Andrew J. Pearson

Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition

We report the use of ultra-sonic spray-coating under ambient conditions as a deposition technique for the fabrication of planar heterojunction CH3NH3PbI3−xClx perovskite solar cells. We make a first optimization of processing parameter space using this deposition technique, and explore the role of the temperature of the substrate during spray-casting, the volatility of the casting solvent and the post deposition anneal on determining the efficiency of the resultant solar cells. We find that maximum device efficiency is correlated with the creation of dense films having a surface coverage above 85%. When such films are incorporated into a solar cell device, power conversion efficiencies of up to 11% are realized. These results demonstrate that spray-coating can be used in the large-area, low-cost manufacture of high efficiency solution-processed perovskite solar cells.

Depletion of PCBM at the Cathode Interface in P3HT/PCBM Thin Films as Quantified via Neutron Reflectivity Measurements

[*] Dr. A. J. Parnell, A. J. Pearson, Dr. P. A. Staniec, A. J. C. Dennison, Dr. H. Hamamatsu, Prof. D. G. Lidzey, Prof. R. A. L. Jones Department of Physics and Astronomy, The University of Sheffield Hicks Building, Hounsfield Road, Sheffield, S3 7RH (UK) E-mail: a.j.parnell@sheffield.ac.uk; d.g.lidzey@sheffield.ac.uk Dr. A. D. F. Dunbar Department of Chemical and Process Engineering, The University of Sheffield Sir Robert Hadfield Building, Mappin St, Sheffield S1 3JD (UK)

The role of dynamic measurements in correlating structure with optoelectronic properties in polymer:fullerene bulk-heterojunction solar cells

The characterization of morphology in blend thin-films of conjugated polymers and functionalized fullerenes is a critical aspect in organic photovoltaic (OPV) device research. Understanding the links between thin-film processing conditions, film nanostructure and photocurrent generation efficiency is necessary in order to develop this technology for commercial viability. Here, we review recent developments of experimental studies that probe sample nanostructure formation and modification during the processing steps commonly used in OPV device fabrication, potentially offering a deeper insight and more rational understating of these conditions.

High Open-Circuit Voltages in Tin-Rich Low-Bandgap Perovskite-Based Planar Heterojunction Photovoltaics

Low-bandgap CH3 NH3 (Pbx Sn1-x )I3 (0 ≤ x ≤ 1) hybrid perovskites (e.g., ≈1.5-1.1 eV) demonstrating high surface coverage and superior optoelectronic properties are fabricated. State-of-the-art photovoltaic (PV) performance is reported with power conversion efficiencies approaching 10% in planar heterojunction architecture with small (<450 meV) energy loss compared to the bandgap and high (>100 cm2 V-1 s-1 ) intrinsic carrier mobilities.

Correlating molecular morphology with optoelectronic function in solar cells based on low band-gap copolymer:fullerene blends

We review recent progress in the development of organic bulk heterojunction (BHJ) solar cells employing donor–acceptor copolymers as the electron-donor and fullerene derivatives as the electron-acceptor. We discuss the role of the donor and acceptor moieties, side-chains, bridging units and atomic substitutions of the copolymers on their optoelectronic functionality. The physical properties, e.g. molecular conformation, miscibility, phase-separated lateral and vertical morphology, of various photovoltaic blends prepared via solution casting and post-treatments are reviewed and correlated with photovoltaic device performance. Factors influencing the morphological stability of polymer:fullerene BHJ thin-films are briefly discussed. Finally, we address the use of thin organic interlayers to increase the efficiency of BHJ solar cells.

Maximizing and stabilizing luminescence from halide perovskites with potassium passivation

