Andrew P. Ault

Bringing the ocean into the laboratory to probe the chemical complexity of sea spray aerosol

The production, size, and chemical composition of sea spray aerosol (SSA) particles strongly depend on seawater chemistry, which is controlled by physical, chemical, and biological processes. Despite decades of studies in marine environments, a direct relationship has yet to be established between ocean biology and the physicochemical properties of SSA. The ability to establish such relationships is hindered by the fact that SSA measurements are typically dominated by overwhelming background aerosol concentrations even in remote marine environments. Herein, we describe a newly developed approach for reproducing the chemical complexity of SSA in a laboratory setting, comprising a unique ocean-atmosphere facility equipped with actual breaking waves. A mesocosm experiment was performed in natural seawater, using controlled phytoplankton and heterotrophic bacteria concentrations, which showed SSA size and chemical mixing state are acutely sensitive to the aerosol production mechanism, as well as to the type of biological species present. The largest reduction in the hygroscopicity of SSA occurred as heterotrophic bacteria concentrations increased, whereas phytoplankton and chlorophyll-a concentrations decreased, directly corresponding to a change in mixing state in the smallest (60–180 nm) size range. Using this newly developed approach to generate realistic SSA, systematic studies can now be performed to advance our fundamental understanding of the impact of ocean biology on SSA chemical mixing state, heterogeneous reactivity, and the resulting climate-relevant properties.

Size-Dependent Changes in Sea Spray Aerosol Composition and Properties with Different Seawater Conditions

A great deal of uncertainty exists regarding the chemical diversity of particles in sea spray aerosol (SSA), as well as the degree of mixing between inorganic and organic species in individual SSA particles. Therefore, in this study, single particle analysis was performed on SSA particles, integrating transmission electron microscopy with energy dispersive X-ray analysis and scanning transmission X-ray microscopy with near edge X-ray absorption fine structure spectroscopy, with a focus on quantifying the relative fractions of different particle types from 30 nm to 1 μm. SSA particles were produced from seawater in a unique ocean-atmosphere facility equipped with breaking waves. Changes to the SSA composition and properties after the addition of biological (bacteria and phytoplankton) and organic material (ZoBell growth media) were probed. Submicrometer SSA particles could be separated into two distinct populations: one with a characteristic sea salt core composed primarily of NaCl and an organic carbon and Mg(2+) coating (SS-OC), and a second type consisting of organic carbon (OC) species which are more homogeneously mixed with cations and anions, but not chloride. SS-OC particles exhibit a wide range of sizes, compositions, morphologies, and distributions of elements within each particle. After addition of biological and organic material to the seawater, a change occurs in particle morphology and crystallization behavior associated with increasing organic content for SS-OC particles. The fraction of OC-type particles, which are mainly present below 180 nm, becomes dramatically enhanced with increased biological activity. These changes with size and seawater composition have important implications for atmospheric processes such as cloud droplet activation and heterogeneous reactivity.

Sea spray aerosol as a unique source of ice nucleating particles

Ice nucleating particles (INPs) are vital for ice initiation in, and precipitation from, mixed-phase clouds. A source of INPs from oceans within sea spray aerosol (SSA) emissions has been suggested in previous studies but remained unconfirmed. Here, we show that INPs are emitted using real wave breaking in a laboratory flume to produce SSA. The number concentrations of INPs from laboratory-generated SSA, when normalized to typical total aerosol number concentrations in the marine boundary layer, agree well with measurements from diverse regions over the oceans. Data in the present study are also in accord with previously published INP measurements made over remote ocean regions. INP number concentrations active within liquid water droplets increase exponentially in number with a decrease in temperature below 0 °C, averaging an order of magnitude increase per 5 °C interval. The plausibility of a strong increase in SSA INP emissions in association with phytoplankton blooms is also shown in laboratory simulations. Nevertheless, INP number concentrations, or active site densities approximated using “dry” geometric SSA surface areas, are a few orders of magnitude lower than corresponding concentrations or site densities in the surface boundary layer over continental regions. These findings have important implications for cloud radiative forcing and precipitation within low-level and midlevel marine clouds unaffected by continental INP sources, such as may occur over the Southern Ocean.

