Andrew P. Hurt

Bioactivity and biocompatibility of a chitosan-tobermorite composite membrane for guided tissue regeneration

A polymer-mineral composite membrane of the mucopolysaccharide derivative, chitosan, and calcium silicate hydrate phase, tobermorite, was prepared by solvent casting and characterised by scanning electron microscopy (SEM) and Fourier Transform infrared spectroscopy (FTIR). The bioactivity and biocompatibility of the chitosan-tobermorite composite were evaluated in vitro with respect to its potential for use as a biodegradable guided tissue regeneration (GTR) membrane. The in vitro bioactivity of the composite was confirmed by the formation of crystalline substituted hydroxyapatite on the surface of the embedded tobermorite particles in simulated body fluid. The presence of the composite membrane was found to enhance the growth of MG63 human osteosarcoma cells by up to 30%. The findings of this initial study have indicated that this novel chitosan-tobermorite composite may be a suitable material for GTR applications.

Bioactivity, biocompatibility and antimicrobial properties of a chitosan-mineral composite for periodontal tissue regeneration

A composite membrane of the polymer, chitosan, and the silver-exchanged mineral phase, tobermorite, was prepared by solvent casting and characterised by scanning electron microscopy and Fourier transform infrared spectroscopy. The in vitro bioactivity, cytocompatibility and antimicrobial activity of the composite were evaluated with respect to its potential application as a guided tissue regeneration (GTR) membrane. The in vitro bioactivity was verified by the formation of hydroxyapatite on the surface of the membrane in simulated body fluid and its cytocompatibility was established using MG63 human osteosarcoma cells. The presence of silver ions conferred significant antimicrobial activity against S. aureus, P. aeruginosa and E. coli. The findings of this investigation have indicated that the chitosan-silver-tobermorite composite is a prospective candidate for GTR applications.

Component Release and Mechanical Properties of Endodontic Sealers following Incorporation of Antimicrobial Agents

Root canal sealers with antimicrobial activity are highly beneficial; therefore, their antimicrobial properties could be improved by incorporation of antimicrobial agents. In the present study, the release of the quaternary ammonium compounds from endodontic sealers admixed with either benzalkonium chloride (BC) or cetylpyridinium chloride (CPC) at loadings of 2% wt was monitored. The effect of these additives on the compressive strengths and their release from the sealers was determined after 1 and 4 weeks. All of the materials studied were found to be capable of releasing antimicrobial additive in useful quantities. The release of CPC occurred to a statistically significant greater extent than BC for all materials. The addition of both BC and CPC generally decreased the compressive strength of all the endodontic sealers, with the exception of CPC in AH Plus, where the compressive strength was significantly increased. This suggests that, for these endodontic sealers, the antimicrobial additives alter the setting chemistry. AH Plus is an epoxy-based material cured with an amine, and in this case the increase in compressive strength with CPC is attributed to an enhanced cure reaction with this system. In all other cases, the additive inhibited the cure reaction to a greater or lesser extent.

Characterisation and microleakage of a new hydrophilic fissure sealant - UltraSeal XT® hydro™

ABSTRACT Objectives The aim of this study was to characterise the new hydrophilic fissure sealant, UltraSeal XT® hydro™ (Ultradent Products, USA), and to investigate its in vitro resistance to microleakage after placement on conventionally acid etched and sequentially lased and acid etched molars. Material and Methods The sealant was characterised by Fourier transform infra-red spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), and Vickers indentation test. Occlusal surfaces of extracted human molars were either conventionally acid etched (n=10), or sequentially acid etched and laser irradiated (n=10). UltraSeal XT® hydro™ was applied to both groups of teeth which were then subjected to 2,500 thermocycles between 5 and 55°C prior to microleakage assessment by fuchsin dye penetration. Results UltraSeal XT® hydro™ is an acrylate-based sealant that achieved a degree of conversion of 50.6±2.2% and a Vickers microhardness of 24.2±1.5 under standard light curing (1,000 mWcm-2 for 20 s). Fluoride ion release is negligible within a 14-day period. SEM and EDX analyses indicated that the sealant comprises irregular submicron and nano-sized silicon-, barium-, and aluminium-bearing filler phases embedded in a ductile matrix. Laser preconditioning was found to significantly reduce microleakage (Mann-Whitney U test, p<0.001). The lased teeth presented enhanced surface roughness on a 50 to 100 μm scale that caused the segregation and concentration of the filler particles at the enamel-sealant interface. Conclusion Laser preconditioning significantly decreased microleakage and increased enamel surface roughness, which caused zoning of the filler particles at the enamel-sealant interface.

