Andrzej Ejchart

Structural studies of HIV-1 tat protein

Tat (trans-activator) proteins are early RNA binding proteins regulating lentiviral transcription. These proteins are necessary components in the life cycle of all known lentiviruses, such as the human immunodeficiency viruses (HIV) or the equine infectious anemia virus (EIAV). Tat proteins are thus ideal targets for drugs intervening with lentiviral growth. The consensus RNA binding motif (TAR, trans-activation responsive element) of HIV-1 is well characterized. Structural features of the 86 amino acid HIV-1, Zaire 2 isolate (HV1Z2) Tat protein in solution were determined by two dimensional (2D) nuclear magnetic resonance (NMR) methods and molecular dynamics (MD) calculations. In general, sequence regions corresponded to structural domains of the protein. It exhibited a hydrophobic core of 16 amino acids and a glutamine-rich domain of 17 amino acids. Part of the NH2 terminus, Val4 to Pro14, was sandwiched between these domains. Two highly flexible domains corresponded to a cysteine-rich and a basic sequence region. The 16 amino acid sequence of the core region is strictly conserved among the known Tat proteins, and the three-dimensional fold of these amino acids of HV1Z2 Tat protein was highly similar to the structure of the corresponding EIAV Tat domain. HV1Z2 Tat protein contained a well defined COOH-terminal Arg-Gly-Asp (RGD) loop similar to the recently determined decorsin RGD loop.

Water solubilization, determination of the number of different types of single-wall carbon nanotubes and their partial separation with respect to diameters by complexation with η-cyclodextrin

Complexation of single-wall carbon nanotubes with 12-membered cyclodextrins enables not only their solubilization in water but also their partial separation with respect to diameters and determination of the number of nanotube types on the basis of NMR spectra.

Secondary Structure and Tertiary Fold of the Birch Pollen Allergen Bet v 1 in Solution

Bet v 1 is the major birch pollen allergen and therefore the main cause of type I allergies observed in early spring. It is composed of 159 amino acid residues adding up to a molecular mass of 17 kDa. We determined the secondary structure and tertiary fold of full-length Bet v 1 by NMR spectroscopy. Two- and three-dimensional NMR measurements suggest that Bet v 1 is a globular monomer in solution with a high content of well defined secondary structure. Of the total of 159 residues, 135 could be sequentially assigned, using an improved assignment strategy based mainly on heteronuclear experiments. An improved strategy for structure calculation revealed three helices and two β-sheets as major elements of secondary structure. The globular tertiary structure is mainly stabilized by two antiparallel β-sheets. The two helices at the C terminus are in accordance with the results from the solution structure of the chemically synthesized peptide Bet v 1-(125-154). This peptide is composed of two helices connected by a hinge. The structural features of Bet v 1 are highly similar to those found in the Ambrosia allergen Amb t V.

Structure and Dynamics of the First Archaeal Parvulin Reveal a New Functionally Important Loop in Parvulin-type Prolyl Isomerases

Parvulins are a group of peptidyl-prolyl isomerases (PPIases) responsible for important biological processes in all kingdoms of life. The PinA protein from the psychrophilic archaeon Cenarchaeum symbiosum is a parvulin-like PPIase. Due to its striking similarity to the human parvulins Pin1 and Par14, PinA constitutes an interesting subject for structural and functional studies. Here, we present the first high resolution NMR structure of an archaeal parvulin, PinA, based on 1798 conformational restraints. Structure calculation yields an ensemble of 20 convergent low energy structures with a backbone r.m.s.d. value of 0.6 Å within the secondary structure elements. The overall fold of PinA comprises the β-α3-β-α-β2 fold typical for all parvulin structures known so far, but with helix III being a short 310-helix. A detailed comparison of this high resolution structure of the first archaeal PinA protein with bacterial and eukaryotic parvulin PPIase structures reveals an atypically large catalytic binding site. This feature provides an explanation for cold-adapted protein function. Moreover, the residues in and around 310-helix III exhibit strong intramolecular dynamics on a microsecond to millisecond timescale and display structural heterogeneity within the NMR ensemble. A putative peptide ligand was found for PinA by phage display and was used for 1H-15N-HSQC titrations. Again, the flexible region around 310-helix III as well as residues of the peptide binding pocket showed the strongest chemical shift perturbations upon peptide binding. The local flexibility of this region also was modulated by ligand binding. A glycine and two positively charged residues are conserved in most parvulin proteins in this flexible loop region, which may be of general functional importance for parvulin-type PPIases.

Complex formation of fenchone with α-cyclodextrin: NMR titrations

Abstract13C NMR titration studies of inclusion complexes of bicyclic terpenoid, fenchone enantiomers with α-cyclodextrin revealed their 1:2 guest–host stoichiometry. Sequential binding constants were determined indicating a strong binding cooperativity of two α-cyclodextrin to fenchone. The overall association constants were used to calculate the Gibbs free energies of diastereomeric complex formation, which might be used as a measure of chiral recognition of fenchone by α-cyclodextrin. These results were compared with corresponding data derived for camphor, which is an isomeric bicyclic terpenoid.

