Andreas Mavrandonakis

Improving Hydrogen Storage Capacity of MOF by Functionalization of the Organic Linker with Lithium Atoms

A combination of quantum and classical calculations have been performed in order to investigate hydrogen storage in metal-organic frameworks (MOFs) modified by lithium alkoxide groups. Ab initio calculations showed that the interaction energies between the hydrogen molecules and this functional group are up to three times larger compared with unmodified MOF. This trend was verified by grand canonical Monte Carlo (GCMC) simulations in various thermodynamic conditions. The gravimetric capacity of the Li-modified MOFs reached the value of 10 wt % at 77 K and 100 bar, while our results are very promising at room temperature, too, with 4.5 wt %.

Ab initio Study of the Interactions between CO 2 and N-Containing Organic Heterocycles

In the garden of dispersion: High-accuracy ab initio calculations are performed to determine the nature of the interactions and the most favorable geometries between CO(2) and heteroaromatic molecules containing nitrogen (see figure). Dispersion forces play a key role in the stabilization of the dimer, because correlation effects represent about 50 % of the total interaction energy. The interactions between carbon dioxide and organic heterocyclic molecules containing nitrogen are studied by using high-accuracy ab initio methods. Various adsorption positions are examined for pyridine. The preferred configuration is an in-plane configuration. An electron donor-electron acceptor (EDA) mechanism between the carbon of CO(2) and the nitrogen of the heterocycle and weak hydrogen bonds stabilize the complex, with important contributions from dispersion and induction forces. Quantitative results of the binding energy of CO(2) to pyridine (C(5)H(5)N), pyrimidine, pyridazine, and pyrazine (C(4)H(4)N(2)), triazine (C(3)H(3)N(3)), imidazole (C(3)H(4)N(2)), tetrazole (CH(2)N(4)), purine (C(5)H(4)N(4)), imidazopyridine (C(6)H(5)N(3)), adenine (C(5)H(5)N(5)), and imidazopyridamine (C(6)H(6)N(4)) for the in-plane configuration are presented. For purine, three different binding sites are examined. An approximate coupled-cluster model including single and double excitations with a perturbative estimation of triple excitations (CCSD(T)) is used for benchmark calculations. The CCSD(T) basis-set limit is approximated from explicitly correlated second-order Møller-Plesset (MP2-F12) calculations in the aug-cc-pVTZ basis in conjunction with contributions from single, double, and triple excitations calculated at the CCSD(T)/6-311++G** level of theory. Extrapolations to the MP2 basis-set limit coincide with the MP2-F12 calculations. The results are interpreted in terms of electrostatic potential maps and electron density redistribution plots. The effectiveness of density functional theory with the empirical dispersion correction of Grimme (DFT-D) is also examined.

Pyrazolate-Based Cobalt(II)-Containing Metal–Organic Frameworks in Heterogeneous Catalytic Oxidation Reactions: Elucidating the Role of Entatic States for Biomimetic Oxidation Processes

Crystal structures of two metal-organic frameworks (MFU-1 and MFU-2) are presented, both of which contain redox-active Co(II) centres coordinated by linear 1,4-bis[(3,5-dimethyl)pyrazol-4-yl] ligands. In contrast to many MOFs reported previously, these compounds show excellent stability against hydrolytic decomposition. Catalytic turnover is achieved in oxidation reactions by employing tert-butyl hydroperoxide and the solid catalysts are easily recovered from the reaction mixture. Whereas heterogeneous catalysis is unambiguously demonstrated for MFU-1, MFU-2 shows catalytic activity due to slow metal leaching, emphasising the need for a deeper understanding of structure-reactivity relationships in the future design of redox-active metal-organic frameworks. Mechanistic details for oxidation reactions employing tert-butyl hydroperoxide are studied by UV/Vis and IR spectroscopy and XRPD measurements. The catalytic process accompanying changes of redox states and structural changes were investigated by means of cobalt K-edge X-ray absorption spectroscopy. To probe the putative binding modes of molecular oxygen, the isosteric heats of adsorption of O(2) were determined and compared with models from DFT calculations. The stabilities of the frameworks in an oxygen atmosphere as a reactive gas were examined by temperature-programmed oxidation (TPO). Solution impregnation of MFU-1 with a co-catalyst (N-hydroxyphthalimide) led to NHPI@MFU-1, which oxidised a range of organic substrates under ambient conditions by employing molecular oxygen from air. The catalytic reaction involved a biomimetic reaction cascade based on free radicals. The concept of an entatic state of the cobalt centres is proposed and its relevance for sustained catalytic activity is briefly discussed.

