: From development to the fabrication of gradient scaffolds for regenerative medicine

The osteochondral (OC) interface is not only the interface between two tissues, but also the evolution of hard and stiff bone tissue to the softer and viscoelastic articular cartilage covering the joint surface. To generate a smooth transition between two tissues with such differences in many of their characteristics, several gradients are recognizable when moving from the bone side to the joint surface. It is, therefore, necessary to implement such gradients in the design of scaffolds to regenerate the OC interface, so to mimic the anatomical, biological, and physicochemical properties of bone and cartilage as closely as possible. In the past years, several scaffolds were developed for OC regeneration: biphasic, triphasic, and multilayered scaffolds were used to mimic the compartmental nature of this tissue. The structure of these scaffolds presented gradients in mechanical, physicochemical, or biological properties. The use of gradient scaffolds with already differentiated or progenitor cells has been recently proposed. Some of these approaches have also been translated in clinical trials, yet without the expected satisfactory results, thus suggesting that further efforts in the development of constructs, which can lead to a functional regeneration of the OC interface by presenting gradients more closely resembling its native environment, will be needed in the near future. The aim of this review is to analyze the gradients present in the OC interface from the early stage of embryonic life up to the adult organism, and give an overview of the studies, which involved gradient scaffolds for its regeneration.

Influencing chondrogenic differentiation of human mesenchymal stromal cells in scaffolds displaying a structural gradient in pore size

UNLABELLED Articular cartilage lesions have a limited ability to heal by themselves. Yet, golden standard treatments for cartilage repair such as drilling, microfracture and mosaicplasty provide further damage and an unstable solution that degenerates into fibrocartilage in time. Articular cartilage presents a number of gradients in cell number and size along with structural gradients in extra cellular matrix (ECM) composition. Therefore, creating scaffolds that display a structural gradient can be an appealing strategy for cartilage tissue regeneration treatments. In the present study, a scaffold with an in-built discrete gradient in pore size was produced by additive manufacturing. Human mesenchymal stromal cells (hMSCs) were seeded within the gradient scaffolds and their proliferation, differentiation and ECM deposition was evaluated with respect to 2 non-gradient scaffolds. Glycosaminoglycan (GAG) deposition was significantly higher in gradient scaffolds and non-gradient scaffolds with the smallest pore size compared to non-gradient scaffolds with the largest pore size. A gradual increase of chondrogenic markers was observed within the gradient structures with decreasing pore size, which was also accompanied by an increasingly compact ECM formation. Therefore, scaffolds displaying a structural gradient in pore size seem to be a promising strategy to aid in the process of hMSC chondrogenic differentiation and could be considered for improved cartilage tissue regeneration applications. STATEMENT OF SIGNIFICANCE We present the development of a novel hierarchical scaffold obtained by additive manufacturing. Structural hierarchy is obtained by changing pore size within the pore network characterizing the fabricated scaffolds and proves to be a functional element in the scaffold to influence adult stem cell differentiation in the chondrogenic lineage. Specifically, in regions of the scaffolds presenting smaller pores an increasing differentiation of stem cells toward the chondrogenic differentiation is displayed. Taking inspiration from the zonal organization of articular cartilage tissue, pore size gradients could, therefore, be considered as a new and important element in designing 3D scaffolds for regenerative medicine applications, in particular for all those tissues where gradient physical properties are present.

Gradients in pore size enhance the osteogenic differentiation of human mesenchymal stromal cells in three-dimensional scaffolds

Small fractures in bone tissue can heal by themselves, but in case of larger defects current therapies are not completely successful due to several drawbacks. A possible strategy relies on the combination of additive manufactured polymeric scaffolds and human mesenchymal stromal cells (hMSCs). The architecture of bone tissue is characterized by a structural gradient. Long bones display a structural gradient in the radial direction, while flat bones in the axial direction. Such gradient presents a variation in bone density from the cancellous bone to the cortical bone. Therefore, scaffolds presenting a gradient in porosity could be ideal candidates to improve bone tissue regeneration. In this study, we present a construct with a discrete gradient in pore size and characterize its ability to further support the osteogenic differentiation of hMSCs. Furthermore, we studied the behaviour of hMSCs within the different compartments of the gradient scaffolds, showing a correlation between osteogenic differentiation and ECM mineralization, and pore dimensions. Alkaline phosphatase activity and calcium content increased with increasing pore dimensions. Our results indicate that designing structural porosity gradients may be an appealing strategy to support gradual osteogenic differentiation of adult stem cells.

Thin Polymer Brush Decouples Biomaterial’s Micro-/Nanotopology and Stem Cell Adhesion

Surface morphology and chemistry of polymers used as biomaterials, such as tissue engineering scaffolds, have a strong influence on the adhesion and behavior of human mesenchymal stem cells. Here we studied semicrystalline poly(ε-caprolactone) (PCL) substrate scaffolds, which exhibited a variation of surface morphologies and roughness originating from different spherulitic superstructures. Substrates were obtained by varying the parameters of the thermal processing, that is, crystallization conditions. The cells attached to these polymer substrates adopted different morphologies responding to variations in spherulite density and size. In order to decouple substrate topology effects on the cells, sub-100 nm bioadhesive polymer brush coatings of oligo(ethylene glycol) methacrylates were grafted from PCL and functionalized with fibronectin. On surfaces featuring different surface textures, dense and sub-100 nm thick brush coatings determined the response of cells, irrespective to the underlying topology. Thus, polymer brushes decouple substrate micro-/nanoscale surface topology and the adhesion of stem cells.

