Andrew L. Hook

Combinatorial development of biomaterials for clonal growth of human pluripotent stem cells

Both human embryonic stem (hES) cells and induced pluripotent stem (hiPS) cells can self-renew indefinitely in culture, however current methods to clonally grow them are inefficient and poorly-defined for genetic manipulation and therapeutic purposes. Here we develop the first chemically-defined, xeno-free, feeder-free synthetic substrates to support robust self-renewal of fully-dissociated hES and hiPS cells. Materials properties including wettability, surface topography, surface chemistry and indentation elastic modulus of all polymeric substrates were quantified using high-throughput methods to develop structure/function relationships between materials properties and biological performance. These analyses show that optimal hES cell substrates are generated from monomers with high acrylate content, have a moderate wettability, and employ integrin αvβ3 and αvβ5 engagement with adsorbed vitronectin to promote colony formation. The structure/function methodology employed herein provides a general framework for the combinatorial development of synthetic substrates for stem cell culture.

High throughput methods applied in biomaterial development and discovery

The high throughput discovery of new bio materials can be achieved by rapidly screening many different materials synthesised by a combinatorial approach to identify the optimal composition that fulfils a particular biomedical application. Here we review the literature in this area and conclude that for polymers this process is best achieved in a microarray format, which enable thousands of cell-material interactions to be monitored on a single chip. Polymer microarrays can be formed by printing pre-synthesised polymers or by printing monomers onto the chip where on-slide polymerisation is initiated. The surface properties of the material can be analysed and correlated to the biological performance using high throughput surface analysis, including time-of-flight secondary ion mass spectrometry (ToF-SIMS), X-ray photoelectron spectroscopy (XPS) and water contact angle (WCA) measurements. This approach enables the surface properties responsible for the success of a material to be understood, which in turn provides the foundations of future material design. The high throughput discovery of materials using polymer microarrays has been explored for many cell-based applications including the isolation of specific cells from heterogeneous populations, the attachment and differentiation of stem cells and the controlled transfection of cells. Further development of polymerisation techniques and high throughput biological assays amenable to the polymer microarray format will broaden the combinatorial space and biological phenomenon that polymer microarrays can explore, and increase their efficacy. This will, in turn, facilitate the discovery of optimised polymeric materials for many biomaterial applications.

Patterned and switchable surfaces for biomolecular manipulation

The interactions of biomolecules and cells with solid interfaces play a pivotal role in a range of biomedical applications and have therefore been studied in great detail. An improved understanding of these interactions results in the ability to manipulate DNA, proteins and other biomolecules, as well as cells, spatially and temporally at surfaces with high precision. This in turn engenders the development of advanced devices, such as biosensors, bioelectronic components, smart biomaterials and microarrays. Spatial control can be achieved by the production of patterned surface chemistries using modern high-resolution patterning technologies based on lithography, microprinting or microfluidics, whilst temporal control is accessible through the application of switchable surface architectures. The combination of these two surface properties offers unprecedented control over the behaviour of biomolecules and cells at the solid-liquid interface. This review discusses the behaviour of biomolecules and cells at solid interfaces and highlights fundamental and applied research exploring patterned and switchable surfaces.

Polymer surface functionalities that control human embryoid body cell adhesion revealed by high throughput surface characterization of combinatorial material microarrays

High throughput materials discovery using combinatorial polymer microarrays to screen for new biomaterials with new and improved function is established as a powerful strategy. Here we combine this screening approach with high throughput surface characterization (HT-SC) to identify surface structure-function relationships. We explore how this combination can help to identify surface chemical moieties that control protein adsorption and subsequent cellular response. The adhesion of human embryoid body (hEB) cells to a large number (496) of different acrylate polymers synthesized in a microarray format is screened using a high throughput procedure. To determine the role of the polymer surface properties on hEB cell adhesion, detailed HT-SC of these acrylate polymers is carried out using time of flight secondary ion mass spectrometry (ToF SIMS), X-ray photoelectron spectroscopy (XPS), pico litre drop sessile water contact angle (WCA) measurement and atomic force microscopy (AFM). A structure-function relationship is identified between the ToF SIMS analysis of the surface chemistry after a fibronectin (Fn) pre-conditioning step and the cell adhesion to each spot using the multivariate analysis technique partial least squares (PLS) regression. Secondary ions indicative of the adsorbed Fn correlate with increased cell adhesion whereas glycol and other functionalities from the polymers are identified that reduce cell adhesion. Furthermore, a strong relationship between the ToF SIMS spectra of bare polymers and the cell adhesion to each spot is identified using PLS regression. This identifies a role for both the surface chemistry of the bare polymer and the pre-adsorbed Fn, as-represented in the ToF SIMS spectra, in controlling cellular adhesion. In contrast, no relationship is found between cell adhesion and wettability, surface roughness, elemental or functional surface composition. The correlation between ToF SIMS data of the surfaces and the cell adhesion demonstrates the ability to identify surface moieties that control protein adsorption and subsequent cell adhesion using ToF SIMS and multivariate analysis.