Measurements of Isoprene-Derived Organosulfates in Ambient Aerosols by Aerosol Time-of-Flight Mass Spectrometry - Part 1: Single Particle Atmospheric Observations in Atlanta

Organosulfate species have recently been identified as a potentially significant class of secondary organic aerosol (SOA) species, yet little is known about their behavior in the atmosphere. In this work, organosulfates were observed in individual ambient aerosols using single particle mass spectrometry in Atlanta, GA during the 2002 Aerosol Nucleation and Characterization Experiment (ANARChE) and the 2008 August Mini-Intensive Gas and Aerosol Study (AMIGAS). Organosulfates derived from biogenically produced isoprene were detected as deprotonated molecular ions in negative-ion spectra measured by aerosol time-of-flight mass spectrometry; comparison to high-resolution mass spectrometry data obtained from filter samples corroborated the peak assignments. The size-resolved chemical composition measurements revealed that organosulfate species were mostly detected in submicrometer aerosols and across a range of aerosols from different sources, consistent with secondary reaction products. Detection of organosulfates in a large fraction of negative-ion ambient spectra - ca. 90-95% during ANARChE and ~65% of submicrometer particles in AMIGAS - highlights the ubiquity of organosulfate species in the ambient aerosols of biogenically influenced urban environments.

Characterization of the Single Particle Mixing State of Individual Ship Plume Events Measured at the Port of Los Angeles

Ship emissions contribute significantly to gaseous and particulate pollution worldwide. To better understand the impact of ship emissions on air quality, measurements of the size-resolved chemistry of individual particles in ship emissions were made at the Port of Los Angeles using real-time, single-particle mass spectrometry. Ship plumes were identified through a combination of ship position information and measurements of gases and aerosol particles at a site 500 m from the center of the main shipping channel at the Port of Los Angeles. Single particles containing mixtures of organic carbon, vanadium, and sulfate (OC-V-sulfate) resulted from residual fuel combustion (i.e., bunker fuel), whereas high quantities of fresh soot particles (when OC-V-sulfate particles were not present) represented distinct markers for plumes from distillate fuel combustion (i.e., diesel fuel) from ships as well as trucks in the port area. DC-V-sulfate particles from residual fuel combustion contained significantly higher levels of sulfate and sulfuric acid than plume particles containing no vanadium. These associations may be due to vanadium (or other metals such as iron) in the fuel catalyzing the oxidation of S0(2) to produce sulfate and sulfuric acid on these particles. Enhanced sulfate production on OC-V-sulfate ship emission particles would help explain some of the higher than expected sulfate levels measured in California compared to models based on emissions inventories and typical sulfate production pathways. Understanding the overall impact of ships emissions is critical for controlling regional air quality in the many populated coastal regions of the world.

Inside versus Outside: Ion Redistribution in Nitric Acid Reacted Sea Spray Aerosol Particles as Determined by Single Particle Analysis

Single particle analysis of individual sea spray aerosol particles shows that cations (Na(+), K(+), Mg(2+), and Ca(2+)) within individual particles undergo a spatial redistribution after heterogeneous reaction with nitric acid, along with the development of a more concentrated layer of organic matter at the surface of the particle. These data suggest that specific ion and aerosol pH effects play an important role in aerosol particle structure in ways that have not been previously recognized.

Single-particle SEM-EDX analysis of iron-containing coarse particulate matter in an urban environment: sources and distribution of iron within Cleveland, Ohio.

The physicochemical properties of coarse-mode, iron-containing particles and their temporal and spatial distributions are poorly understood. Single-particle analysis combining X-ray elemental mapping and computer-controlled scanning electron microscopy (CCSEM-EDX) of passively collected particles was used to investigate the physicochemical properties of iron-containing particles in Cleveland, OH, in summer 2008 (Aug-Sept), summer 2009 (July-Aug), and winter 2010 (Feb-March). The most abundant classes of iron-containing particles were iron oxide fly ash, mineral dust, NaCl-containing agglomerates (likely from road salt), and Ca-S containing agglomerates (likely from slag, a byproduct of steel production, or gypsum in road salt). The mass concentrations of anthropogenic fly ash particles were highest in the Flats region (downtown) and decreased with distance away from this region. The concentrations of fly ash in the Flats region were consistent with interannual changes in steel production. These particles were observed to be highly spherical in the Flats region, but less so after transport away from downtown. This change in morphology may be attributed to atmospheric processing. Overall, this work demonstrates that the method of passive collection with single-particle analysis by electron microscopy is a powerful tool to study spatial and temporal gradients in components of coarse particles. These gradients may correlate with human health effects associated with exposure to coarse-mode particulate matter.

