Andrea M. Dietrich

Manganese-oxidizing and -reducing microorganisms isolated from biofilms in chlorinated drinking water systems

The interaction of chemical, physical and biological factors that affect the fate, transport and redox cycling of manganese in engineered drinking water systems is not clearly understood. This research investigated the presence of Mn-oxidizing and -reducing bacteria in conventional water treatment plants exposed to different levels of chlorine. Mn(II)-oxidizing and Mn(IV)-reducing bacteria, principally Bacillus spp., were isolated from biofilm samples recovered from four separate drinking water systems. Rates of Mn-oxidation and -reduction for selected individual isolates were represented by pseudo-first-order kinetics. Pseudo-first-order rate constants were obtained for Mn-oxidation (range: 0.106-0.659 days(-1)), aerobic Mn-reduction (range: 0.036-0.152 days(-1)), and anaerobic Mn-reduction (range: 0.024-0.052 days(-1)). The results indicate that microbial-catalyzed Mn-oxidation and -reduction (aerobic and anaerobic) can take place simultaneously in aqueous environments exposed to considerable oxygen and chlorine levels and thus affect Mn-release and -deposition in drinking water systems. This has important implications for Mn-management strategies, which typically assume Mn-reduction is not possible in the presence of chlorine and oxidizing conditions.

Use of XPS to Identify the Oxidation State of Mn in Solid Surfaces of Filtration Media Oxide Samples from Drinking Water Treatment Plants

X-ray photoelectron spectroscopy (XPS) was used to identify Mn(II), Mn(III), and Mn(IV) in the surfaces of pure oxide standards and filtration media samples from drinking water treatment plants through the determination of the magnitude of the Mn 3s multiplet splitting and the position and shape of the Mn 3p photo-line. The Mn 3p region has been widely studied by applied physicists and surface scientists, but its application to identify the oxidation state of Mn in heterogeneous oxide samples has been limited. This study shows that the use of both the Mn 3s multiplet splitting and the position and shape of the Mn 3p photo-line provides a feasible means of determining the oxidation state of manganese in complex heterogeneous, environmentally important samples. Surface analysis of filtration media samples from several drinking water treatment plants was conducted. While Mn(IV) was predominant in most samples, a mixture of Mn(III) and Mn(IV) was also identified in some of the filtration media samples studied. The predominance of Mn(IV) in the media samples was felt to be related to the maintenance of free chlorine (HOCl) at substantial concentrations (2-5 mg*L(-1) as Cl2) across these filters. XPS could be a useful tool to further understand the specific mechanisms affecting soluble Mn removal using MnOx-coated filtration media.

Distribution of polyaromatic hydrocarbons in the water column and sediments of a drinking water reservoir with respect to boating activity

Abstract The potential impact of motorboat activity on a major drinking water reservoir was evaluated. Polyaromatic hydrocarbons (PAHs) were measured in water and sediment samples at both marina and nonmarina sites during peak boating activity in June 1990 and during low boating activity in October 1990. Total PAH concentration contour plots and statistical analyses were used to determine the impacts of boating activity. Total PAH concentrations of ⩽4 μg/l were present in the water during peak boating activity, but aqueous PAHs were not detected during low boating activity. PAHs were detected in the sediments during both sampling periods; sediment concentrations for total PAHs were generally

A systematic literature review and meta-analysis: The Theory of Planned Behavior's application to understand and predict nutrition-related behaviors in youth

