Anja Schallon

Influence of Polymer Architecture and Molecular Weight of Poly(2-(dimethylamino)ethyl methacrylate) Polycations on Transfection Efficiency and Cell Viability in Gene Delivery

Nonviral gene delivery with the help of polycations has raised considerable interest in the scientific community over the past decades. Herein, we present a systematic study on the influence of the molecular weight and architecture of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) on the transfection efficiency and the cytotoxicity in CHO-K1 cells. A library of well-defined homopolymers with a linear and star-shaped topology (3- and 5-arm stars) was synthesized via atom transfer radical polymerization (ATRP). The molecular weights of the polycations ranged from 16 to 158 kDa. We found that the cytotoxicity at a given molecular weight decreased with increasing number of arms. For a successful transfection a minimum molecular weight was necessary, since the polymers with a number-average molecular weight, M(n), below 20 kDa showed negligible transfection efficiency at any of the tested polyelectrolyte complex compositions. From the combined analysis of cytotoxicity and transfection data, we propose that polymers with a branched architecture and an intermediate molecular weight are the most promising candidates for efficient gene delivery, since they combine low cytotoxicity with acceptable transfection results.

Dual-responsive magnetic core-shell nanoparticles for nonviral gene delivery and cell separation.

We present the synthesis of dual-responsive (pH and temperature) magnetic core-shell nanoparticles utilizing the grafting-from approach. First, oleic acid stabilized superparamagnetic maghemite (γ-Fe(2)O(3)) nanoparticles (NPs), prepared by thermal decomposition of iron pentacarbonyl, were surface-functionalized with ATRP initiating sites bearing a dopamine anchor group via ligand exchange. Subsequently, 2-(dimethylamino)ethyl methacrylate (DMAEMA) was polymerized from the surface by ATRP, yielding dual-responsive magnetic core-shell NPs (γ-Fe(2)O(3)@PDMAEMA). The attachment of the dopamine anchor group on the nanoparticles surface is shown to be reversible to a certain extent, resulting in a grafting density of 0.15 chains per nm(2) after purification. Nevertheless, the grafted NPs show excellent long-term stability in water over a wide pH range and exhibit a pH- and temperature-dependent reversible agglomeration, as revealed by turbidimetry. The efficiency of γ-Fe(2)O(3)@PDMAEMA hybrid nanoparticles as a potential transfection agent was explored under standard conditions in CHO-K1 cells. Remarkably, γ-Fe(2)O(3)@PDMAEMA led to a 2-fold increase in the transfection efficiency without increasing the cytotoxicity, as compared to polyethyleneimine (PEI), and yielded on average more than 50% transfected cells. Moreover, after transfection with the hybrid nanoparticles, the cells acquired magnetic properties that could be used for selective isolation of transfected cells.

Magnetic and fluorescent glycopolymer hybrid nanoparticles for intranuclear optical imaging.

The synthesis of galactose-displaying core-shell nanospheres exhibiting both fluorescent and magnetic properties by grafting a glycocopolymer consisting of 6-O-methacryloylgalactopyranose (MAGal) and 4-(pyrenyl)butyl methacrylate (PyMA) onto magnetic silica particles via thiol-ene chemistry is reported. Magnetization measurements indicated that neither the encapsulation of the iron oxide particles into silica nor the grafting of the glycocopolymer chains had a significant influence on the superparamagnetic properties. This not only simplifies the purification of the particles but may facilitate the use of the particles in applications such as hyperthermia or magnetic resonance imaging (MRI). Furthermore, the hydrophilic glycopolymer shell provided solubility of the particles in aqueous medium and enabled the uptake of the particles into the cytoplasm and nucleus of lung cancer cells via carbohydrate-lectin recognition effects.