Measurements of isoprene-derived organosulfates in ambient aerosols by aerosol time-of-flight mass spectrometry - Part 2: Temporal variability and formation mechanisms

Organosulfate species have recently gained attention for their potentially significant contribution to secondary organic aerosol (SOA); however, their temporal behavior in the ambient atmosphere has not been probed in detail. In this work, organosulfates derived from isoprene were observed in single particle mass spectra in Atlanta, GA during the 2002 Aerosol Nucleation and Characterization Experiment (ANARChE) and the 2008 August Mini-Intensive Gas and Aerosol Study (AMIGAS). Real-time measurements revealed that the highest organosulfate concentrations occurred at night under a stable boundary layer, suggesting gas-to-particle partitioning and subsequent aqueous-phase processing of the organic precursors played key roles in their formation. Further analysis of the diurnal profile suggests possible contributions from multiple production mechanisms, including acid-catalysis and radical-initiation. This work highlights the potential for additional SOA formation pathways in biogenically influenced urban regions to enhance the organic aerosol burden.

Raman microspectroscopy and vibrational sum frequency generation spectroscopy as probes of the bulk and surface compositions of size-resolved sea spray aerosol particles

Sea spray aerosol (SSA) represents one of the largest aerosol components in our atmosphere. SSA plays a major role in influencing climate; however the overall impacts remain poorly understood due to the overall chemical complexity. SSA is comprised of a mixture of inorganic and organic components in varying proportions that change as a function of particle size and seawater composition. In this study, nascent SSA particles were produced using breaking waves, resulting in compositions and sizes representative of the open ocean. The composition of individual SSA particles ranging in size from ca. 0.15 to 10 μm is measured using Raman microspectroscopy, while the interfacial composition of collections of size-resolved particles is probed by sum frequency generation (SFG). Raman spectra of single particles have bands in the 980 to 1030 cm(-1) region associated with the symmetric stretch of the sulfate anion, the 2800 to 3000 cm(-1) region associated with carbon-hydrogen stretches, and from 3200-3700 cm(-1) associated with the oxygen-hydrogen stretches of water. The relative intensities of these features showed a strong dependence on particle size. In particular, submicrometer particles exhibited a larger amount of organic matter compared to supermicrometer particles. However, for external surfaces of homogeneous SSA particles (i.e. particles without a solid inclusion), and also the interfaces of mixed-phase particles, there was a strong SFG response in the aliphatic C-H stretching region for both sub- and supermicrometer particles. This finding suggests that organic material present in supermicrometer particles primarily resides at the interface. The presence of methylene contributions in the SFG spectra indicated disordered alkyl chains, in contrast to what one might expect for a surfactant layer on a sea salt particle. Changes in peak frequencies and relative intensities in the C-H stretching region are seen for some particles after the addition of bacteria, phytoplankton, and growth medium to the seawater. This study provides new insights into the bulk and surface composition of SSA particles and represents a step forward in our understanding of this globally abundant aerosol. It also provides insights into the development of model systems for SSA that may more accurately represent the organic layer at the surface.

Measurements of Aerosol Chemistry during New Particle Formation Events at a Remote Rural Mountain Site

Determining the major sources of particles that act as cloud condensation nuclei (CCN) represents a critical step in the development of a more fundamental understanding of aerosol impacts on cloud formation and climate. Reported herein are direct measurements of the CCN activity of newly formed ambient particles, measured at a remote rural site in the Sierra Nevada Mountains of Northern California. Nucleation events in the winter of 2009 occurred during two pristine periods following precipitation, with higher gas-phase SO(2) concentrations during the second period, when faster particle growth occurred (7-8 nm/h). Amines, as opposed to ammonia, and sulfate were detected in the particle phase throughout new particle formation (NPF) events, increasing in number as the particles grew to larger sizes. Interestingly, long-range transport of SO(2) from Asia appeared to potentially play a role in NPF during faster particle growth. Understanding the propensity of newly formed particles to act as CCN is critical for predicting the effects of NPF on orographic cloud formation during winter storms along the Sierra Nevada Mountain range. The potential impact of newly formed particles in remote regions needs to be compared with that of transported urban aerosols when evaluating the impact of aerosols on clouds and climate.