Stability and Cell Adhesion Properties of Poly(N-isopropylacrylamide) Brushes with Variable Grafting Densities

Poly(N-isopropylacrylamide) brushes with three different grafting densities were synthesized via surface-initiated atom-transfer radical polymerization on glass or on silicon substrates. The substrates were modified with monochlorosilane-based or trimethoxysilane-based atom-transfer radical polymerization initiators. Atomic force microscopy images showed detachment of brushes from the monochlorosilane-based system under cell culture conditions. In situ ellipsometry demonstrated the reversible swelling and collapse of the brushes as the temperature was varied across the lower critical solution temperature of poly(N-isopropylacrylamide) in pure water. The polymer brushes were evaluated as supporting substrates for MC-3T3 cell cultures. At 37°C (T>lower critical solution temperature), the seeded cells adhered, spread, and proliferated, whereas at 25°C (T<lower critical solution temperature), the cells detached from the surface. The low-density polymer brush showed the highest cell adhesion, featuring adhering cells with an elongated morphology.

Surface energy and stiffness discrete gradients in additive manufactured scaffolds for osteochondral regeneration

Swift progress in biofabrication technologies has enabled unprecedented advances in the application of developmental biology design criteria in three-dimensional scaffolds for regenerative medicine. Considering that tissues and organs in the human body develop following specific physico-chemical gradients, in this study, we hypothesized that additive manufacturing (AM) technologies would significantly aid in the construction of 3D scaffolds encompassing such gradients. Specifically, we considered surface energy and stiffness gradients and analyzed their effect on adult bone marrow derived mesenchymal stem cell differentiation into skeletal lineages. Discrete step-wise macroscopic gradients were obtained by sequentially depositing different biodegradable biomaterials in the AM process, namely poly(lactic acid) (PLA), polycaprolactone (PCL), and poly(ethylene oxide terephthalate)/poly(butylene terephthalate) (PEOT/PBT) copolymers. At the bulk level, PEOT/PBT homogeneous scaffolds supported a higher alkaline phosphatase (ALP) activity compared to PCL, PLA, and gradient scaffolds, respectively. All homogeneous biomaterial scaffolds supported also a significantly higher amount of glycosaminoglycans (GAGs) production compared to discrete gradient scaffolds. Interestingly, the analysis of the different material compartments revealed a specific contribution of PCL, PLA, and PEOT/PBT to surface energy gradients. Whereas PEOT/PBT regions were associated to significantly higher ALP activity, PLA regions correlated with significantly higher GAG production. These results show that cell activity could be influenced by the specific spatial distribution of different biomaterial chemistries in a 3D scaffold and that engineering surface energy discrete gradients could be considered as an appealing criterion to design scaffolds for osteochondral regeneration.

Influence of internal pore architecture on biological and mechanical properties of three‐dimensional fiber deposited scaffolds for bone regeneration

Fused deposition modeling has been used to fabricate three-dimensional (3D) scaffolds for tissue engineering applications, because it allows to tailor their pore network. Despite the proven flexibility in doing so, a limited amount of studies have been performed to evaluate whether specific pore shapes have an influence on cell activity and tissue formation. Our study aimed at investigating the influence of internal pore architecture on the biological and mechanical properties of 3D scaffolds seeded with mesenchymal stromal cells. Polycaprolactone scaffolds with six different geometries were fabricated. The 3D samples were manufactured with different lay-down pattern of the fibers by varying the layer deposition angle from 0°/15°/30°, to 0°/30°/60°, 0°/45°/90°, 0°/60°/120°, 0°/75°/150°, and 0°/90°/180°. The scaffolds were investigated by scanning electron microscopy and micro computed tomographical analysis and displayed a fully interconnected pore network. Cell proliferation and differentiation toward the osteogenic lineage were evaluated by DNA, alkaline phosphatase activity, and polymerase chain reaction. The obtained scaffolds had structures with open porosity (50%-60%) and interconnected pores ranging from 380 to 400 µm. Changing the angle deposition affected significantly the mechanical properties of the scaffolds. With increasing the angle deposition between successive layers, the elastic modulus increased as well. Cellular studies also showed influence of the internal architecture on cell adhesion and proliferation within the 3D construct, yet limited influence on cell differentiation was observed.

Creeping Proteins in Microporous Structures: Polymer Brush-Assisted Fabrication of 3D Gradients for Tissue Engineering

Coupling of rapid prototyping techniques and surface-confined polymerizations allows the fabrication of 3D multidirectional gradients of biomolecules within microporous scaffolds. The compositional gradients can be tailored by polymer-brush-assisted diffusion of protein solutions. This technique allows spatial control over stem cells manipulation within 3D environments.