Enhancement of hydrogen adsorption in metal-organic frameworks by the incorporation of the sulfonate group and Li cations. A multiscale computational study.

By means of ab initio methods, the effect on the H(2) storage ability of a newly proposed organic linker for IRMOF-14 has been studied. The linker comprises a negatively charged sulfonate (-SO(3)(-1)) group in combination with a Li cation. It is found that these two charged groups significantly increase the interaction energy between the hydrogen molecules and the new proposed organic linker of the MOF. The substituted group of the linker may host up to six hydrogen molecules with an average interaction energy of 1.5 kcal/mol per H(2) molecule. This value is three times larger than the binding energy over the bare linker that has been obtained from DFT calculations. GCMC atomistic simulations verified that the proposed material can be qualified among the highest adsorbing materials for volumetric capture of H(2), especially at ambient conditions. This functionalization strategy can be applied in many different MOF structures to enhance their storage abilities.

Highly Effective Hydrogen Isotope Separation in Nanoporous Metal–Organic Frameworks with Open Metal Sites: Direct Measurement and Theoretical Analysis

Separating gaseous mixtures that consist of very similar size is one of the critical issues in modern separation technology. Especially, the separation of the isotopes hydrogen and deuterium requires special efforts, even though these isotopes show a very large mass ratio. Conventionally, H/D separation can be realized through cryogenic distillation of the molecular species or the Girdler-sulfide process, which are among the most energy-intensive separation techniques in the chemical industry. However, costs can be significantly reduced by using highly mass-selective nanoporous sorbents. Here, we describe a hydrogen isotope separation strategy exploiting the strongly attractive open metal sites present in nanoporous metal-organic frameworks of the CPO-27 family (also referred to as MOF-74). A theoretical analysis predicts an outstanding hydrogen isotopologue separation at open metal sites due to isotopal effects, which has been directly observed through cryogenic thermal desorption spectroscopy. For H2/D2 separation of an equimolar mixture at 60 K, the selectivity of 12 is the highest value ever measured, and this methodology shows extremely high separation efficiencies even above 77 K. Our theoretical results imply also a high selectivity for HD/H2 separation at similar temperatures, and together with catalytically active sites, we propose a mechanism to produce D2 from HD/H2 mixtures with natural or enriched deuterium content.

On the mechanism of hydrogen activation by frustrated Lewis pairs.

We report herein a comprehensive theoretical study of the thermodynamics and kinetics of molecular hydrogen activation by frustrated Lewis pairs (FLPs). A series of intermolecularly combined boranes (Lewis acids) and phosphines (Lewis bases), with experimentally established different reactivities towards H2, have been subjected to DFT and (SCS-)MP2 calculations, and analyzed in terms of their structural properties, the energetics of association of the FLPs, and the kinetics of their interactions with H2 and hydrogenation to the ion-pair products. The analysis included the following steps: 1) assessment of the ability/inability of the Lewis species to preorganize into FLPs with an optimum arrangement of the acid and base sites for preconditioning the reaction with H2 , 2) comprehension of the different thermodynamics of hydrogenation of the selected FLPs by comparing the Gibbs energies of the overall reactions, and 3) estimation of the mechanism of the activation of H2 by identifying the reaction steps and the associated kinetic barriers. The results of our studies correlate well with experimental findings and have clarified the reasons for the observed different reactivities of the investigated systems, ranging from reversible or nonreversible activation to no reaction with H2. The derived predictions could assist the future design of Lewis acid-base systems with desired properties and applicability as metal-free hydrogenation catalysts.