Synthesis and receptor binding of opioid peptide analogues containing β3-homo-amino acids

β‐Amino acids containing hybrid peptides and β‐peptides show great potential as peptidomimetics. In this paper we describe the synthesis and affinity toward the µ‐ and δ‐opioid receptors of β‐peptides, analogues of Leu‐enkephalin, deltorphin I, dermorphin and α,β‐hybrides, analogues of deltorphin I. Substitution of α‐amino acid residues with β3‐homo‐amino acid residues, in general resulted in decrease of affinity to opioid receptors. However, the incorporation β3h‐D‐Ala in position 2 or β3hPhe in position 3 of deltorphin I resulted in potent and selective ligand for δ‐opioid receptor. The NMR studies of β‐deltorphin I analogue suggest that conformational motions in the central part of the peptide backbone are partially restricted and some conformational preferences can be expected. Copyright

Solution structure of porcine delta sleep-inducing peptide immunoreactive peptide A homolog of the shortsighted gene product.

The 77-residue delta sleep-inducing peptide immunoreactive peptide (DIP) is a close homolog of the Drosophila melanogaster shortsighted gene product. Porcine DIP (pDIP) and a peptide containing a leucine zipper-related partial sequence of pDIP, pDIP(9–46), was synthesized and studied by circular dichroism and nuclear magnetic resonance spectroscopy in combination with molecular dynamics calculations. Ultracentrifugation, size exclusion chromatography, and model calculations indicated that pDIP forms a dimer. This was confirmed by the observation of concentration-dependent thermal folding-unfolding transitions. From CD spectroscopy and thermal folding-unfolding transitions of pDIP(9–46), it was concluded that the dimerization of pDIP is a result of interaction between helical structures localized in the leucine zipper motif. The three-dimensional structure of the protein was determined with a modified simulated annealing protocol using experimental data derived from nuclear magnetic resonance spectra and a modeling approach based on an established strategy for coiled coil structures. The left-handed super helical structure of the leucine zipper type sequence resulting from the modeling approach is in agreement with known leucine zipper structures. In addition to the hydrophobic interactions between the amino acids at the heptade positions a and d, the structure of pDIP is stabilized by the formation of interhelical i to i′ + 5 salt bridges. This result was confirmed by the pH dependence of the thermal-folding transitions. In addition to the amphipatic helix of the leucine zipper, a second helix is formed in the NH2-terminal part of pDIP. This helix exhibits more 310-helix character and is less stable than the leucine zipper helix. For the COOH-terminal region of pDIP no elements of regular secondary structure were observed.

Application of power spectra to lineshape analysis in NMR spectroscopy

Abstract The advantage of using power spectra instead of absorption spectra for lineshape analysis is discussed. It is demonstrated that values of fitted parameters and their accuracy are worse for absorption spectra exhibiting phase shift than for power spectra when the least-squares method is used. This is because the phase distortions which occur in absorption spectra are eliminated in power spectra. On the other hand, results obtained for absorption spectra without phase shift are comparable to those obtained for power spectra. The influence of noise on the results is also discussed.

Solution NMR structure and dynamics of human apo-S100A1 protein

S100A1 belongs to the EF-hand superfamily of calcium binding proteins. It is a representative of the S100 protein family based on amino acid sequence, three-dimensional structure, and biological function as a calcium signal transmitter. It is a homodimer of noncovalently bound subunits. S100A1, like most of other members of the S100 protein family, is a multifunctional, regulatory protein involved in a large variety of biological processes and closely associated with several human diseases. The three-dimensional structure of human apo-(i.e. calcium free)-S100A1 protein was determined by NMR spectroscopy (PDB 2L0P) and its backbone dynamics established by ¹⁵N magnetic relaxation. Comparison of these results with the structure and backbone dynamics previously determined for bovine apo-S100A1 protein modified by disulfide formation with β-mercaptoethanol at Cys 85 revealed that the secondary structure of both these proteins was almost identical, whereas the global structure of the latter was much more mobile than that of human apo-S100 protein. Differences between the structures of human and rat apo-S100A1 are also discussed.

Extended inversion-recovery method for spin-lattice relaxation measurements. A key to accurate T1 determination

Since the results of the methods used so far for measurement of spin-lattice relaxation times T1 are not always correct, a new sequence, the extended inversion-recovery (EIRFT) method is proposed. It involves addition of a variable perturbing pulse to the conventional two-pulse sequence and can be easily implemented in modern NMR spectrometers. It was demonstrated that T1 measurements performed on 13C nuclei of ethylene glycol by the use of IRFT and FIRFT methods showed a remarkable scattering of T1 values which was significantly decreased by application of the EIRFT method.