Andrew C. Weitz

Formation of a Room Temperature Stable Fe V (O) Complex: Reactivity Toward Unactivated C−H Bonds

An Fe(V)(O) complex has been synthesized from equimolar solutions of (Et4N)2[Fe(III)(Cl)(biuret-amide)] and mCPBA in CH3CN at room temperature. The Fe(V)(O) complex has been characterized by UV-vis, EPR, Mössbauer, and HRMS and shown to be capable of oxidizing a series of alkanes having C-H bond dissociation energies ranging from 99.3 kcal mol(-1) (cyclohexane) to 84.5 kcal mol(-1) (cumene). Linearity in the Bell-Evans-Polayni graph and the finding of a large kinetic isotope effect suggest that hydrogen abstraction is engaged the rate-determining step.

Endoperoxide formation by an α-ketoglutarate-dependent mononuclear non-haem iron enzyme

Many peroxy-containing secondary metabolites have been isolated and shown to provide beneficial effects to human health. Yet, the mechanisms of most endoperoxide biosyntheses are not well understood. Although endoperoxides have been suggested as key reaction intermediates in several cases, the only well-characterized endoperoxide biosynthetic enzyme is prostaglandin H synthase, a haem-containing enzyme. Fumitremorgin B endoperoxidase (FtmOx1) from Aspergillus fumigatus is the first reported α-ketoglutarate-dependent mononuclear non-haem iron enzyme that can catalyse an endoperoxide formation reaction. To elucidate the mechanistic details for this unique chemical transformation, we report the X-ray crystal structures of FtmOx1 and the binary complexes it forms with either the co-substrate (α-ketoglutarate) or the substrate (fumitremorgin B). Uniquely, after α-ketoglutarate has bound to the mononuclear iron centre in a bidentate fashion, the remaining open site for oxygen binding and activation is shielded from the substrate or the solvent by a tyrosine residue (Y224). Upon replacing Y224 with alanine or phenylalanine, the FtmOx1 catalysis diverts from endoperoxide formation to the more commonly observed hydroxylation. Subsequent characterizations by a combination of stopped-flow optical absorption spectroscopy and freeze-quench electron paramagnetic resonance spectroscopy support the presence of transient radical species in FtmOx1 catalysis. Our results help to unravel the novel mechanism for this endoperoxide formation reaction.

Unsymmetrical bimetallic complexes with M(II)-(μ-OH)-M(III) cores (M(II)M(III) = Fe(II)Fe(III), Mn(II)Fe(III), Mn(II)Mn(III)): structural, magnetic, and redox properties.

Heterobimetallic cores are important units within the active sites of metalloproteins but are often difficult to duplicate in synthetic systems. We have developed a synthetic approach for the preparation of a complex with a Mn(II)-(μ-OH)-Fe(III) core, in which the metal centers have different coordination environments. Structural and physical data support the assignment of this complex as a heterobimetallic system. A comparison with analogous homobimetallic complexes, Mn(II)-(μ-OH)-Mn(III) and Fe(II)-(μ-OH)-Fe(III) cores, further supports this assignment.

Tuning the Reactivity of FeV(O) toward C–H Bonds at Room Temperature: Effect of Water

The presence of an FeV(O) species has been postulated as the active intermediate for the oxidation of both C–H and C=C bonds in the Rieske dioxygenase family of enzymes. Understanding the reactivity of these high valent iron–oxo intermediates, especially in an aqueous medium, would provide a better understanding of these enzymatic reaction mechanisms. The formation of an FeV(O) complex at room temperature in an aqueous CH3CN mixture that contains up to 90% water using NaOCl as the oxidant is reported here. The stability of FeV(O) decreases with increasing water concentration. We show that the reactivity of FeV(O) toward the oxidation of C–H bonds, such as those in toluene, can be tuned by varying the amount of water in the H2O/CH3CN mixture. Rate acceleration of up to 60 times is observed for the oxidation of toluene upon increasing the water concentration. The role of water in accelerating the rate of the reaction has been studied using kinetic measurements, isotope labeling experiments, and density functional theory (DFT) calculations. A kinetic isotope effect of ∼13 was observed for the oxidation of toluene and d8-toluene showing that C–H abstraction was involved in the rate-determining step. Activation parameters determined for toluene oxidation in H2O/CH3CN mixtures on the basis of Eyring plots for the rate constants show a gain in enthalpy with a concomitant loss in entropy. This points to the formation of a more-ordered transition state involving water molecules. To further understand the role of water, we performed a careful DFT study, concentrating mostly on the rate-determining hydrogen abstraction step. The DFT-optimized structure of the starting FeV(O) and the transition state indicates that the rate enhancement is due to the transition state’s favored stabilization over the reactant due to enhanced hydrogen bonding with water.