Metal halide perovskites are of great interest for various high-performance optoelectronic applications. The ability to tune the perovskite bandgap continuously by modifying the chemical composition opens up applications for perovskites as coloured emitters, in building-integrated photovoltaics, and as components of tandem photovoltaics to increase the power conversion efficiency. Nevertheless, performance is limited by non-radiative losses, with luminescence yields in state-of-the-art perovskite solar cells still far from 100 per cent under standard solar illumination conditions. Furthermore, in mixed halide perovskite systems designed for continuous bandgap tunability (bandgaps of approximately 1.7 to 1.9 electronvolts), photoinduced ion segregation leads to bandgap instabilities. Here we demonstrate substantial mitigation of both non-radiative losses and photoinduced ion migration in perovskite films and interfaces by decorating the surfaces and grain boundaries with passivating potassium halide layers. We demonstrate external photoluminescence quantum yields of 66 per cent, which translate to internal yields that exceed 95 per cent. The high luminescence yields are achieved while maintaining high mobilities of more than 40 square centimetres per volt per second, providing the elusive combination of both high luminescence and excellent charge transport. When interfaced with electrodes in a solar cell device stack, the external luminescence yield—a quantity that must be maximized to obtain high efficiency—remains as high as 15 per cent, indicating very clean interfaces. We also demonstrate the inhibition of transient photoinduced ion-migration processes across a wide range of mixed halide perovskite bandgaps in materials that exhibit bandgap instabilities when unpassivated. We validate these results in fully operating solar cells. Our work represents an important advance in the construction of tunable metal halide perovskite films and interfaces that can approach the efficiency limits in tandem solar cells, coloured-light-emitting diodes and other optoelectronic applications.

Molecular weight dependent vertical composition profiles of PCDTBT:PC71BM blends for organic photovoltaics

We have used Soxhlet solvent purification to fractionate a broad molecular weight distribution of the polycarbazole polymer PCDTBT into three lower polydispersity molecular weight fractions. Organic photovoltaic devices were made using a blend of the fullerene acceptor PC71BM with the molecular weight fractions. An average power conversion efficiency of 5.89% (peak efficiency of 6.15%) was measured for PCDTBT blend devices with a number average molecular weight of Mn = 25.5 kDa. There was significant variation between the molecular weight fractions with low (Mn = 15.0 kDa) and high (Mn = 34.9 kDa) fractions producing devices with average efficiencies of 5.02% and 3.70% respectively. Neutron reflectivity measurements on these polymer:PC71BM blend layers showed that larger molecular weights leads to an increase in the polymer enrichment layer thickness at the anode interface, this improves efficiency up to a limiting point where the polymer solubility causes a reduction of the PCDTBT concentration in the active layer.

Sub-nanometre resolution imaging of polymer-fullerene photovoltaic blends using energy-filtered scanning electron microscopy

The resolution capability of the scanning electron microscope has increased immensely in recent years, and is now within the sub-nanometre range, at least for inorganic materials. An equivalent advance has not yet been achieved for imaging the morphologies of nanostructured organic materials, such as organic photovoltaic blends. Here we show that energy-selective secondary electron detection can be used to obtain high-contrast, material-specific images of an organic photovoltaic blend. We also find that we can differentiate mixed phases from pure material phases in our data. The lateral resolution demonstrated is twice that previously reported from secondary electron imaging. Our results suggest that our energy-filtered scanning electron microscopy approach will be able to make major inroads into the understanding of complex, nano-structured organic materials.

Imaging the bulk nanoscale morphology of organic solar cell blends using helium ion microscopy.

We use helium ion microscopy (HeIM) to image the nanostructure of poly(3-hexylthiophene)/[6,6]-phenyl-C(61)-butric acid methyl ester (P3HT/PCBM) blend thin-films. Specifically, we study a blend thin-film subject to a thermal anneal at 140 °C and use a plasma-etching technique to gain access to the bulk of the blend thin-films. We observe a domain structure within the bulk of the film that is not apparent at the film-surface and tentatively identify a network of slightly elongated PCBM domains having a spatial periodicity of (20 ± 4) nm a length of (12 ± 8) nm.

Fluorene-based co-polymer with high hole mobility and device performance in bulk heterojunction organic solar cells.

A new donor-acceptor polymer based on 9,9-dioctylfluorene is synthesized and tested in organic photovoltaic devices. Results show that the polymer exhibits good solubility in a range of organic solvents and has a high hole mobility. When blended with a PC70 BM acceptor and fabricated into a bulk heterojunction, photovoltaic devices having a maximum power conversion efficiency (PCE) of 6.2% and a peak external quantum efficiency of 74% are created. Such efficiencies are realized without any necessity for solvent additives or thermal annealing protocols.