Andrew N. Bartynski

A fullerene-based organic exciton blocking layer with high electron conductivity

We demonstrate the concentration dependence of C60 absorption in solid solutions of C60 and bathocuprione (BCP), revealing a nonlinear decrease of the C60 charge transfer (CT) state absorption. These blends are utilized to study the photocurrent contribution of the CT in bilayer organic photovoltaics (OPVs); 1:1 blends produce 40% less photocurrent. As exciton blocking electron transporting layers, the blends achieve power conversion efficiencies of 5.3%, an increase of 10% compared to conventional buffers.

Symmetry-breaking charge transfer in a zinc chlorodipyrrin acceptor for high open circuit voltage organic photovoltaics.

Low open-circuit voltages significantly limit the power conversion efficiency of organic photovoltaic devices. Typical strategies to enhance the open-circuit voltage involve tuning the HOMO and LUMO positions of the donor (D) and acceptor (A), respectively, to increase the interfacial energy gap or to tailor the donor or acceptor structure at the D/A interface. Here, we present an alternative approach to improve the open-circuit voltage through the use of a zinc chlorodipyrrin, ZCl [bis(dodecachloro-5-mesityldipyrrinato)zinc], as an acceptor, which undergoes symmetry-breaking charge transfer (CT) at the donor/acceptor interface. DBP/ZCl cells exhibit open-circuit voltages of 1.33 V compared to 0.88 V for analogous tetraphenyldibenzoperyflanthrene (DBP)/C60-based devices. Charge transfer state energies measured by Fourier-transform photocurrent spectroscopy and electroluminescence show that C60 forms a CT state of 1.45 ± 0.05 eV in a DBP/C60-based organic photovoltaic device, while ZCl as acceptor gives a CT state energy of 1.70 ± 0.05 eV in the corresponding device structure. In the ZCl device this results in an energetic loss between E(CT) and qV(OC) of 0.37 eV, substantially less than the 0.6 eV typically observed for organic systems and equal to the recombination losses seen in high-efficiency Si and GaAs devices. The substantial increase in open-circuit voltage and reduction in recombination losses for devices utilizing ZCl demonstrate the great promise of symmetry-breaking charge transfer in organic photovoltaic devices.

Solvent vapor annealing on perylene-based organic solar cells†

Diindenoperylene (DIP) and tetraphenyldibenzoperiflanthene (DBP) are two commonly used donor materials in organic solar cell devices. Despite their structural similarities, DIP films are crystalline, exhibiting good charge and exciton transport, whereas DBP films are amorphous and have lower carrier mobility and a short exciton diffusion length. However, DBP reveals a distinctly higher absorption due to the lying orientation of its transition dipole moments. In this paper, we investigate the influence of solvent vapor annealing (SVA) on the solar cell performance of both materials. In general, SVA induces a partial re-solubilization of the material leading to enhanced crystallinity of the treated layer. For DBP, extended annealing times result in a strong aggregation of the molecules, creating inhomogeneous layers unfavorable for solar cells. However, in DIP cells, SVA leads to an increase in fill factor (FF) and also a slight increase in short-circuit current density (JSC) due to interface roughening. The best results are obtained by combining solvent vapor annealed DIP layers with strongly absorbing DBP and C70 on top. Through this device architecture, we obtain the same increase in FF in addition to a higher gain in JSC, elevating the power conversion efficiency by a factor of 1.2 to more than 4%.

Efficient energy sensitization of C60 and application to organic photovoltaics.

Fullerenes are currently the most popular electron-acceptor material used in organic photovoltaics (OPVs) due to their superior properties, such as good electron conductivity and efficient charge separation at the donor/acceptor interface. However, low absorptivity in the visible spectral region is a significant drawback of fullerenes. In this study, we have designed a zinc chlorodipyrrin derivative (ZCl) that absorbs strongly in the visible region (450-600 nm) with an optical density 7-fold higher than a C60 film. ZCl efficiently transfers absorbed photoenergy to C60 in mixed films. Application of ZCl as an energy sensitizer in OPV devices leads to an increase in the photocurrent from the acceptor layer, without changing the other device characteristics, i.e., open circuit voltage and fill factor. For example, C60-based OPVs with and without the sensitizer give 4.03 and 3.05 mA/cm(2), respectively, while both have V(OC) = 0.88 V and FF = 0.44. Our ZCl sensitization approach improves the absorbance of the electron-acceptor layer while still utilizing the beneficial characteristics of C60 in OPVs.