Nanoparticulate Nonviral Agent for the Effective Delivery of pDNA and siRNA to Differentiated Cells and Primary Human T Lymphocytes

Delivery of polynucleotides such as plasmid DNA (pDNA) and siRNA to nondividing and primary cells by nonviral vectors presents a considerable challenge. In this contribution, we introduce a novel type of PDMAEMA-based star-shaped nanoparticles that (i) are efficient transfection agents in clinically relevant and difficult-to-transfect human cells (Jurkat T cells, primary T lymphocytes) and (ii) can efficiently deliver siRNA to human primary T lymphocytes resulting to more than 40% silencing of the targeted gene. Transfection efficiencies achieved by the new vectors in serum-free medium are generally high and only slightly reduced in the presence of serum, while cytotoxicity and cell membrane disruptive potential at physiological pH are low. Therefore, these novel agents are expected to be promising carriers for nonviral gene transfer. Moreover, we propose a general design principle for the construction of polycationic nanoparticles capable of delivering nucleic acids to the above-mentioned cells.

Clickable, Biocompatible, and Fluorescent Hybrid Nanoparticles for Intracellular Delivery and Optical Imaging

We report a general and facile approach for the fabrication of a new class of near monodisperse hybrid nanoparticles via RAFT polymerization and self-assembly in water. Furthermore, we combine a fluorescent inorganic silica core with a biocompatible polymer shell and a terminal unit susceptible to facile conjugations via click chemistry. A tailoring of the weight fractions of both components allows a tuning of the size of the formed aggregates. Fluorescent properties and the crosslinking into an organic-inorganic hybrid network are realized by copolymerizing a dye-functionalized monomer 1-pyrenebutyl acrylate and a trimethoxysilane-carrying one, (3-acryloxypropyl)trimethoxysilane. The potential of these stabilized and fluorescent nanoparticles as biocompatible carriers for intracellular delivery is demonstrated via in vitro experiments on lung cancer cells.

A Paradigm Change: Efficient Transfection of Human Leukemia Cells by Stimuli-Responsive Multicompartment Micelles

The controlled nonviral delivery of genetic material using cationic polymers into cells has been of interest during the past three decades, yet the ideal delivery agent featuring utmost transfection efficiency and low cytotoxicity still has to be developed. Here, we demonstrate that multicompartment micelles from stimuli-responsive triblock terpolymers, polybutadiene-block-poly(methacrylic acid)-block-poly(2-(dimethylamino)ethyl methacrylate) (BMAAD), are promising candidates. The structures exhibit a patchy shell, consisting of amphiphilic (interpolyelectrolyte complexes, MAA and D) and cationic patches (excess D), generating a surface reminiscent to those of certain viruses and capable of undergoing pH-dependent changes in charge stoichiometry. After polyplex formation with plasmid DNA, superior transfection efficiencies can be reached for both adherent cells and human leukemia cells. Compared to the gold standard PEI, remarkable improvements and a number of advantages were identified for this system, including increased cellular uptake and an improved release of the genetic material, accompanied by fast and efficient endosomal escape. Furthermore, high sedimentation rates might be beneficial regarding in vitro applications.

Star-shaped drug carriers for doxorubicin with POEGMA and POEtOxMA brush-like shells: a structural, physical, and biological comparison.

The synthesis of amphiphilic star-shaped poly(ε-caprolactone)-block-poly(oligo(ethylene glycol)methacrylate)s ([PCL(18)-b-POEGMA](4)) and poly(ε-caprolactone)-block-poly(oligo(2-ethyl-2-oxazoline)methacrylate)s ([PCL(18)-b-POEtOxMA](4)) is presented. Unimolecular behavior in aqueous systems is observed with the tendency to form loose aggregates for both hydrophilic shell types. The comparison of OEGMA and OEtOxMA reveals that the molar mass of the macromonomer in the hydrophilic shell rather than the mere length is the crucial factor to form an efficiently stabilizing hydrophilic shell. A hydrophilic/lipophilic balance of 0.8 is shown to stabilize unimolecular micelles in water. An extensive in vitro biological evaluation shows neither blood nor cytotoxicity. The applicability of the polymers as drug delivery systems was proven by the encapsulation of the anticancer drug doxorubicin, whose cytotoxic effect was retarded in comparison to the free drug.