BACKGROUND Efforts to reduce unhealthy dietary intake behaviors in youth are urgently needed. Theory-based interventions can be effective in promoting behavior change; one promising model is the Theory of Planned Behavior (TPB). PURPOSE The aim of this study was to determine, using a systematic literature review, how the TPB has been applied to investigate dietary behaviors, and to evaluate which constructs are associated with dietary behavioral intentions and behaviors in youth. METHODS Publications were identified by searching electronic databases, contacting experts in the field, and examining an evolving Internet-based TPB-specific bibliography. Studies including participants aged 2-18years, all TPB constructs discernible and measured with a description of how the variables were assessed and analyzed, were published in English and peer-reviewed journals, and focused on nutrition-related behaviors in youth were identified. Accompanying a descriptive statistical analysis was the calculation of effect sizes where possible, a two-stage meta-analysis, and a quality assessment using tenants from the Consolidated Standards of Reporting Trials (CONSORT) and Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) statements. RESULTS Thirty-four articles, including three intervention studies, were reviewed. The TPB was most often used to evaluate healthy eating and sugary snack and beverage consumption. Attitude had the strongest relationship with dietary behavioral intention (mean r=0.52), while intention was the most common predictor of behavior performance (mean r=0.38; both p<0.001). All three interventions revealed beneficial outcomes when using the TPB (e.g. η(2)=0.51 and ds=0.91, 0.89, and 0.79); extending the Theory with implementation intentions may enhance its effectiveness (e.g. η(2)=0.76). CONCLUSIONS Overall, the TPB may be an effective framework to identify and understand child and adolescent nutrition-related behaviors, allowing for the development of tailored initiatives targeting poor dietary practices in youth. However, support from the literature is primarily from observational studies and a greater effort towards examining these relationships within intervention studies is needed.

Simultaneous degradation of disinfection byproducts and earthy-musty odorants by the UV/H2O2 advanced oxidation process

Advanced treatment technologies that control multiple contaminants are beneficial to drinking water treatment. This research applied UV/H(2)O(2) for the simultaneous degradation of geosmin, 2-methylisoborneol, four trihalomethanes and six haloacetic acids. Experiments were conducted in de-ionized water at 24 ± 1.0 °C with ng/L amounts of odorants and μg/L amounts of disinfection byproducts. UV was applied with and without 6 mg/L H(2)O(2.) The results demonstrated that brominated trihalomethanes and brominated haloacetic acids were degraded to a greater extent than geosmin and 2-methylisoborneol. Tribromomethane and dibromochloromethane were degraded by 99% and 80% respectively at the UV dose of 1200 mJ/cm(2) with 6 mg/L H(2)O(2), whereas 90% of the geosmin and 60% of the 2-methylisoborneol were removed. Tribromoacetic acid and dibromoacetic acid were degraded by 99% and 80% respectively under the same conditions. Concentrations of trichloromethane and chlorinated haloacetic acids were not substantially reduced under these conditions and were not effectively removed at doses designed to remove geosmin and 2-methylisoborneol. Brominated compounds were degraded primarily by direct photolysis and cleavage of the C-Br bond with pseudo first order rate constants ranging from 10(-3) to 10(-2) s(-1). Geosmin and 2-methylisoborneol were primarily degraded by reaction with hydroxyl radical with direct photolysis as a minor factor. Perchlorinated disinfection byproducts were degraded by reaction with hydroxyl radicals. These results indicate that the UV/H(2)O(2) can be applied to effectively control both odorants and brominated disinfection byproducts.

Age-associated variation in sensory perception of iron in drinking water and the potential for overexposure in the human population.

Humans interact with their environment through the five senses, but little is known about population variability in the ability to assess contaminants. Sensory thresholds and biochemical indicators of metallic flavor perception in humans were evaluated for ferrous (Fe(2+)) iron in drinking water; subjects aged 19-84 years participated. Metallic flavor thresholds for individuals and subpopulations based on age were determined. Oral lipid oxidation and oral pH were measured in saliva as potential biochemical indicators. Individual thresholds were 0.007-14.14 mg/L Fe(2+) and the overall population threshold was 0.17 mg/L Fe(2+) in reagent water. Average thresholds for individuals younger and older than 50 years of age (grouped by the daily recommended nutritional guidelines for iron intake) were significantly different (p = 0.013); the population thresholds for each group were 0.045 mg/L Fe(2+) and 0.498 mg/L Fe(2+), respectively. Many subjects >50 and a few subjects <50 years were insensitive to metallic flavor. There was no correlation between age, oral lipid oxidation, and oral pH. Standardized olfactory assessment found poor sensitivity for Fe(2+) corresponded with conditions of mild, moderate, and total anosmia. The findings demonstrate an age-dependent sensitivity to iron indicating as people age they are less sensitive to metallic perception.