Silicon carbide nanotube tips: Promising materials for atomic force microscopy and/or scanning tunneling microscopy

Using ab initio techniques we examine the structural properties and energetics of novel nanotip and nanocone materials based on silicon carbide nanotubes. The effect of various structural and topological defects on the highest occupied molecular orbital (HOMO)–lowest unoccupied molecular orbital (LUMO) gap and the stability of these tips are investigated. The HOMO-LUMO gaps range from zero to 2.0eV due to the defects, providing possible applications in band gap engineering. These tips which combine the elastic and mechanical properties of nanotubes with the stiffness of silicon carbide materials can find applications as atomic force microscopy and scanning tunneling microscopy probes.

Ab initio study of the adsorption of small molecules on metal-organic frameworks with oxo-centered trimetallic building units: The role of the undercoordinated metal ion

The interactions of H2, CO, CO2, and H2O with the undercoordinated metal centers of the trimetallic oxo-centered M3(III)(μ3-O)(X) (COO)6 moiety are studied by means of wave function and density functional theory. This trimetallic oxo-centered cluster is a common building unit in several metal-organic frameworks (MOFs) such as MIL-100, MIL-101, and MIL-127 (also referred to as soc-MOF). A combinatorial computational screening is performed for a large variety of trimetallic oxo-centered units M3(III)O (M = Al(3+), Sc(3+), V(3+), Cr(3+), Fe(3+), Ga(3+), Rh(3+), In(3+), Ir(3+)) interacting with H2O, H2, CO, and CO2. The screening addresses interaction energies, adsorption enthalpies, and vibrational properties. The results show that the Rh and Ir analogues are very promising materials for gas storage and separations.

Capture of heavy hydrogen isotopes in a metal-organic framework with active Cu(I) sites

The production of pure deuterium and the removal of tritium from nuclear waste are the key challenges in separation of light isotopes. Presently, the technological methods are extremely energy- and cost-intensive. Here we report the capture of heavy hydrogen isotopes from hydrogen gas by selective adsorption at Cu(I) sites in a metal-organic framework. At the strongly binding Cu(I) sites (32 kJ mol−1) nuclear quantum effects result in higher adsorption enthalpies of heavier isotopes. The capture mechanism takes place most efficiently at temperatures above 80 K, when an isotope exchange allows the preferential adsorption of heavy isotopologues from the gas phase. Large difference in adsorption enthalpy of 2.5 kJ mol−1 between D2 and H2 results in D2-over-H2 selectivity of 11 at 100 K, to the best of our knowledge the largest value known to date. Combination of thermal desorption spectroscopy, Raman measurements, inelastic neutron scattering and first principles calculations for H2/D2 mixtures allows the prediction of selectivities for tritium-containing isotopologues.

Theoretical analysis of hydrogen spillover mechanism on carbon nanotubes

The spillover mechanism of molecular hydrogen on carbon nanotubes in the presence of catalytically active platinum clusters was critically and systematically investigated by using density-functional theory. Our simulation model includes a Pt4 cluster for the catalyst nanoparticle and curved and planar circumcoronene for two exemplary single-walled carbon nanotubes (CNT), the (10,10) CNT and one of large diameter, respectively. Our results show that the H2 molecule dissociates spontaneously on the Pt4 cluster. However, the dissociated H atoms have to overcome a barrier of more than 2 eV to migrate from the catalyst to the CNT, even if the Pt4 cluster is at full saturation with six adsorbed and dissociated hydrogen molecules. Previous investigations have shown that the mobility of hydrogen atoms on the CNT surface is hindered by a barrier. We find that instead the Pt4 catalyst may move along the outer surface of the CNT with activation energy of only 0.16 eV, and that this effect offers the possibility of full hydrogenation of the CNT. Thus, although we have not found a low-energy pathway to spillover onto the CNT, we suggest, based on our calculations and calculated data reported in the literature, that in the hydrogen-spillover process the observed saturation of the CNT at hydrogen background pressure occurs through mobile Pt nanoclusters, which move on the substrate more easily than the substrate-chemisorbed hydrogens, and deposit or reattach hydrogens in the process. Initial hydrogenation of the carbon substrate, however, is thermodynamically unfavoured, suggesting that defects should play a significant role.