Andrew J. Sweetman

Towards a global historical emission inventory for selected PCB congeners - a mass balance approach: 3. An update

Previously published estimates of the global production, consumption and atmospheric emissions of 22 individual PCB congeners [Breivik K, Sweetman A, Pacyna JM, Jones KC. Towards a global historical emission inventory for selected PCB congeners - a mass balance approach. 1. Global production and consumption. Sci Total Environ 2002a; 290: 181-198.; Breivik K, Sweetman A, Pacyna JM, Jones KC. Towards a global historical emission inventory for selected PCB congeners--a mass balance approach. 2. Emissions. Sci Total Environ 2002b; 290: 181-198.] have provided useful information for later studies attempting to interpret contaminant levels in remote areas as well as in the global environment. As a result of the need for more contemporary emission data (following the year 2000), an update of this emission database is presented. This exercise takes into account new information on PCB production in Poland, as well as new data on the chemical composition of various technical mixtures for which less information had been available. The methodology to estimate temporal trends of PCB emissions associated with various types of PCB usage is improved. Projected emissions up to year 2100 are presented to facilitate predictions of future environmental exposure. The national emission data for each of the 114 countries considered is spatially resolved on a 1 degrees x1 degrees grid for each congener and year, using population density as a surrogate.

Towards a global historical emission inventory for selected PCB congeners--a mass balance approach. 1. Global production and consumption.

Information on the historical global production and consumption of polychlorinated biphenyls (PCBs) is urgently needed for estimating PCB fluxes to the environment and for interpreting global contamination patterns by these pollutants. This study presents the methodology, principal uncertainties and selected results from an inventory, aiming to quantify the global production and consumption of total PCBs as well as 22 PCB congeners. The available data on the historical production of PCBs and the chemical composition of various technical mixtures have been compiled from the literature. For some producers with less detailed information, the production of individual PCB constituents has been estimated to derive a global estimate for individual homologues and selected congeners. Information on imports, exports and consumption, as well as restrictions on production and imports, has further been compiled for individual countries. These data, along with assumptions on the trade between countries and regions, have been utilised to derive an estimate of the global historical consumption pattern. Although there are substantial uncertainties involved in these estimates, important aspects governing the large scale temporal and spatial patterns are most likely captured in these estimates. In particular, the information on imports and exports for the principal users of PCBs around the time of peak production is considered to be fairly reliable. The estimates account for a reported historical global production of approximately 1.3 million t PCBs, more than 70% of which are tri-, tetra- and pentachlorinated biphenyls. The results further suggest that almost 97% of the global historical use of PCBs have occurred in the Northern Hemisphere.

Understanding levels and trends of BDE-47 in the UK and North America : an assessment of principal reservoirs and source inputs.

Despite increasing interest in the occurrence of Polybrominated diphenyl ethers (PBDEs) in the environment, there has been only limited effort expended to identify principal source input reservoirs and pathways into the environment. Taking a single congener BDE-47, an important component of the penta commercial product, we have estimated principal contemporary reservoirs and emissions in two regions with very different historical use patterns. In North America, production and use of the penta-product has been rising steadily for the last 20 years, whilst in the UK, use has been restricted over the last 10 years, and most recently, there has been an EU ban on use. Mass balance models have been applied using our contemporary emission estimates to predict environmental levels. Results highlight that contemporary emissions to air can account for contemporary air concentrations but cannot account for measured concentrations in principal reservoirs such as soils and sediments. Future efforts are needed to improve our knowledge of the stocks of PBDEs in use, and emission factors from those stocks, to better understand/predict past and likely future trends.

Passive Air Sampling of Polycyclic Aromatic Hydrocarbons and Polychlorinated Naphthalenes across Europe

This study presents concurrently sampled ambient air data for a range of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated naphthalenes (PCNs) at the continental scale. This was achieved with a passive air sampling system, by deploying polyurethane foam disks, which were prepared in one laboratory, sealed to prevent contamination, sent out by courier to volunteers participating in different countries, exposed for six weeks, collected, resealed, and returned to the laboratory for analysis. The study area was Europe, a region with a history of extensive persistent organic pollutants usage and emission, and with marked national differences in population density, the degree of urbanization and industrial and agricultural development. Samplers were deployed at remote, rural, and urban locations in 22 countries. Calculated air concentrations were broadly in line with those obtained by conventional active air sampling techniques, for both compound classes and for compounds existing predominantly in the gas and particle phases. The geographical compound distribution reflected suspected regional emission patterns and highlighted localized source areas. Both PAH and PCN levels varied by more than two orders of magnitude. The implications for sources are discussed.

Assessment of organic contanhnant fate in waste water treatment plants I: Selected compounds and physicochemical properties

An extensive and comprehensive literature review has been conducted for compounds which we hypothesise could be present in sludge and maintain their integrity following application to agricultural land. The following compounds have been selected for review; chlorinated paraffins, quintozene, brominated diphenyl ethers, polychlorinated naphthalenes, polydimethylsiloxanes, chloronitrobenzenes, and a range of biologically active and pharmaceutical compounds. All have received interest as a result of their persistence and/or toxicity in environmental media. Physicochemical property information has also been compiled and/or calculated. In this way, an accompanying paper will attempt to predict compound fate in waste water treatment plants (WWTPs) and assess likely transfers from soil/plants to grazing livestock. These papers describe a first attempt to predict the fate of these classes of compounds in the environment and prioritise those of greatest concern.