Fate and Transport of Copper-based Crop Protectants in Plasticulture Runoff and the Impact of Sedimentation as a Best Management Practice

The fate and distribution of copper-based crop protectants, applied to plasticulture tomato fields to protect against disease, were investigated in a greenhouse-scale simulation of farming conditions in a coastal environment. Following rainfall, 99% of the applied copper was found to remain on the fields sorbed to the soil and plants; most of the soil-bound copper was found sorbed to the top 2.5 cm of soil between the plasticulture rows. Of the copper leaving the agricultural fields, 82% was found in the runoff with the majority, 74%. sorbed to the suspended solids. The remaining copper, 18%, leached through the soil and entered the groundwater with 10% in the dissolved phase and 8% sorbed to suspended solids. Although only 1% copper was found to leave the field, this was sufficient to cause high copper concentrations (average 2102+/-433 microg/L total copper and 189+/-139 microg/L dissolved copper) in the runoff. Copper concentrations in groundwater samples were also high (average 312+/-198 microg/L total copper and 216+/-99 microg/L dissolved copper). Sedimentation, a best management practice for reducing copper loadings. was found to reduce the total copper concentrations in runoff by 90% to a concentration of 245+/-127 microg/L; however, dissolved copper concentrations remained stable, averaging 139+/-55 microg/L. Total copper concentrations were significantly reduced by the effective removal of suspended solids with sorbed copper.

Role of hydrophobicity in bacterial adherence to carbon nanostructures and biofilm formation.

The role of cell and surface hydrophobicity in the adherence of the waterborne bacterium Mycobacterium smegmatis to nanostructures and biofilm formation was investigated. Carbon nanostructures (CNs) were synthesized using a flame reactor and deposited on stainless steel grids and foils, and on silicon wafers that had different initial surface hydrophobicities. Surface hydrophobicity was measured as the contact angle of water droplets. The surfaces were incubated in suspensions of isogenic hydrophobic and hydrophilic strains of M. smegmatis and temporal measurements of the numbers of adherent cells were made. The hydrophobic, rough mutant of M. smegmatis adhered more readily and formed denser biofilms on all surfaces compared to its hydrophilic, smooth parent. Biofilm formation led to alterations in the hydrophobicity of the substratum surfaces, demonstrating that bacterial cells attached to CNs are capable of modifying the surface characteristics.

Application of XPS and solution chemistry analyses to investigate soluble manganese removal by MnO(x)(s)-coated media.

X-ray photoelectron spectroscopy (XPS) was applied to investigate Mn(II) removal by MnO(x)(s)-coated media under experimental conditions similar to the engineered environment of drinking water treatment plants in the absence and presence of chlorine. Macroscopic and spectroscopic results suggest that Mn(II) removal at pH 6.3 and pH 7.2 in the absence of chlorine was mainly due to adsorption onto the MnO(x)(s) surface coating, while removal in the presence of chlorine was due to a combination of initial surface adsorption followed by subsequent surface-catalyzed oxidation. However, Mn(III) was identified by XPS analyses of the Mn 3p photoline for experiments performed in the absence of chlorine at pH 6.3 and pH 7.2, suggesting that surface-catalyzed Mn oxidation also occurred at these conditions. Results obtained at pH 8.2 at 8 and 0.5 mg·L(-1) dissolved oxygen in the absence of chlorine suggest that Mn(II) removal was mainly due to initial adsorption followed by surface-catalyzed oxidation. XPS analyses suggest that Mn(IV) was the predominant species in experiments operated in the presence of chlorine. This study confirms that the use of chlorine combined with the catalytic action of MnO(x)(s) oxides is effective for Mn(II) removal from drinking water filtration systems.

Evaluation of Iron Release Models for Water Distribution Systems

Recent efforts have led to the development of a number of models that predict the occurrence of iron release and subsequent red water formation in water distribution systems. The authors analyze these recently developed iron release models. The factors influencing iron release are derived from water chemistry, biological processes, composition of pipe scale, and hydraulic flow characteristics within the pipe. Although a variety of factors lead to iron release, there is no consensus as to the quantitative extent that each factor contributes. This lack of consensus is made evident when comparing each of the iron release models. Although each model may be beneficial for simulating certain mechanisms of iron release, no single model has been developed that provides a comprehensive portrayal of iron release phenomena.