Modular Artificial Cupredoxins

Cupredoxins are electron-transfer proteins that have active sites containing a mononuclear Cu center with an unusual trigonal monopyramidal structure (Type 1 Cu). A single Cu-Scys bond is present within the trigonal plane that is responsible for its unique physical properties. We demonstrate that a cysteine-containing variant of streptavidin (Sav) can serve as a protein host to model the structure and properties of Type 1 Cu sites. A series of artificial Cu proteins are described that rely on Sav and a series of biotinylated synthetic Cu complexes. Optical and EPR measurements highlight the presence of a Cu-Scys bond, and XRD analysis provides structural evidence. We further provide evidence that changes in the linker between the biotin and Cu complex within the synthetic constructs allows for small changes in the placement of Cu centers within Sav that have dramatic effects on the structural and physical properties of the resulting artificial metalloproteins. These findings highlight the utility of the biotin-Sav technology as an approach for simulating active sites of metalloproteins.

NaClO-Generated Iron(IV)oxo and Iron(V)oxo TAMLs in Pure Water

The unique properties of entirely aliphatic TAML activator [FeIII{(Me2CNCOCMe2NCO)2CMe2}OH2]- (3), namely the increased steric bulk of the ligand and the unmatched resistance to the acid-induced demetalation, enables the generation of high-valent iron derivatives in pure water at any pH. An iron(V)oxo species is readily produced with NaClO at pH values from 2 to 10.6 without any observable intermediate. This is the first reported example of iron(V)oxo formed in pure water. At pH 13, iron(V)oxo is not formed and NaClO oxidizes 3 to an iron(IV)oxo derivative.

A Diferrous-Dinitrosyl Intermediate in the N2O-Generating Pathway of a Deflavinated Flavo-Diiron Protein

Flavo-diiron proteins (FDPs) function as anaerobic nitric oxide scavengers in some microorganisms, catalyzing reduction of nitric to nitrous oxide. The FDP from Thermotoga maritima can be prepared in a deflavinated form with an intact diferric site (deflavo-FDP). Hayashi et al. [(2010) Biochemistry 49, 7040–7049] reported that reaction of NO with reduced deflavo-FDP produced substoichiometric N2O. Here we report a multispectroscopic approach to identify the iron species in the reactions of deflavo-FDP with NO. Mössbauer spectroscopy identified two distinct ferrous species after reduction of the antiferromagnetically coupled diferric site. Approximately 60% of the total ferrous iron was assigned to a diferrous species associated with the N2O-generating pathway. This pathway proceeds through successive diferrous-mononitrosyl (S = 1/2 FeII{FeNO}7) and diferrous-dinitrosyl (S = 0 [{FeNO}7]2) species that form within ∼100 ms of mixing of the reduced protein with NO. The diferrous-dinitrosyl intermediate converted to an antiferromagnetically coupled diferric species that was spectroscopically indistinguishable from that in the starting deflavinated protein. These diiron species closely resembled those reported for the flavinated FDP [Caranto et al. (2014) J. Am. Chem. Soc. 136, 7981–7992], and the time scales of their formation and decay were consistent with the steady state turnover of the flavinated protein. The remaining ∼40% of ferrous iron was inactive in N2O generation but reversibly bound NO to give an S = 3/2 {FeNO}7 species. The results demonstrate that N2O formation in FDPs can occur via conversion of S = 0 [{FeNO}7]2 to a diferric form without participation of the flavin cofactor.