Synthesis of mesoporous triple-metal nanosorbent from layered double hydroxide as an efficient new sorbent for removal of dye from water and wastewater

In this study, co-precipitation synthesis of the mesoporous triple-metal nanosorbent from Fe, Cu, Ni layered double hydroxide (FeCuNi-LDH), on the basis of the data obtained from the TG analysis was carried out. The FTIR spectroscopy and XRD results confirm the formation of CuO, NiO and Fe2O3 nanoparticles, while the EDX analysis does not show significant variations on the surface in elemental composition. BET analysis shows that FeCuNi-280 (FeCuNi-LDH calcinated at 280 °C) with mesoporous structure, has larger surface area compared to FeCuNi-LDH and FeCuNi-550 (FeCuNi-LDH calcinated at 550 °C). The value of pHPZC of FeCuNi-280 is found to be 8.66. Obtained FeCuNi-280 material showed the ability for efficient removal of dye Reactive Blue 19 (RB19) from water, with a very high sorption capacity of 480.79 mg/g at optimal conditions: the sorbent dose of 0.6 g/dm3, stirring speed of 280 rpm and pH 2. The kinetics results of the sorption process were well fitted by pseudo-second order and Chrastil model, and the sorption isotherm was well described by Sips, Langmuir and Brouers-Sotolongo model. FeCuNi-280 was easily regenerated with aqueous solution of NaOH, and reutilization was successfully done in five sorption cycles. The present study show that easy-to-prepare, relatively inexpensive nanosorbent FeCuNi-280 is among the best sorbents for the removal of RB19 dye from water solution and wastewater from textile industry in wide range of pH.

Release of cetyl pyridinium chloride from fatty acid chelate temporary dental cement

Abstract Objective To determine whether the antimicrobial nature of a fatty acid chelate temporary dental cement can be enhanced by the addition of 5% cetyl pyridinium chloride (CPC). Materials and methods The temporary cement, Cavex Temporary was employed, and additions of CPC were made to either the base or the catalyst paste prior to mixing the cement. Release of CPC from set cement specimens was followed using reverse-phase HPLC for a period of up to 2 weeks following specimen preparation. Potential interactions between Cavex and CPC were examined by Fourier transform infrared spectroscopy (FTIR) and antimicrobial effects were determined using zone of inhibition measurements after 24 h with disc-shaped specimens in cultured Streptococcus mutans. Results FTIR showed no interaction between CPC and the components of the cement. CPC release was found to follow a diffusion mechanism for the first 6 h or so, and to equilibrate after approximately 2 weeks, with no significant differences between release profiles when the additive was incorporated into the base or the catalyst paste. Diffusion was rapid, and had a diffusion coefficient of approximately 1 × 10−9 m2 s−1 in both cases. Total release was in the range 10–12% of the CPC loading. Zones of inhibition around discs containing CPC were significantly larger than those around the control discs of CPC-free cement. Conclusions The antimicrobial character of this temporary cement can be enhanced by the addition of CPC. Such enhancement is of potential clinical value, though further in vivo work is needed to confirm this.

Release of antimicrobial compounds from a zinc oxide-chelate cement

This study examined the release of cetylpyridinium chloride and benzalkonium chloride from fatty acid chelate temporary dental cement and their antimicrobial effects. The cement was Cavex Temporary, and either cetylpyridinium chloride or benzalkonium chloride was added (1% or 5% by mass), incorporating into the base paste. Release of the additives was determined by reverse-phase high-performance liquid chromatography. Possible chemical interactions between the cement components and additives were examined by Fourier transform infrared (FTIR) spectroscopy. Antimicrobial effects were assessed by measuring the zone of inhibition around sample discs after 24 h in a Streptococcus mutans culture. FTIR spectroscopy showed no interaction with cement components. For both additives, release was by diffusion for approximately the first 6 hours, with equilibration after about 2 weeks. Diffusion coefficients were 1.76 m2 s½ to 8.05 × 10-12 m2 s½ and total release was 10.3 to 44.7% of additive loading. Zones of inhibition with additive were significantly larger than those for control discs. In conclusion, the antimicrobial properties of Cavex temporary cement are improved by the addition of the antimicrobial compounds cetylpyridium chloride and benzalkonium chloride, which are released by a diffusion process.

Antibacterial activity of a chitosan-PVA-Ag+-Tobermorite composite for periodontal repair

A polymer-mineral composite was prepared by solvent casting a mixture of chitosan, poly(vinyl alcohol), and Ag+-exchanged tobermorite in dilute acetic acid and characterised by scanning electron microscopy and Fourier transform infrared spectroscopy. The in vitro bioactivity of the CPTAg membrane was confirmed by the formation of hydroxyapatite on its surface in simulated body fluid. The alkaline dissolution products of the tobermorite lattice buffered the acidic breakdown products of the chitosan polymer and the presence of silver ions resulted in marked antimicrobial action against S. aureus, P. aeruginosa, and E. coli. The in vitro cytocompatibility of the CPTAg membrane was confirmed using MG63 osteosarcoma cells. The findings of this preliminary study have indicated that chitosan-poly(vinyl alcohol)-Ag+-tobermorite composites may be suitable materials for guided tissue regeneration applications.