Advanced Substrate Fabrication for Cell Microarrays

The fabrication and characterization of chemical patterns using a technique that can be readily integrated with methods currently used for the formation of microarrays is presented. A high density poly(ethylene glycol) coating was deposited on glass slides as a background exhibiting low cell attachment properties. Phenylazide modified polymers were then printed on this background. UV irradiation of these polymer arrays resulted in the cross-linking of the polymer spots and their covalent attachment to the surface. Cell attachment was shown to follow the resultant surface chemistry pattern. Furthermore, the use of a robotic contact printer enabled the facile deposition of DNA microarrays on top of and aligned with the polymer microarrays. A transfected cell microarray was generated in this way, demonstrating not only the ability of this platform to limit cell attachment to specific regions, but the suitability for chip-based functional genomics, in particular, and high density cell assays in general.

Biomaterial modification of urinary catheters with antimicrobials to give long-term broadspectrum antibiofilm activity

Catheter-associated urinary tract infection (CAUTI) is the commonest hospital-acquired infection, accounting for over 100,000 hospital admissions within the USA annually. Biomaterials and processes intended to reduce the risk of bacterial colonization of the catheters for long-term users have not been successful, mainly because of the need for long duration of activity in flow conditions. Here we report the results of impregnation of urinary catheters with a combination of rifampicin, sparfloxacin and triclosan. In flow experiments, the antimicrobial catheters were able to prevent colonization by common uropathogens Proteus mirabilis, Staphylococcus aureus and Escherichia coli for 7 to 12weeks in vitro compared with 1-3days for other, commercially available antimicrobial catheters currently used clinically. Resistance development was minimized by careful choice of antimicrobial combinations. Drug release profiles and distribution in the polymer, and surface analysis were also carried out and the process had no deleterious effect on the mechanical performance of the catheter or its balloon. The antimicrobial catheter therefore offers for the first time a means of reducing infection and its complications in long-term urinary catheter users.

Creating gradients of two proteins by differential passive adsorption onto a PEG-density gradient

Many fundamental biological processes, including early embryo development, immune responses and the progression of pathogens, are mediated by gradients of biological molecules. Understanding these vital physiological processes requires the development of biomaterial platforms that can mimic them in-vitro. Such platforms include laboratory generated surface gradients of biological molecules. In this work, we report a method for the generation of surface gradients of two proteins. We used a surface grafting density gradient of polyethylene glycol (PEG) to control protein adsorption. In addition, we used protein size as a tool to control the position and the adsorbed amount of both proteins. To demonstrate our concept, we used fibrinogen as an example of a large protein and lysozyme as an example of a small protein. However, we speculate that the same strategy could be extended to any other pair of large and small proteins. We used X-ray photoelectron spectroscopy and sessile drop contact angle measurements to determine the chemical composition and wettability of the gradients. Protein adsorption was studied by surface plasmon resonance imaging.

Discovery of Novel Materials with Broad Resistance to Bacterial Attachment Using Combinatorial Polymer Microarrays

A new class of bacteria-attachment-resistant materials is discovered using a multi-generation polymer microarray methodology that reduces bacterial attachment by up to 99.3% compared with a leading commercially available silver hydrogel anti-bacterial material. The coverage of three bacterial species, Pseudomonas aeruginosa, Staphylococcus aureus, and uropathogenic Escherichia coli is assessed.

Discovery of a Novel Polymer for Human Pluripotent Stem Cell Expansion and Multilineage Differentiation

A scalable and cost‐effective synthetic polymer substrate that supports robust expansion and subsequent multilineage differentiation of human pluripotent stem cells (hPSCs) with defined commercial media is presented. This substrate can be applied to common cultureware and used off‐the‐shelf after long‐term storage. Expansion and differentiation of hPSCs are performed entirely on the polymeric surface, enabling the clinical potential of hPSC‐derived cells to be realized.

ToF-SIMS analysis of chemical heterogenities in inkjet micro-array printed drug/polymer formulations.

Three different formulations comprising two drugs, felodipine and hydrochlorothiazide (HCT) and two polymers, poly(vinyl pyrolidone) (PVP) and poly(lactic-co-glycolic acid) (PLGA) were inkjet printed as micro-dot arrays and analysed on an individual micro-spot basis by time-of-flight secondary ion mass spectrometry (ToF-SIMS). For the HCT/PLGA formulation, the spots showed heterogeneity of the drug and other chemical constituents. To further investigate these heterogeneities, multivariate curve resolution was applied to the ToF-SIMS hyperspectral image datasets. This approach successfully identified distinct chemical components elucidating the HCT, PLGA, substrate material, and contaminants based on sulphur, phosphorous and sodium chloride. Spots printed using either of the drugs with PVP exhibited full substrate coverage and a uniform distribution of the active ingredient along with all other constituents within the printed spot area. This represents the preferred situation in terms of stability and controlling the release of a drug from a polymer matrix.