Spectroscopic and Reactivity Comparisons of a Pair of bTAML Complexes with FeV=O and FeIV=O Units

In this report we compare the geometric and electronic structures and reactivities of [FeV(O)]- and [FeIV(O)]2- species supported by the same ancillary nonheme biuret tetraamido macrocyclic ligand (bTAML). Resonance Raman studies show that the Fe═O vibration of the [FeIV(O)]2- complex 2 is at 798 cm-1, compared to 862 cm-1 for the corresponding [FeV(O)]- species 3, a 64 cm-1 frequency difference reasonably reproduced by density functional theory calculations. These values are, respectively, the lowest and the highest frequencies observed thus far for nonheme high-valent Fe═O complexes. Extended X-ray absorption fine structure analysis of 3 reveals an Fe═O bond length of 1.59 Å, which is 0.05 Å shorter than that found in complex 2. The redox potentials of 2 and 3 are 0.44 V (measured at pH 12) and 1.19 V (measured at pH 7) versus normal hydrogen electrode, respectively, corresponding to the [FeIV(O)]2-/[FeIII(OH)]2- and [FeV(O)]-/[FeIV(O)]2- couples. Consistent with its higher potential (even after correcting for the pH difference), 3 oxidizes benzyl alcohol at pH 7 with a second-order rate constant that is 2500-fold bigger than that for 2 at pH 12. Furthermore, 2 exhibits a classical kinteic isotope effect (KIE) of 3 in the oxidation of benzyl alcohol to benzaldehyde versus a nonclassical KIE of 12 for 3, emphasizing the reactivity differences between 2 and 3.

Spectroscopy and DFT Calculations of a Flavo-diiron Enzyme Implicate New Diiron Site Structures

Flavo-diiron proteins (FDPs) are non-heme iron containing enzymes that are widespread in anaerobic bacteria, archaea, and protozoa, serving as the terminal components to dioxygen and nitric oxide reductive scavenging pathways in these organisms. FDPs contain a dinuclear iron active site similar to that in hemerythrin, ribonucleotide reductase, and methane monooxygenase, all of which can bind NO and O2. However, only FDP competently turns over NO to N2O. Here, EPR and Mössbauer spectroscopies allow electronic characterization of the diferric and diferrous species of FDP. The exchange-coupling constant J (Hex = JS1·S2) was found to increase from +20 cm-1 to +32 cm-1 upon reduction of the diferric to the diferrous species, indicative of (1) at least one hydroxo bridge between the iron ions for both states and (2) a change to the diiron core structure upon reduction. In comparison to characterized diiron proteins and synthetic complexes, the experimental values were consistent with a dihydroxo bridged diferric core, which loses one hydroxo bridge upon reduction. DFT calculations of these structures gave values of J and Mössbauer parameters in agreement with experiment. Although the crystal structure shows a hydrogen bond between the iron bound aspartate and the bridging solvent molecule, the DFT calculations of structures consistent with the crystal structure gave calculated values of J incompatible with the spectroscopic results. We conclude that the crystal structure of the diferric state does not represent the frozen solution structure and that a mono-μ-hydroxo diferrous species is the catalytically functional state that reacts with NO and O2. The new EPR spectroscopic probe of the diferric state indicated that the diferric structure of FDP prior to and immediately after turnover with NO are flavin mononucleotide (FMN) dependent, implicating an additional proton transfer role for FMN in turnover of NO.

Structure and Spectroscopy of Alkene-Cleaving Dioxygenases Containing an Atypically Coordinated Non-Heme Iron Center.

Carotenoid cleavage oxygenases (CCOs) are non-heme iron enzymes that catalyze scission of alkene groups in carotenoids and stilbenoids to form biologically important products. CCOs possess a rare four-His iron center whose resting-state structure and interaction with substrates are incompletely understood. Here, we address this knowledge gap through a comprehensive structural and spectroscopic study of three phyletically diverse CCOs. The crystal structure of a fungal stilbenoid-cleaving CCO, CAO1, reveals strong similarity between its iron center and those of carotenoid-cleaving CCOs, but with a markedly different substrate-binding cleft. These enzymes all possess a five-coordinate high-spin Fe(II) center with resting-state Fe-His bond lengths of ∼2.15 Å. This ligand set generates an iron environment more electropositive than those of other non-heme iron dioxygenases as observed by Mössbauer isomer shifts. Dioxygen (O2) does not coordinate iron in the absence of substrate. Substrates bind away (∼4.7 Å) from the iron and have little impact on its electronic structure, thus excluding coordination-triggered O2 binding. However, substrate binding does perturb the spectral properties of CCO Fe-NO derivatives, indicating proximate organic substrate and O2-binding sites, which might influence Fe-O2 interactions. Together, these data provide a robust description of the CCO iron center and its interactions with substrates and substrate mimetics that illuminates commonalities as well as subtle and profound structural differences within the CCO family.