DNA Melting Temperature Assay for Assessing the Stability of DNA Polyplexes Intended for Nonviral Gene Delivery

Many synthetic polycations have the ability to form complexes with the polyanion DNA, yet only a few, most notably poly(ethylene imine) (PEI), are efficient gene-delivery vehicles. Although a common explanation of this observation relies on the buffering capacity of the polycation, the intracellular stability of the complex may also play a role and should not be neglected. Assays typically used to follow complex formation, however, often do not provide the required information on stability. In this article, we propose the change in the DNA melting temperature observable after complex formation to be a significant indicator of complex stability. For a given DNA/polycation ratio, changes in the melting temperature are shown to depend on the polycation chemistry but not on the DNA topology or the polycation architecture. Effects of changes in the DNA/polycation ratio as well as the effect of polycation quaternization can be interpreted using the melting temperature assay. Finally, the assay was used to follow the displacement of DNA from the complexes by poly(methacrylic acid) or short single-stranded DNA sequences as competing polyanions.

A toolbox of differently sized and labeled PMMA nanoparticles for cellular uptake investigations

The cellular internalization of defined PMMA nanoparticles was investigated. For this purpose, the biocompatible copolymer p(MMA-stat-MAA)0.91:0.09 was synthesized by RAFT polymerization and labeled with three different fluorescent dyes (λEx = 493, 557, and 653 nm). Nanoparticles were formulated from the differently labeled copolymers into samples with relatively narrow size distribution (diameter d 300 nm) under appropriate conditions of nanoprecipitation and were subsequently characterized by DLS and SEM. Mixtures of the differently sized nanoparticle samples were applied for internalization studies using monolayer cultured HeLa cells. The localization of the nanoparticles was detected after certain time points up to 24 h by CLSM, using LysoTracker as a marker for late endosomes and lysosomes. In investigations by flow cytometry, a fast uptake of medium sized nanoparticles was found, whereas the large and small nanoparticles exhibited a slower internalization. However, small and medium sized nanoparticles were detected in the late endosomes/lysosomes, whereas the large nanoparticles exhibit little co-localization with LysoTracker. Moreover, it could be shown by using different inhibitors for clathrin-dependent (chlorpromazine), caveolin-dependent (filipin III) endocytosis and macropinocytosis (EIPA) that nanoparticles with d 300 nm were internalized via macropinocytosis.

Characterization of cationic polymers by asymmetric flow field-flow fractionation and multi-angle light scattering-A comparison with traditional techniques.

In the field of nanomedicine, cationic polymers are the subject of intensive research and represent promising carriers for genetic material. The detailed characterization of these carriers is essential since the efficiency of gene delivery strongly depends on the properties of the used polymer. Common characterization methods such as size exclusion chromatography (SEC) or mass spectrometry (MS) suffer from problems, e.g. missing standards, or even failed for cationic polymers. As an alternative, asymmetrical flow field-flow fractionation (AF4) was investigated. Additionally, analytical ultracentrifugation (AUC) and (1)H NMR spectroscopy, as well-established techniques, were applied to evaluate the results obtained by AF4. In this study, different polymers of molar masses between 10 and 120kgmol(-1) with varying amine functionalities in the side chain or in the polymer backbone were investigated. To this end, some of the most successful gene delivery agents, namely linear poly(ethylene imine) (LPEI) (only secondary amines in the backbone), branched poly(ethylene imine) (B-PEI) (secondary and tertiary amino groups in the backbone, primary amine end groups), and poly(l-lysine) (amide backbone and primary amine side chains), were characterized. Moreover, poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA), poly(2-(amino)ethyl methacrylate) (PAEMA), and poly(2-(tert-butylamino)ethyl methacrylate) (PtBAEMA) as polymers with primary, secondary, and tertiary amines in the side chain, have been investigated. Reliable results were obtained for all investigated polymers by AF4. In addition, important factors for all methods were evaluated, e.g. the influence of different elution buffers and AF4 membranes. Besides this, the correct determination of the partial specific volume and the suppression of the polyelectrolyte effect are the most critical issues for AUC investigations.