Andrzej A. Kasprzak

The mitotic kinesin-14 Ncd drives directional microtubule–microtubule sliding

During mitosis and meiosis, the bipolar spindle facilitates chromosome segregation through microtubule sliding as well as microtubule growth and shrinkage. Kinesin-14, one of the motors involved, causes spindle collapse in the absence of kinesin-5 (Refs 2, 3), participates in spindle assembly and modulates spindle length. However, the molecular mechanisms underlying these activities are not known. Here, we report that Drosophila melanogaster kinesin-14 (Ncd) alone causes sliding of anti-parallel microtubules but locks together (that is, statically crosslinks) those that are parallel. Using single molecule imaging we show that Ncd diffuses along microtubules in a tail-dependent manner and switches its orientation between sliding microtubules. Our results show that kinesin-14 causes sliding and expansion of an anti-parallel microtubule array by dynamic interactions through the motor domain on the one side and the tail domain on the other. This mechanism accounts for the roles of kinesin-14 in spindle organization.

Functional effects of congenital myopathy-related mutations in gamma-tropomyosin gene.

Missense mutations in human TPM3 gene encoding γ-tropomyosin expressed in slow muscle type 1 fibers, were associated with three types of congenital myopathies-nemaline myopathy, cap disease and congenital fiber type disproportion. Functional effects of the following substitutions: Leu100Met, Ala156Thr, Arg168His, Arg168Cys, Arg168Gly, Lys169Glu, and Arg245Gly, were examined in biochemical assays using recombinant tropomyosin mutants and native proteins isolated from skeletal muscle. Most, but not all, mutations decreased the affinity of tropomyosin for actin alone and in complex with troponin (±Ca(2+)). All studied tropomyosin mutants reduced Ca-induced activation but had no effect on the inhibition of actomyosin cross-bridges. Ca(2+)-sensitivity of the actomyosin interactions, as well as cooperativity of myosin-induced activation of the thin filament was affected by individual tropomyosin mutants with various degrees. Decreased motility of the reconstructed thin filaments was a result of combined functional defects caused by myopathy-related tropomyosin mutants. We conclude that muscle weakness and structural abnormalities observed in TPM3-related congenital myopathies result from reduced capability of the thin filament to fully activate actin-myosin cross-bridges.

Interactions between Subunits in Heterodimeric Ncd Molecules

The nonprocessive minus-end-directed kinesin-14 Ncd is involved in the organization of the microtubule (MT) network during mitosis. Only one of the two motor domains is involved in the interaction with the MT. The other head is tethered to the bound one. Here we prepared, purified, and characterized mutated Ncd molecules carrying point mutations in one of the heads, thus producing heterodimeric motors. The mutations tested included substitutions in Switch I and II: R552A, E585A, and E585D; the decoupling mutant N600K; and a deletion in the motor domain in one of the subunits resulting in a single-headed molecule (NcN). These proteins were isolated by two sequential affinity chromatography steps, followed by measurements of their affinities to MT, enzymatic properties, and the velocity of the microtubule gliding test in vitro. A striking observation is a low affinity of the single-headed NcN for MT both without nucleotides and in the presence of 5′-adenylyl-β,γ-imidodiphosphate, implying that the tethered head has a profound effect on the structure of the Ncd-MT complex. Mutated homodimers had no MT-activated ATPase and no motility, whereas NcN had motility comparable with that of the wild type Ncd. Although the heterodimers had one fully active and one inactive head, the ATPase and motility of Ncd heterodimers varied dramatically, clearly demonstrating that interactions between motor domains exist in Ncd. We also show that the bulk property of dimeric proteins that interact with the filament with only one of its heads depends also on the distribution of the filament-interacting subunits.

Ca2+ binding to myosin regulatory light chain affects the conformation of the N-terminus of essential light chain and its binding to actin

We prepared a new type of skeletal myosin subfragment 1 (S1-MLC1F) containing both, the essential and the regulatory light chains, intact, by exchanging the essential light chains of papain S1 with bacterially expressed longer isoform (MLC1F) of this light chain. We then compared the enzymatic and structural properties of chymotryptic S1, papain S1, and S1-MLC1F in the presence and in the absence of Ca(2+) ions bound to the regulatory light chain. In the presence of Ca(2+), subfragment 1 containing both intact light chains exhibited lower V(max) and lower K(m) for actin activation of S1 ATPase. When S1-MLC1F was cross-linked to actin via the N-terminus of the essential light chain, the yield was much higher when Ca(2+) ions saturated the regulatory light chain. Limited proteolysis of the essential light chain in S1-MLC1F was significantly inhibited in the presence of calcium as compared to chymotryptic S1. We conclude that the effect of binding of Ca(2+) to the regulatory light chain is transmitted to the N-terminal extension of the longer isoform of the essential light chain. The resulting structure of the N-terminus is less susceptible to proteolytic digestion, binds tighter to actin, and has an inhibitory effect on actin-activated myosin ATPase. This new conformation of the N-terminus may be responsible for calcium induced myosin-linked modulation of striated muscle contraction.

The Mechanism of Calcium-Induced Inhibition of Muscle Fructose 1,6-bisphosphatase and Destabilization of Glyconeogenic Complex

The mechanism by which calcium inhibits the activity of muscle fructose 1,6-bisphosphatase (FBPase) and destabilizes its interaction with aldolase, regulating glycogen synthesis from non-carbohydrates in skeletal muscle is poorly understood. In the current paper, we demonstrate evidence that Ca2+ affects conformation of the catalytic loop 52–72 of muscle FBPase and inhibits its activity by competing with activatory divalent cations, e.g. Mg2+ and Zn2+. We also propose the molecular mechanism of Ca2+-induced destabilization of the aldolase–FBPase interaction, showing that aldolase associates with FBPase in its active form, i.e. with loop 52–72 in the engaged conformation, while Ca2+ stabilizes the disengaged-like form of the loop.