Occurrence and risk assessment of organophosphorus and brominated flame retardants in the River Aire (UK)

This study presents the occurrence and risk of PBDEs, new brominated and organophosphorus flame retardants along a river affected by urban and industrial pressures (River Aire, UK). Tris(2-choroethyl) phosphate (TCEP), tris(2-chloro-1-methylethyl) phosphate (TCPP), tris[2-chloro-1-(chloromethyl)ethyl] phosphate (TDCP) and triphenyl phosphate (TPhP) were detected in all samples, with TCPP present at the highest concentrations, ranging from 113 to 26,050 ng L⁻¹. BDE-209 was detected in most of the sampled sites, ranging from 17 to 295 ng L⁻¹, while hexabromobenzene (HBB) and pentabromoethyl benzene (PBEB) were seldom detected. A risk quotients based on predicted no effect concentrations (PNEC) and flame retardants water concentration proved significant risk for adverse effects for algae, Daphnia and fish in sites close to industrial and urban sewage discharges. This study provides a protocol for the risk estimation of priority and new generation flame retardants based on river concentrations and toxicological values.

A congener-specific PCDD/F emissions inventory for the UK: do current estimates account for the measured atmospheric burden?

Considerable effort has been expended in the UK and elsewhere to quantify and rank PCDD/F primary sources and emissions to the environment, principally the atmosphere, so that cost-effective source reduction measures can be taken. Here, we predict a congener-specific emissions inventory for primary and secondary nondioxin-regulated sources to the UK atmosphere, estimated to have ranged from 3 to 22 kg in 1996. The inventory profile is dominated by OCDD (approximately 30-40%), 1,2,3,4,6,7,8-HpCDD (approximately 15-19%) and 1,2,3,4,6,7,8-HpCDF (approximately 14-19%). Congeners 2,3,4,7,8-PeCDF and 1,2,3,7,8-PeCDD dominate the sigmaTEQ composition. Mass balance modelling suggests that the predicted congener pattern in UK air (based on the emission inventory) is similar to observed measurements, with absolute concentrations being estimated within a factor of 2 for most congeners. Calculations taking into account atmospheric weathering processes and long range (advective) transport suggest that PCDD/F sources to ambient air are primarily ongoing and that atmospheric mixing will mask individual emission source profiles/identities. This supports measured evidence for the consistency of PCDD/F air profiles observed around the UK throughout the year.

Atmospheric polybrominated diphenyl ethers (PBDEs) in the United Kingdom

The occurrence of PBDEs has been studied in the atmosphere of four sites in the United Kingdom over a period of ten years. The concentrations have exhibited a sharp decrease after 2001-2003. This is evident in the urban sites of Manchester and London and at the semi-rural site of Hazelrigg. The average ΣPBDE half-lives for these three sites were 3.4, 2.0 and 3.5 years respectively. ΣPBDEs concentrations in the UK (in 2010 ΣPBDEs < 10 pg m(-3)) are among the lowest reported in literature. Comparison of concentrations to estimated emissions and employment of PBDE profiles suggest that PBDEs in the UK atmosphere originate from primary emissions from products that contain mainly the penta-BDE technical mixture. The detection of BDE-183 in the majority of samples hints that octa-bromodiphenylether has also been used extensively in the UK, however to a smaller extent than the penta- product.

PBDEs in Italian sewage sludge and environmental risk of using sewage sludge for land application.

Polybrominated diphenyl ethers (PBDEs) were determined in sewage sludge samples collected from eight Italian wastewater treatment plants (WWTPs) between June 2009 and March 2010. Total PBDE concentrations ranged from 158.3 to 9427 ng g(-1) dw, while deca-BDE (BDE-209) (concentrations ranging from 130.6 to 9411 ng g(-1) dw) dominated the congener profile in all the samples, contributing between 77% and 99.8% of total PBDE. The suitability of using a magnetic particle enzyme-linked immunoassay (ELISA) to analyse PBDEs in sewage sludge was also tested. The ELISA results, expressed as BDE-47 equivalents, were well correlated with those obtained by GC-NCI-MS, with correlation coefficients (r(2)) of 0.899 and 0.959, depending on the extraction procedure adopted. The risk assessment of PBDEs in sewage sludge addressed to land application was calculated. PEC(soil) values compared to the relative PNEC(soil) for penta and deca-BDE suggests that there is a low risk to the soil environment.

A generic model of human lifetime exposure to persistent organic contaminants: development and application to PCB-101.

We have developed a model which successfully reconstructs the lifetime polychlorinated biphenyl (PCB)-101 burden of the UK population for individuals born between 1920 and 1980. It not only follows burdens and clearance of persistent organic contaminants throughout a human lifetime--taking changes in age and body composition into account--but also, importantly, incorporates changing environmental concentrations of the compound of interest. Predicted results agree well with available measured lipid concentrations in human tissues. Its unique construction takes into account both changing environmental concentrations of PCBs in principal food groups and changing dietary habits during the time period. Because environmental burdens of persistent organic contaminants have changed over the last 60 years, residues in food will also have mirrored this change. Critically in this respect, the year in which an individual was born determines the shape and magnitude of their exposure profile for a given compound. Observed trends with age represent an historical legacy of exposure and are not simply a function of equal yearly cumulative inputs. We can demonstrate that the release profile of PCB-101 controls levels in the food supply and ultimately the burden of individuals throughout their life. This effect is expected to be similar for other PCB congeners and persistent organic compounds such as polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs). Models of this type have important applications as predictive tools to estimate the likely impact of source-reduction strategies on human tissue concentrations.