Amorphous vs crystalline exciton blocking layers at the anode interface in planar and planar-mixed heterojunction organic solar cells

We compare the gain in power conversion efficiency (PCE) achieved by inserting either amorphous or crystalline exciton blocking layers at the anode interface for planar (PHJ) and planar-mixed heterojunction (PM-HJ) organic solar cells based on Tetraphenyldibenzoperiflanthene and fullerenes. For PHJ devices, there is a gain of more than 37% for both types of blocking layers, mainly due to an increase in photocurrent, indicating that this gain can be solely ascribed to the exciton blocking effect. A templating effect as proposed in literature for crystalline blocking layers cannot be affirmed. On the contrary, it is shown that there is a connection between the choice of acceptor (C60/C70) and the blocking effect on the anode side. Moreover, we can show that also for PM-HJ devices a remarkable efficiency enhancement is possible. The insertion of suitable blocking layers at the anode interface can alter the effective work function and thus the open-circuit voltage, leading to a maximum PCE of 5.8% in single j...

Power losses in bilayer inverted small molecule organic solar cells

Inverted bilayer organic solar cells using copper phthalocyanine (CuPc) as a donor and C60 as an acceptor with the structure: glass/indium tin oxide (ITO)/ZnO/C60/CuPc/MoO3/Al, in which the zinc oxide (ZnO) was deposited by atomic layer deposition, are compared with a conventional device: glass/ITO/CuPc/C60/bathocuproine/Al. These inverted and conventional devices give short circuit currents of 3.7 and 4.8 mA/cm2, respectively. However, the inverted device gives a reduced photoresponse from the CuPc donor compared to that of the conventional device. Optical field models show that the arrangement of organic layers in the inverted devices leads to lower absorption of long wavelengths by the CuPc donor; the low energy portion of the spectrum is concentrated near the metal oxide electrode in both devices.

Tandem and triple-junction polymer:nanocrystal hybrid solar cells consisting of identical subcells.

Tandem and triple-junction polymer:nanocrystal hybrid solar cells with identical subcells based on P3HT:CdSe nanocrystal bulk heterojunctions (BHJs) are reported for the first time showing 2-fold and 3-fold increases of open-circuit voltage (VOC), respectively, relative to the single-junction cell. A combination of nanocrystalline ZnO and pH-neutral PEDOT:PSS is used as the interconnecting layer, and the thicknesses of subcells are optimized with the guidance of optical simulations. As a result, the average power conversion efficiency (PCE) exhibits a significant increase from 2.0% (VOC = 0.57 V) in single-junction devices to 2.7% (champion 3.1%, VOC = 1.28 V) in tandem devices and 2.3% (VOC = 1.98 V) in triple-junction devices.

Multichromophoric energy sensitization of C60 for organic photovoltaics

In organic photovoltaics (OPVs), photocurrent generation is limited by absorption and exciton diffusion in the active layer. In this work, we describe the energy sensitization of C60 simultaneously by two chromophores at high volume concentrations (50%). This sensitization strategy takes advantage of the intense absorption of the sensitizers and the exceptional electron conduction and exciton diffusion length of C60 resulting in a 30% increase in photoresponse of the C60-based sensitized acceptor layer between λ = 450 nm and 670 nm and power conversion efficiency under simulated AM 1.5 G illumination. In (2,4-bis[4-(N,N-diphenylamino)-2,6-dihydroxyphenyl] squaraine)/C60 devices, sensitization results in an increase in JSC from 6.5 ± 0.2 mA/cm2 to 8.6 ± 0.2 mA/cm2 without compromising VOC or FF. These results demonstrate the robust nature of this sensitization scheme and its broad potential for application in OPVs.

Manipulating Triplet Yield through Control of Symmetry-Breaking Charge Transfer

The efficiency of an organic solar cell depends on the efficacy of exciton diffusion and dissociation processes, and this can be enhanced by reducing the exciton binding energy and increasing the exciton lifetime. Zinc chlorodipyrrin (ZCl) complexes exhibit reduced exciton binding energy due to ultrafast generation of intramolecular charge transfer (ICT) states via symmetry-breaking charge transfer in polar media. This Letter explores the fate of the ICT states using nanosecond transient absorption. In cyclohexane, ZCl undergoes intersystem crossing to produce triplets with ∼8 ns time constant (∼30% yield), and no ICT states are generated. However, in more polar solvents, triplets are generated within 1 ns via ICT state recombination with ∼3 times higher yield than produced via ISC. This high triplet yield in toluene (89%) and acetonitrile (76%) via ICT state recombination is a beneficial pathway to spin-protect the excited-state decay for additional charge generation from triplet excited states.