The C-terminus of kinesin-14 Ncd is a crucial component of the force generating mechanism

Ncd, a member of kinesin‐14 family motors, uses the power stroke, a lever‐like pivoting action of a long and stiff element, to exert force and generate movement. To better understand the role of the Ncd C‐terminus in this process we produced four Ncd mutants in which this segment was altered or deleted. For these proteins we measured their affinity to the microtubule, steady‐state ATPase and gliding velocity in multiple motor assays. The mutations had a dramatic effect on all three parameters measured, suggesting that the C‐terminal residues of Ncd play an important role in modulating the interaction of the motor with the microtubule.

Prion protein impairs kinesin-driven transport

Our previous studies have demonstrated that prion protein (PrP) leads to disassembly of microtubular cytoskeleton through binding to tubulin and its oligomerization. Here we found that PrP-treated cells exhibited improper morphology of mitotic spindles. Formation of aberrant spindles may result not only from altered microtubule dynamics - as expected from PrP-induced tubulin oligomerization - but also from impairing the function of molecular motors. Therefore we checked whether binding of PrP to microtubules affected movement generated by Ncd - a kinesin responsible for the proper organization of division spindles. We found that PrP inhibited Ncd-driven transport of microtubules. Most probably, the inhibition of the microtubule movement resulted from PrP-induced changes in the microtubule structure since Ncd-microtubule binding was reduced already at low PrP to tubulin molar ratios. This study suggests another plausible mechanism of PrP cytotoxicity related to the interaction with tubulin, namely impeding microtubule-dependent transport.

The Use of FRET in the Analysis of Motor Protein Structure

Fluorescence resonance energy transfer (FRET) is a spectroscopic phenomenon that consists of long-range dipole-dipole interaction between two chromophores. This method can be employed to gain quantitative distance information on macromolecules. FRET is particularly useful to characterize structural states of motor proteins, because the spatial relationship between various mechanical elements of the motor undergoing its mechanical cycle is essential to understand how force and movement are generated. In this chapter, we describe the technique, including the equations, methods of introducing fluorescence probes in specific loci of the protein, and data analysis. Practical guidelines and hints are also provided for protein preparation, labeling, and measuring FRET efficiency. The protocol is presented for interhead distance measurements in the dimeric kinesin-like motor, Ncd. However, it can easily be adapted to many other motor proteins.

Insights into the process of EB1-dependent tip-tracking of kinesin-14 Ncd. The role of the microtubule

End-binding proteins are capable of tracking the plus-ends of growing microtubules (MTs). The motor protein Ncd, a member of the kinesin-14 family, interacts with EB1 protein and becomes a non-autonomous tip-tracker. Here, we attempted to find out whether at least for Ncd, the efficient EB1-mediated tip-tracking involves the interaction of the kinesin with the MT surface. We prepared a series of Ncd tail mutants in which the MT-binding sites were altered or eliminated. Using TIRF microscopy, we characterized their behavior as tip-trackers and measured the dwell times of single molecules of EB1 and Ncd tail or its mutated forms. The mutated forms of Ncd tail exhibited tip-tracking in the presence of EB1 and the effectiveness of this process was proportional to the affinity of the mutants tail to MT. Even though the interaction of Ncd with EB1 was weak (Kd∼9μM) the half saturating concentration of EB1 for tip-tracking was 7nM. The dwell time of Ncd tail in the presence of EB1 was ∼1s. The dwell time of EB1 alone was shorter (∼0.3s) and increased considerably in the presence of a large excess of Ncd tail. We demonstrated that tip-tracking of kinesin-14 occurs through several concurrent mechanisms: binding of kinesin only to EB1 located at the MT end, interaction of the kinesin molecules with a composite site formed by EB1 and the MT tip, and probably surface diffusion of the tail along MT. The second mechanism seems to play a crucial role in efficient tip-tracking.

Working stroke of the kinesin-14, ncd, comprises two substeps of different direction

Significance Kinesin, dynein, and myosin motor proteins are best known for their production of linear force along the axes of cytoskeletal filaments. However, many of these motors can also generate torque manifesting itself by filament rotations around their longitudinal axes when gliding on motor-coated surfaces. By combining the measured longitudinal and angular velocities of microtubules gliding on nonprocessive kinesin-14 motors with a theoretical model we here show that the working stroke of this motor comprises at least two distinct conformational changes. Our observations clarify the temporal order of events in the hydrolysis cycle of kinesin-14, which has not been conclusive from previous structural and single-molecule data. Moreover, our results demonstrate how conformational changes in individual enzymes can be deduced from their ensemble properties. Single-molecule experiments have been used with great success to explore the mechanochemical cycles of processive motor proteins such as kinesin-1, but it has proven difficult to apply these approaches to nonprocessive motors. Therefore, the mechanochemical cycle of kinesin-14 (ncd) is still under debate. Here, we use the readout from the collective activity of multiple motors to derive information about the mechanochemical cycle of individual ncd motors. In gliding motility assays we performed 3D imaging based on fluorescence interference contrast microscopy combined with nanometer tracking to simultaneously study the translation and rotation of microtubules. Microtubules gliding on ncd-coated surfaces rotated around their longitudinal axes in an [ATP]- and [ADP]-dependent manner. Combined with a simple mechanical model, these observations suggest that the working stroke of ncd consists of an initial small movement of its stalk in a lateral direction when ADP is released and a second, main component of the working stroke, in a longitudinal direction upon ATP binding.